The curses dialog (ccmake) allows variables to be specified on the
command line. If any of these variables is used during any configure
iteration or during generate we must not warn about it.
The Qt dialog (cmake-gui) allows variables to be added and removed in
the GUI interactively. If a variable is added, removed, and then added
again we must still warn if it is unused.
With this commit, the --graphviz option now also generates dot files
which show which other targets depend on some target.
So, now there is
* a global dot-file which shows all targets and dependencies
* a dot file which shows on what a target Foo depends
* a dot file which shows which other targets depend on Foo
Alex
8b143fa Condense parsing of cache entries
122ebf1 Support manual cache entries
90abc3a Use cmCacheManager to load entries from the cache
6fe8624 Fix parsing of cache variables without a type
The big all-in-one file is basically unusable for e.g. kdelibs, it contains
around 1000 nodes and the created image is huuuuge !
Too big actually to be displayable or viewable or comprehensable.
Alex
Visual Studio Express editions do not support solution folders,
so default behavior should be as if USE_FOLDERS global property
is OFF.
Also, allow folder names to be the same as target names: internally,
use a prefix to distinguish folder GUIDs from target GUIDs. Add
a target and folder with the same name in the ExternalProject
test to exercise this code.
For CMake itself, provide a new option CMAKE_USE_FOLDERS that
defaults to ON so that Visual Studio users get a nicely organized
CMake project. Express edition users will have to turn off the
CMAKE_USE_FOLDERS option in order to build CMake in the VS Express
IDE.
OK, on windows 7 after we untar some files,
sometimes we can not rename the directory after
the untar is done. This breaks the external project
untar and rename code. So, by default we will wait
1/10th of a second after the untar. If CMAKE_UNTAR_DELAY
is set in the env, its value will be used instead of 100.
This work was started from a patch by Thomas Schiffer.
Thanks, Thomas!
See the newly added documentation of the FOLDER target
property for details.
Also added global properties, USE_FOLDERS and
PREDEFINED_TARGETS_FOLDER. See new docs here, too.
By default, the FOLDER target property is used to organize
targets into folders in IDEs that have support for such
organization.
This commit adds "solution folder" support to the Visual
Studio generators. Currently works with versions 7 through
10.
Also, use the new FOLDER property in the ExternalProject
test and in the CMake project itself.
This is especially important for the Visual Studio 10
generator and its quirky current working directory
behavior.
Also, emit more information about exactly what files are
out of date when cmakeCheckStampFile returns false.
Commit 02f7cfbc (Need to remove the MAKEFLAGS when cmake starts,
2003-05-13) removed the MAKEFLAGS environment variable when CMake starts
to prevent try_compile() from inheriting "make -i". This is unnecessary
in script mode (cmake -P). Instead remove the variable only when
configuring a project.
The Eclipse and KDevelop generators set the VERBOSE environment variable to
TRUE in the project files, because they must be able to "see" the full
command lines and errors, otherwise they can't parse the errors. But the
VERBOSE env.var. also enables cmakes own verbose output, which can be quite
long. This commit introduces an environment variable CMAKE_NO_VERBOSE, which
when set disables cmake's verbose output also when VERBOSE is set. This
env.var is now set by both the Eclipse and the KDevelop generators.
Alex
The DumpDocumentation executable and some supporting code and tests were
completely unused by CMake. Generation of documentation is done by the
individual executables with --help* options. In this commit we simply
remove the unused code, executable, and test.
Versioned UNIX libraries and executables produce multiple names for a
single target using one of
cmake -E cmake_symlink_library
cmake -E cmake_symlink_executable
to create symlinks to the real file for the extra names. However, when
cross-compiling from Windows to Linux we cannot create symlinks. This
commit teaches CMake to make copies instead of symbolic links when
running on windows. While this approach does not produce exactly what
Linux wants to see, at least the build will complete and the binary will
run on the target system. See issue #9171.
We factor the implementation of
cmake -E cmake_symlink_library
cmake -E cmake_symlink_executable
out of cmake::ExecuteCMakeCommand into methods
cmake::SymlinkLibrary
cmake::SymlinkExecutable
plus a helper method cmake::SymlinkInternal.
The commit "Really fix color check for dependency scanning" disabled
color unless "make COLOR=ON" is specified. This restores the previous
default behavior when CMAKE_COLOR_MAKEFILE is ON while retaining the
previous commit's fix. See issue #9680.
The commit "Fix color check for dependency scanning" was meant to
disable color if CMAKE_COLOR_MAKEFILE was off. It did remove use of the
activation option '--color' but it failed to make the default false when
the option was missing. This commit corrects that. See issue #9680.
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
The commit "Remove barely-used cmMakefile::AddCacheDefinition" removed
all but one use of the cmCacheManager method 'bool' overload. This
commit removes the other use and the entire method, thus reducing code
duplication.
When CMake is invoked by the VS IDE re-run rule we compute whether or
not CMake really needs to re-run based on some timestamp helper files.
Previously we assumed that if the main generate.stamp file exists then
VS has correctly detected that the file is out of date. However, this
assumption is too aggressive and re-runs CMake unnecessarily sometimes.
This commit removes the assumption and always checks timestamps itself.
The change breaks the explicit user re-run request (R-click -> Compile)
but only in cases when the build system is already up to date.
All global generator CreateLocalGenerator methods automatically
initialize the local generator instances with SetGlobalGenerator. In
several places we were calling SetGlobalGenerator again after receiving
the return value from CreateLocalGenerator. The double-initializations
leaked the resources allocated by the first call to SetGlobalGenerator.
This fix removes the unnecessary calls.
This extends the "-E" command line mode with a "rename old new"
signature. The new command atomically renames a file or directory
within a single disk volume.
This creates global property RULE_MESSAGES which can be set to disbale
per-rule progress and action reporting. On Windows, these reports may
cause a noticable delay due to the cost of starting extra processes.
This feature will allow scripted builds to avoid the cost since they do
not need detailed information anyway. This replaces the RULE_PROGRESS
property created earlier as it is more complete. See issue #8726.
This creates global property RULE_PROGRESS which can be set to disbale
per-rule progress reporting. On Windows, progress reports may cause a
noticable delay due to the cost of starting an extra process. This
feature will allow scripted builds to avoid the cost since they do not
need detailed progress anyway. See issue #8726.
This moves the version numbers into an isolated configured header so
that not all of CMake needs to rebuild when the version changes.
Previously we had spaces, dashes and/or the word 'patch' randomly chosen
before the patch number. Now we always report version numbers in the
traditional format "<major>.<minor>.<patch>[-rc<rc>]".
We still use odd minor numbers for development versions. Now we also
use the CCYYMMDD date as the patch number of development versions, thus
allowing tests for exact CMake versions.
This cleans up the 'cmake --build' command-line interface:
- Rename --clean to --clean-first to better describe it.
- Replace --extra-options with a -- separator to simplify passing of
multiple native build tool options.
- Document the options in the main CMake man page description of the
--build option, and shares this with the usage message.
- Require --build to be the first argument when present.
- Move implementation into cmakemain where it belongs.
This teaches the helper commands 'cmake -E cmake_symlink_executable' and
'cmake -E cmake_symlink_library' to remove broken symlinks before
creating a symlink and report an error when the symlink cannot be
created. See issue #8654.
This defines global, directory, and target properties
RULE_LAUNCH_COMPILE, RULE_LAUNCH_LINK, and RULE_LAUNCH_CUSTOM. Their
values specify 'launcher' command lines which are prefixed to compile,
link, and custom build rules by Makefile generators.
When testing whether to re-run CMake, a byproduct may be a symlink. If
so, the existence of the link is important rather than the link's
target. See issue #8465.
App Bundle and Framework directories, symlinks, and Info.plist files we
create during generation are byproducts, not outputs. We should re-run
CMake only when they are missing, not when they are old.
See issue #8465.
This teaches cmMakefile::GetProperty and cmake::GetProperty methods to
return NULL when the property name is NULL, making them more robust and
consistent with the behavior of cmTarget::GetProperty.
Brad King
David Cole
Alex Neundorf
Ben Boeckel
Bill Hoffman
Kai Wasserbäch
Zach Mullen