Revert commit 6fac24d7 (Ninja: Avoid re-running CMake on next build
after regeneration, 2014-01-09). The files reported by the method
cmMakefile::GetOutputFiles() must cause CMake to re-run only if they are
missing and without considering a timestamp. Therefore they cannot be
listed as outputs of the re-run rule or Ninja will re-run CMake every
time because the timestamp of configure_file outputs does not change.
Another solution will have to be found to the original problem.
2cbf0311 cmGlobalGenerator: Make SelectMakeProgram const.
b4ff38a5 cmGlobalGenerator: Make CheckALLOW_DUPLICATE_CUSTOM_TARGETS const
8aeddf1f cmGlobalGenerator: Make some API const.
8fd0f2a7 cmGeneratorTarget: Hold a const global generator.
46315320 cmComputeLinkDepends: Hold a const global generator.
In commit 4a6397a7 (Ninja: Track configured files so we can regenerate
them, 2013-06-17) we accidentally started listing files generated by
CMake as inputs to the configuration process instead of outputs from it.
Move the list of files generated by CMake to the regeneration rule
outputs section and tell Ninja to restat after running it.
Create cmGeneratorTargets before generating generate-time information.
C++ interfaces for querying build information is increasingly only
available at generate time through the cmGeneratorTarget class. Ensure
that the required cmGeneratorTarget instances are created. Use the
cmGlobalGenerator access API to access the relevant cmGeneratorTarget
instead of creating a temporary one on the stack.
73e9340 get_target_property: Error on non-existent target.
ab9f58f FindQt4: Ensure target exists before calling get_target_property.
37ebeb9 FindQt4: Fix use of get_target_property to use actual target name.
6aabb6a Genex: Use case-sensitive comparison for COMPILER_ID.
5bb53f6 cmTarget: Deprecate COMPILE_DEFINITIONS_ properties with a policy.
The implementation of the "cmake --help-custom-modules" was removed
along with the rest of the old help generation infrastructure when
documentation was converted to reStructuredText. In order to avoid
breaking existing project builds outright when they use a custom command
that runs a command like "cmake --help-custom-modules foo.1", generate
the requested file with placeholder content explaining that the option
is not supported anymore.
In VS <= 9 we already convert include paths to use backslashes
but the conversion was left out of the VS >= 10 generator.
Add the conversion now for consistency. VS 11 and 12 now require
it because they mistakenly interpret forward-slash options that
happen to occur in paths:
http://connect.microsoft.com/VisualStudio/feedback/details/778367
Since commit 56831461 (Xcode: Use explicitFileType to mark source types,
2013-04-16) the Xcode generator prefers to use explicitFileType to tell
Xcode about each source file type. This works better than
lastKnownFileType for some file types, but not for "file.storyboard".
If storyboard file has attribute 'explicitFileType' it is displayed
incorrectly (as raw xml). Switch it back to 'lastKnownFileType'.
3917d86 Genex: Add a nullary form for CONFIG
5169130 Help: Document the target properties exported to IMPORTED targets.
ee21f1c CompatibleInterface: Test debugging of not-set property.
80e9fe9 Help: Note that language-specific 'built-ins' are set by the project command.
0b5bf8a Help: Mention CMAKE_DISABLE_FIND_PACKAGE_<PackageName> in package docs.
28c865b Tests: simplify Qt4 target usage
6cfe6b8 Help: Fix typo: 'target' -> 'target property'
b7deca4 Test: Remove obsolete commented code.
9c9f69f Genex: Make EQUAL support upper case binary literals
6eb3218 Genex: Fix case of methods in the dag checker.
646c6ec Genex: Use a preprocessor loop to implement transitive DAG check.
711fb38 Genex: List transitive properties and methods as a table, not two lists.
802a28f Add cmHasLiteralSuffix API.
This is consistent with other similar expressions such as PLATFORM_ID,
and makes the CONFIGURATION expression obsolete.
Fix an off-by-one error in
GeneratorExpressionContent::EvaluateParameters exposed by a unit test.
Remove the test for 'bad' nullary use of $<CONFIG>.
Add a unit test to verify that $<CONFIG> and $<CONFIGURATION> have
the same value.
The other infrastructure for transitive property handling is
already using a preprocessor loop.
Implement special backward-compatibility handling of
COMPILE_DEFINITIONS_<CONFIG> using a template switch for the
extra check.
As a new feature it does not need to participate in CMP0024.
Store cmExportBuildFileGenerator instances which correspond to the
export(EXPORT) signature in a second map which does not own the
pointers. This avoids the need to add cmExportBuildFileGenerator
and dependencies to the bootstrap system.
Direct users of IMPORTED targets treat INTERFACE_INCLUDE_DIRECTORIES
as SYSTEM, after commit a63fcbcb (Always consider includes from IMPORTED
targets to be SYSTEM., 2013-08-29). It was intended that transitive
use of an IMPORTED target would have the same behavior, but that
did not work. The implementation processed only direct dependencies
in cmTarget::FinalizeSystemIncludeDirectories.
Implement transitive evaluation of dependencies by traversing the
link interface of each target in the link implementation.
The error messages were incorrect (reporting that the expression
requires one or two parameters), and repeated. Remove the now-unused
ZeroOrMoreParameters enum value.
There is no need to allow EXCLUDE_* properties, because an
INTERFACE_LIBRARY has no direct build output.
IMPORTED_LINK_INTERFACE_LANGUAGES are relevant only to static
libraries.
VERSION is relevant only to the filename of direct build outputs,
which INTERFACE_LIBRARY does not have.
If the dependent target sets the property to boolean false, ensure
that that appears in the debug report. Previously, the report
output contained whether the property was consistent among dependencies,
displaying 'TRUE', instead of the content of the property, which may
be 'FALSE'.
Return a std::pair from the consistentProperty method. This makes
it possible to make the return value for string types easier to
reason about. The return value of consistentProperty was previously
set to an empty static string to emulate a 'true' value for the caller
in commit 816b4a8a (cmTarget: Make consistentProperty
return consistent content., 2013-10-22). The pair makes the
consistency result properly typed.
Don't refer to 'both', but a 'mixture'. List all compatible interface
property types possible.
Add another test for a mixture of three compatibilities.
The include_directories() and add_compile_options() commands
should not append to the corresponding target property for IMPORTED
targets. This is already the case for add_definitions().
The modern way to create configuration dependent content is using
generator expressions in the main export file. The only non-deprecated
property still generated in the configuration-specific files are
IMPORTED_LOCATION_<CONFIG>
INTERFACE_LIBRARY targets have no location, and no need for those
files.
The next version is 3.0.0, not 2.8.13.
The version generated in the export file should be updated in
the release branch in both cmExportInstallFileGenerator and
cmExportBuildFileGenerator.
37104d9 kate: put full path to cmake into comment
424d5dc kate: support also the build plugin in kate <= 4.12
8bd6cf0 kate: the prev_target is not used by kate
The <OBJECT_DIR> placeholder is supposed to be the base intermediate
files directory for the current target. This is how it gets replaced
during link line generation. However, during compile line generation
we replace it with the directory containing the current object file
which may be a subdirectory. Fix replacement of <OBJECT_DIR> in the
generated compile lines to be the base intermediate files directory.
This was expoxed by commit 42ba1b08 (VS: Separate compiler and linker
PDB files, 2013-04-05) when we added a "/Fd<OBJECT_DIR>/" flag to the
MSVC compile line in order to match the VS IDE default compiler program
database location in the intermediate files directory. For source files
in a subdirectory relative to the current target this caused the wrong
location to be used for the compiler program database. This becomes
particularly important when using precompiled headers.
While at it, use the cmTarget::GetSupportDirectory method to compute the
intermediate files directory for the current target instead of repeating
the logic in a few places.
With this patch, cmake now puts the MachO64 bit
binary file parser into the config file if the detected
Eclipse is at least Helios (7.0), otherwise with the old
parser executables will not be recognized by Eclipse.
Alex
With this patch, simply also the information used
by the build plugin in kate <= 4.12 is put into the
generated json file. The new build plugin (coming
in 4.13) simply ignores this (and vice versa).
Alex
Teach the export command to handle export sets defined by invocations
of install(TARGETS ... EXPORT foo). This makes maintenance of targets
exported to both the build tree and install tree trivial.
The first regression resulted in endless looping due to unrun test
dependencies. The second regression prioritized all tests with dependencies
in serial test runs.
Populate a separate vector of files and append them separately. This
was the pattern used prior to commit 035b6908 (Autogen: Split AutoRcc
handling into two methods, 2013-12-10), which was erroneously not
maintained in that refactoring.
The parent commit changed the AutogensType::value_type to be
"std::pair<cmQtAutoGenerators,cmTarget const*>" but our std::make_pair
call returns "std::pair<cmQtAutoGenerators,cmTarget*>". Construct the
value_type directly instead of using make_pair. Otherwise the Sun 5.9
compiler complains
".../Source/cmGlobalGenerator.cxx", line 1281: Error:
Formal argument x of type "const std::pair<cmQtAutoGenerators, const cmTarget*>&"
in call to "std::vector<std::pair<cmQtAutoGenerators, const cmTarget*> >
::push_back(const std::pair<cmQtAutoGenerators, const cmTarget*>&)" is being
passed "std::pair<cmQtAutoGenerators, cmTarget*>".
Add the .NOTPARALLEL target to each local Makefile command-line
interface entry point file so that even with -j we launch only
one "make -f Makefile2" at a time. The actual build rules
in Makefile2 and lower will still run in parallel.
Do not add .NOTPARALLEL for Borland or Watcom make tools because
they do not tolerate it. Other make tools that do not understand
.NOTPARALLEL will not be hurt.
Suggested-by: Robert Luberda <robert-cmake@debian.org>
The properties object has just been created, so is always empty,
which means the if block is never entered. The following lines do
not have any effect because an INTERFACE library has no LOCATION.
At the end, no code is generated for INTERFACE libraries in
config-specific exported files, so skip them early.
Existing single-parameter expressions work due to special casing
which assumes that if there is only one parameter, and the node
accepts arbitrary content, then the result is the input.
This is true for the existing expressions matching that
pattern - namely the "1" and "TARGET_NAME" expressions. However,
the LOWER_CASE, and UPPER_CASE expressions should also accept
arbitrary content, and in their case, the result is not the input.
Refactor the cmGeneratorExpressionEvaluator to allow that extension.
Actually evaluate the "1" and "0" nodes.
Added a new variable CPACK_WIX_PATCH_FILE that users can point at an
XML patch file. Fragments defined within the patch file will be inserted
at supported insertion points (currently Component, File and Directory).
As we're iterating over IMPORTED targets now, handle them in
the loop body. The existing behavior is harmless because generally
nothing is done anyway for IMPORTED targets in these code paths,
because they do not have sources for example.
Commit b04f3b9a (Create make rules for INTERFACE_LIBRARY
targets., 2013-08-21) extended the makefile generator to create
build targets for INTERFACE_LIBRARY targets. No other generators
were extended with this feature.
This conflicts with the feature of whitelisting of target properties
read from INTERFACE_LIBRARY targets. The INTERFACE_* properties
of the INTERFACE_LIBRARY may legitimately contain TARGET_PROPERTY
generator expressions for reading properties from the 'head target'.
The 'head target' would be the INTERFACE_LIBRARY itself when creating
the build rules for it, which means that non-whitelisted properties
would be read.
The INTERFACE_LIBRARY type does not have any LOCATION at all, so
return early from GetMappedConfig. GetMappedConfig is called from
two locations, one of which already pre-checks the INTERFACE_LIBRARY
case. Remove that pre-check and handle that case inside the method
instead.
77f3772 cmTarget: Require a compatible INTERFACE_AUTOUIC_OPTIONS from dependencies.
2e60b5f cmTarget: Report origin of COMPATIBLE_INTERFACE properties.
Revert the origin-tracking infrastructure from commit 98093c45 (QtAutoUic:
Add INTERFACE_AUTOUIC_OPTIONS target property., 2013-11-20). Use the
compatibility-tracking for compatible strings instead.
If two different dependencies require different AUTOUIC_OPTIONS,
cmake will now appropriately issue an error.
259bf09 Make the cmStrictTargetComparison operate on const cmTarget*.
8cc3cdb Help: Fix up the VISIBILITY_INLINES_HIDDEN docs.
1396ab8 Don't generate self-references for system include directories.
Since commit 5f5c92b9 (VS: Add internal APIs to find MSBuild,
devenv/VCExpress, and msdev, 2013-11-13) the VS generators have
known how to lookup the locations of their build tools directly.
Expose this information to CMake language code by defining new
variables to hold the paths to these tools.
Commit 66b290e7 (export(): Process the export() command at generate
time., 2012-10-06 ) refactored export() so that it could evaluate
strings at generate-time. This was intended for evaluating target
properties, but that commit also removed a check for target
existence at configure-time. Restore that check and add a test for
this case.
Targets which link directly to themselves should not result in
generate-time errors (reported by the DAG checker).
Self-links are handled separately with policy CMP0038.
98093c4 QtAutoUic: Add INTERFACE_AUTOUIC_OPTIONS target property.
02542b4 QtAutoUic: Handle new -include command line parameter.
1242f4e Genex: Add {UPPER,LOWER}_CASE and MAKE_C_IDENTIFIER.
754b321 QtAutogen: Use config without prefix in map key.
5838aba Export: Report error on relative include with genex.
7a3e45b Export: Prefix relative items with genexes in INSTALL_INTERFACE.
f088a32 Export: Process INSTALL_INTERFACE in INCLUDES DESTINATION.
9eedc85 Export: Process relative includes after genex evaluation.
80790f3 Export: Test existing behavior of exporting includes with genexes.
38afc82 target_include_directories: Allow relative path with genex
On posix platforms return values are limited to a range from 0 to 255.
Cross compiling/linking with MSVC on linux/wine leads to a
misinterpretation of the return value 1090650113 of mt.exe.
Fix logic introduced by commit eeeeca10 (XCode: Support target folders
on XCode, 2011-02-20) to avoid duplicate subfolders. The problem was
that no slash was appended to the curr_tgt_folder string on the it !=
this->TargetGroup.end() path.
This was missing from commit c34968a9 (Port some of the generator
API to cmGeneratorTarget., 2012-10-10). The generator targets
stored with the cmMakefile include IMPORTED targets, unlike the
accessor for resgular targets. Before this patch, rules would
be generated for Qt5::Core for example, which result in broken
makefiles.
Transitively consume the property from linked dependents.
Implement configuration-specific support by following the pattern
set out for compile definitions and includes in cmQtAutoGenerators.
Implement support for origin-tracking with CMAKE_DEBUG_TARGET_PROPERTIES.
This is motivated by the needs of KDE, which provides a separate
translation system based on gettext instead of the Qt linguist
translation system. The Qt uic tool provides command line options
for configuring the method used to translate text, and to add an
include directive to the generated file to provide the method.
http://thread.gmane.org/gmane.comp.kde.devel.frameworks/7930/focus=7992
Implement the interface to provide the uic options as a usage-requirement
on the KI18n target, as designed for KDE.
Creates a hierarchy of WiX features from CPack components and component groups.
Switch to the FeatureTree UI in case components have been defined.
Handles the component REQUIRE and HIDDEN options
and the component group EXPANDED option.
Diagnostics which check the sanity of exported include paths
previously skipped over any path containing a generator expression.
Introduce a policy to issue an error message in such cases.
The export files created in the OLD behavior are not usable, because
they contain relative paths or paths to the source or build location
which are not suitable for use on installation. CMake will report an
error on import.
Code such as
target_include_directories(foo INTERFACE
$<INSTALL_INTERFACE:include$<FOO>>
)
should be treated as a relative directory, despite the genex, after
the INSTALL_INTERFACE is stripped away.
Previously, this would generate a relative directory on export, which
would be an error on import, so no policy is needed.
Code such as
install(TARGETS ...
INCLUDES DESTINATION $<INSTALL_INTERFACE:include>
)
should behave as if the INSTALL_INTERFACE wrapper were not present.
In code such as
install(TARGETS ...
INCLUDES DESTINATION $<FOO>include
)
the generator expressions are evaluated at generate-time. Delay
determining whether each entry is a relative path until after
the generator expressions are evaluated. Such relative paths
are based relative to the CMAKE_INSTALL_PREFIX.
Treat paths which are relative and which contain a generator
expression which is not at the beginning as relative to the
source directory.
This matches the behavior of paths which are relative but contain
no generator expression at all.
Previously this would generate a relative path with the IMPORTED
target on export(), which would be a reported as a non-existent
path on import. If used directly in the buildsystem, it would be
reported as a relative path, which is also an error. There is no
need for a policy in this case.
Add the "-e" option to build.make invocations of wmake as part of
the silencing flags. From "wmake /?":
-e erase files after error (no prompt)
This prevents test timeouts on error.
As an INTERFACE_LIBRARY has no direct link dependencies, we can
short-circuit in cmGeneratorExpressionEvaluator and
in cmGlobalGenerator::CheckLocalGenerators.
As they do not generate any output directly, any generate- or install-
related code acn also be short-circuited. Many of the local generators
already do this.
Because only INTERFACE related properties make sense on INTERFACE_LIBRARY
targets, avoid setting other properties, for example via defaults.
Brad King
Kitware Robot
Rolf Eike Beer
Nils Gladitz
Robert Maynard
Stephen Kelly
Eran Ifrah
Ruslan Baratov
Clinton Stimpson
Alex Neundorf
David Golub
Flynn Marquardt
Stephan Tolksdorf
Peter Kümmel