Add a cmTarget::CompileInfo struct to hold per-configuration information
about the compilation settings in a target. This is different than
cmTarget::OutputInfo because it applies to any targets that can compile
sources even if they do not link or archive.
Implement a Visitor to hold the sequence of source file tests
for populating outputs. Use VS 6 and 7 workaround from Brad
King for lack of partial template specialization and function
template specialization capabilities.
This will make it possible to use context dependent generator
expressions to determine the sources of a target.
Replace calls to GetLinkInformation with calls to a method to get only
the target closure, not the link languages etc. The replaced calls
are used while evaluating generator expressions only. This makes
transitive generator expression evaluation independent from
the languages of a target. In a follow-up topic, it will be possible
to make the languages depend on generator expression evaluation, via
evaluation of the SOURCES and INTERFACE_SOURCES target properties.
Because the order of entries is not the same as the final link line,
the order of debug output is different in the RunCMake.CompatibleInterface
test, because the BOOL_PROP7 target property is evaluated first. Adjust
the test to account for that new order.
For the OLD CMP0022 behavior, we need to treat the implementation
as the interface when computing the interface libraries. Make it
possible to do that without computing the link languages by adding
a new GetLinkImplementationLibraries method. Extend the existing
GetLinkImplementation method to populate the languages if the
libraries have already been computed and cached.
Change GetTransitivePropertyTargets to invoke GetLinkInterfaceLibraries
instead of GetLinkInterface. This is key, as it is a method called
by cmGeneratorExpressionEvaluator.
Change the cmGeneratorExpressionEvaluator to invoke
GetLinkImplementationLibraries instead of GetLinkImplementation.
When evaluating the SOURCES property, we will need to be able to access
the link libraries without accessing the link languages, as the languages
depend on the SOURCES.
Arrange the logic so that the part which deals with libraries only is
at the top. In a follow-up commit, this will be split into two methods.
Ensure that the explanatory CMP0022 comment is only present in one
location.
The callers already skip non-targets, so unify the target search.
Change supporting functions to accept a container of targets instead
of strings where possible.
In a follow-up, the list of sources will become dependent on
the config, so check for existence in cmTarget::GetSourceFiles
instead of up-front with cmGlobalGenerator::CheckTargets().
6e89c8a5 install: Support generator expressions in FILES and PROGRAMS mode
f11f7b34 cmInstallFilesGenerator: Add reference to calling cmMakefile
e190236c Help: Format install() command documentation
Teach the install(FILES) and install(PROGRAMS) commands to evaluate
generator expressions in the list of files.
Extend the ExportImport test to cover installation cases involving
generator expressions.
Add a Makefile member to the cmInstallFilesGenerator class and
populate it on construction. This will be useful in a following
change to evaluate generator expressions with proper context.
The char-by-char parsing causes lots of reallocations which shouldn't be
necessary. To improve this, fast-path strings without a semicolon,
reserve space in the result, and insert into the result in chunks.
Optimize cmGeneratorExpressionLexer::Tokenize to use a switch statement.
The many dereferences of the input pointer were expensive. Also remove
excess pointer arithmetic.
Historically CMake used three version components for the feature level.
We released new features while incrementing only the third version
component. Since commit v2.8.2~105^2~4 (New version scheme to support
branchy workflow, 2010-04-23) we used the fourth version component for
bug-fix releases and the development date:
<major>.<minor>.<patch>[.<tweak>][-rc<n>] = Release
<major>.<minor>.<patch>.<date>[-<id>] = Development
This solidified use of three components for the feature level, and was
necessary to continue releasing 2.x versions because:
* Some existing projects performed floating-point comparisons of
${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION} to 2.x numbers
so ``x`` could never be higher than 9.
* Version 2.9.<date> was used briefly in post-2.8.0 development in
CVS prior to the transition to Git, so using it in releases may
have caused confusion.
Now that we are moving to 3.x versions, these two restrictions go away.
Therefore we now change to use only two components for the feature
level and use the scheme:
<major>.<minor>.<patch>[-rc<n>] = Release
<major>.<minor>.<date>[-<id>] = Development
The cmGeneratorExpression is used here, but the header for it is not
in the include heirarchy. This would be a compile error if the file
were compiled as a standalone translation unit, but it is instead
used in a mini-unity-build by inclusion in cmCommands.cxx. The header
for cmGeneratorExpression happens to be included first, so the
compilation works fine.
IDEs do not know this however, and flag the use as an error.
Several CMake operations need to replace files in rapid succession.
This commonly fails on Windows due to filesystem lock behavior so
we have retry loops. No matter how many times we retry or how long
we delay there will inevitably be someone with an environment that
needs more. Make the retry count and delay configurable in the
Windows Registry keys:
{HKCU,HKLM}/Software/Kitware/CMake/Config
in DWORD values
FilesystemRetryCount = Number of tries
FilesystemRetryDelay = Delay in milliseconds between tries
Leave the feature undocumented for now to see how it goes.
9bcc1b21 Export: Fix internal CMake version test logic
d2059d25 cmVersion: Fix CMake_VERSION_ENCODE for date in patch level
28805109 cmStandardIncludes: Include cmIML/INT.h for portable integer types
Fix the internal DEVEL_CMAKE_VERSION macro to use CMake_VERSION_ENCODE
to compare version component-wise. Otherwise an old invocation of the
macro may be tricked into using the current version when the requested
major version is smaller than the current version but the requested
minor version is larger. It should use the requested (old) version in
that case.
Use a uint64_t to store encoded version numbers so we have plenty of
bits available. Encode with room for up to 1000 minor releases between
major releases and to encode dates until the year 10000 in the patch
level. This is necessary because CMake development versions prior to
release 2.8.0 used the date in the patch level, and this practice may be
restored after the 3.0 release.
In CMakeGraphVizOptions.cmake, allow the options GRAPHVIZ_GENERATE_PER_TARGET
and GRAPHVIZ_GENERATE_DEPENDERS to enable the generation of per target graphs
and subgraphs respectively. Both options are TRUE per default to maintain
current behavior.
This is a hot-fix for the bug. It seems like a good idea to generally
reform the generator to care about targets instead of directories,
but this patch at least makes the reported error go away.
Define the list of commands in the CMakeLists.txt file. List the
sources in the CMakeLib target, but mark them as HEADER_FILE_ONLY.
This has the effect that IDEs will show the files, though they
will not be built again.
Add a cmCommandsForBootstrap.cxx file for bootstrapping purposes.
Rename the cmExportLibraryDependencies file to match the common
pattern.
The qtx_add_resources() macro adds the resource file to the output list
to maintain file-level dependencies. Having the qrc file in a target
sources is a precondition for AUTORCC to function.
When processing the source files of a target, only add the generated
qrc_<file>.cpp to the target sources if AUTORCC is ON. This avoids
pre-porting conflict with the macro.
Reported-by: Micha Hergarden
Since commit v2.8.2~105^2~2 (Teach CMake Policies about tweak version
component, 2010-04-23), cmPolicies has known how to handle a policy
introduced in a tweak version. This was done back when we introduced
policies with the current development date version and later updated it
to the release version. Now we always introduce policies using the next
expected release version and explicitly set the policy to test the NEW
behavior.
CMake Policies (or any other features) should never be introduced in a
tweak (bugfix) release, so drop the infrastructure that allows this.
Set a global property in the find_package implementation. Track and
reset that property in the find_dependency macro. Read the property
in FeatureSummary when determining whether to print output.
This means that packages which are found only as dependencies are not
listed by FeatureSummary, but if a project uses find_package elsewhere
directly, then it will be listed by FeatureSummary.
Suggested-by: Alex Merry
http://thread.gmane.org/gmane.comp.kde.devel.frameworks/10640
41d2f2c4 write_basic_package_version_file: use PROJECT_VERSION
7e142c5a project: Manage VERSION variables
16d040c9 project: Add optional LANGUAGES keyword
00007dcc Help: Format project command and variable documentation
When using link_directories() and including CMAKE_CFG_INTDIR,
one can end up with duplicate RPATHs in the binary which
install_name_tool cannot fix without corrupting the binary.
Also, the cmake_install.cmake file has been fixed to correctly
handle these generator specific variables.
It accepts a before parameter but is never called with before=true.
compile definitions are sorted by std::set, so it wouldn't make sense
to allow user sorting.
f7ae1d8a QtAutogen: Short-circut some logic when moc is not available.
4b989d5f QtAutogen: Separate source file processing from AUTOMOC.
c48d877d QtAutogen: Make some methods appropriately file-static.
394e86df QtAutogen: Fix autouic target options in the presence of a config.
964d7f2a QtAutogen: Remove unused variables.
0d934efd QtAutogen: Remove read of SKIP_AUTOUIC target property.
321e348e QtAutogen: Use Qt 4 IMPORTED targets to find executable locations.
e96683b0 Qt4: Use IMPORTED executable names with custom commands.
e6182f5d Qt4: Create IMPORTED executable targets for all Qt executables.
Teach the project() command to set variables
{PROJECT,<PROJECT-NAME>}_VERSION{,_MAJOR,_MINOR,_PATCH,_TWEAK}
holding the project version number and its components. Add project()
command option "VERSION" to specify the version explicitly, and default
to the empty string when it is not given.
Since this clears variables when no VERSION is given, this may change
behavior for existing projects that set the version variables themselves
prior to calling project(). Add policy CMP0048 for compatibility.
Suggested-by: Alex Neundorf <neundorf@kde.org>
Teach the project() command to recognize an optional "LANGUAGES"
keyword after the project name and prior to the list of languages.
Do not allow multiple copies of the keyword. If the keyword is
specified and no languages are listed, imply NONE.
Avoid using the moc from Qt 5 with Qt 4 based targets. Moc generates
a version check to ensure that such generated code does not compile.
The Qt4And5Automoc unit test should have been testing this, but it
was not because the test was broken. In that unit test, moc was run
on trivial files which have no significant content, and in particular
no Q_OBJECT macro. Therefore moc was generating empty files which
do not even contain the version check. Fix this by generating files
for input to moc at cmake time.
bde0dab1 cmMakefile: Make ConfigureString const.
bf1e1bf1 cmMakefile: Make FindSourceGroup const.
01d7ceda cmMakefile: Trivially constify some methods.
9073318f cmMakefile: Remove non-const version of method
9b05bc4f cmMakefile: Remove method declarations with no implementation.
c6c0bd9d cmMakefile: Consify custom command API.
d6d4eaac cmMakefile: Constify policies accessors.
2a6e56e0 cmCacheManager: Consify version accessors.
5cc9fb02 cmSourceGroup: Fix method name capitalization.
fe8b0330 cmMakefile: Constify some cmSourceGroup related code.
e68a3ead cmSourceFile: Use a const cmMakefile.
b6292402 cmSourceFileLocation: Use a const cmMakefile.
b33ea578 cmMakefile: Make GetProperty const.
a432b93b file DOWNLOAD: Display the curl result status when a hash mismatch occurs.
1cb9ef81 file DOWNLOAD: Test non-zero return status.
f73f0fb3 file DOWNLOAD: Add test for bad hash.
b5e2265f ExternalProject: Reattempt download when verification fails.
Introduce policy CMP0047 to control resetting the id for
compatibility.
De-duplicate content in the QNX platform file by including the GNU
one. QNX is a form of GNU platform.
Do not clear CMAKE_SHARED_LIBRARY_${lang}_FLAGS variables. They
are populated again later by the Compiler/GNU.cmake file anyway.
Modify the CMAKE_CXX_COMPILE_OBJECT variable only when the QCC
compiler id is in use, and the language is CXX. Use the QNX
recommended flag for QCC instead of the gcc compatible -x flag.
Populate new module files to handle system includes and depfiles
when using the QCC compiler.
Remove code which unsets the system include and depfiles related
variables. When a GNU driver is used instead of the QCC one, the
appropriate flags will be used. These variables were previously
cleared for lowest-common-denominator compatibility with both
drivers.
Mark unknown revisions as such and fail instead of reporting revision 0.
Otherwise CTest reports massive file updates between revisions when the
server timeouts while trying to fetch the current revision number.
Define a new 'CMAKE_CONFIGURE_DEPENDS' directory property that projects
can use to specify input files to the CMake configuration process.
Extend the RunCMake.Configure test to verify that the build system
re-runs CMake when this input changes.
The logic added by commit ffc0b5e4 (Overwrite the symlink if it already
exists, 2007-02-15) does not recognize and remove existing broken links
before replacing them. Improve the logic to remove any existing
destination file or link (but not directory). On failure, report an
error message explaining why the existing path could not be removed or
the new one could not be created.
Add a RunCMake.CommandLine test to cover 'cmake -E' cases. Start with
test cases covering 'cmake -E create_symlink' behavior on UNIX platforms.
...otherwise the generator failed in embedded projects via
externalproject(), since there CMAKE_KATE_MAKE_ARGUMENT is not set.
Using GetSafeDefinition() is good enough to protect against
NULL-pointers.
Alex
Images and xib files must have 'lastKnownFileType' attribute to be
displayed correctly. If xib file has attribute 'explicitFileType' it is
displayed as raw xml. If static image has attribute 'explicitFileType'
it is displayed as question mark on storyboard.
Most callers already have a std::string, on which they called c_str() to pass it
into these methods, which internally converted it back to std::string. Pass a
std::string directly to these methods now, avoiding all these conversions.
Those methods that only pass in a const char* will get the conversion to
std::string now only once.
Store variable types together with their names in the variable completion
list so that the type is automatically recovered when you select a variable.
Keep variable names and types in separate lists. This removes the :TYPE
string from completion list and the Name field and makes variable search
easier. The variable names and types are now kept in two different
settings - AddVariableNames and AddVariableTypes. Drop the old
AddVariableCompletionEntries setting.
Revert commit 4a6397a7 (Ninja: Track configured files so we can
regenerate them, 2013-06-17). The files reported by the method
cmMakefile::GetOutputFiles() must cause CMake to re-run only if they are
missing and without considering a timestamp. This is not the meaning of
the implicit dependencies field so Ninja re-runs CMake too often.
Another solution will have to be found to the original problem.
Revert commit 6fac24d7 (Ninja: Avoid re-running CMake on next build
after regeneration, 2014-01-09). The files reported by the method
cmMakefile::GetOutputFiles() must cause CMake to re-run only if they are
missing and without considering a timestamp. Therefore they cannot be
listed as outputs of the re-run rule or Ninja will re-run CMake every
time because the timestamp of configure_file outputs does not change.
Another solution will have to be found to the original problem.
2cbf0311 cmGlobalGenerator: Make SelectMakeProgram const.
b4ff38a5 cmGlobalGenerator: Make CheckALLOW_DUPLICATE_CUSTOM_TARGETS const
8aeddf1f cmGlobalGenerator: Make some API const.
8fd0f2a7 cmGeneratorTarget: Hold a const global generator.
46315320 cmComputeLinkDepends: Hold a const global generator.
In commit 4a6397a7 (Ninja: Track configured files so we can regenerate
them, 2013-06-17) we accidentally started listing files generated by
CMake as inputs to the configuration process instead of outputs from it.
Move the list of files generated by CMake to the regeneration rule
outputs section and tell Ninja to restat after running it.
Create cmGeneratorTargets before generating generate-time information.
C++ interfaces for querying build information is increasingly only
available at generate time through the cmGeneratorTarget class. Ensure
that the required cmGeneratorTarget instances are created. Use the
cmGlobalGenerator access API to access the relevant cmGeneratorTarget
instead of creating a temporary one on the stack.
73e9340 get_target_property: Error on non-existent target.
ab9f58f FindQt4: Ensure target exists before calling get_target_property.
37ebeb9 FindQt4: Fix use of get_target_property to use actual target name.
6aabb6a Genex: Use case-sensitive comparison for COMPILER_ID.
5bb53f6 cmTarget: Deprecate COMPILE_DEFINITIONS_ properties with a policy.
The implementation of the "cmake --help-custom-modules" was removed
along with the rest of the old help generation infrastructure when
documentation was converted to reStructuredText. In order to avoid
breaking existing project builds outright when they use a custom command
that runs a command like "cmake --help-custom-modules foo.1", generate
the requested file with placeholder content explaining that the option
is not supported anymore.
In VS <= 9 we already convert include paths to use backslashes
but the conversion was left out of the VS >= 10 generator.
Add the conversion now for consistency. VS 11 and 12 now require
it because they mistakenly interpret forward-slash options that
happen to occur in paths:
http://connect.microsoft.com/VisualStudio/feedback/details/778367
Since commit 56831461 (Xcode: Use explicitFileType to mark source types,
2013-04-16) the Xcode generator prefers to use explicitFileType to tell
Xcode about each source file type. This works better than
lastKnownFileType for some file types, but not for "file.storyboard".
If storyboard file has attribute 'explicitFileType' it is displayed
incorrectly (as raw xml). Switch it back to 'lastKnownFileType'.
Since commit 56831461 (Xcode: Use explicitFileType to mark source types,
2013-04-16) the Xcode generator prefers to use explicitFileType to tell
Xcode about each source file type. This works better than
lastKnownFileType for some file types, but not for "file.storyboard".
If storyboard file has attribute 'explicitFileType' it is displayed
incorrectly (as raw xml). Switch it back to 'lastKnownFileType'.
3917d86 Genex: Add a nullary form for CONFIG
5169130 Help: Document the target properties exported to IMPORTED targets.
ee21f1c CompatibleInterface: Test debugging of not-set property.
80e9fe9 Help: Note that language-specific 'built-ins' are set by the project command.
0b5bf8a Help: Mention CMAKE_DISABLE_FIND_PACKAGE_<PackageName> in package docs.
28c865b Tests: simplify Qt4 target usage
6cfe6b8 Help: Fix typo: 'target' -> 'target property'
b7deca4 Test: Remove obsolete commented code.
9c9f69f Genex: Make EQUAL support upper case binary literals
6eb3218 Genex: Fix case of methods in the dag checker.
646c6ec Genex: Use a preprocessor loop to implement transitive DAG check.
711fb38 Genex: List transitive properties and methods as a table, not two lists.
802a28f Add cmHasLiteralSuffix API.
This is consistent with other similar expressions such as PLATFORM_ID,
and makes the CONFIGURATION expression obsolete.
Fix an off-by-one error in
GeneratorExpressionContent::EvaluateParameters exposed by a unit test.
Remove the test for 'bad' nullary use of $<CONFIG>.
Add a unit test to verify that $<CONFIG> and $<CONFIGURATION> have
the same value.
The other infrastructure for transitive property handling is
already using a preprocessor loop.
Implement special backward-compatibility handling of
COMPILE_DEFINITIONS_<CONFIG> using a template switch for the
extra check.
As a new feature it does not need to participate in CMP0024.
Store cmExportBuildFileGenerator instances which correspond to the
export(EXPORT) signature in a second map which does not own the
pointers. This avoids the need to add cmExportBuildFileGenerator
and dependencies to the bootstrap system.
Direct users of IMPORTED targets treat INTERFACE_INCLUDE_DIRECTORIES
as SYSTEM, after commit a63fcbcb (Always consider includes from IMPORTED
targets to be SYSTEM., 2013-08-29). It was intended that transitive
use of an IMPORTED target would have the same behavior, but that
did not work. The implementation processed only direct dependencies
in cmTarget::FinalizeSystemIncludeDirectories.
Implement transitive evaluation of dependencies by traversing the
link interface of each target in the link implementation.
The error messages were incorrect (reporting that the expression
requires one or two parameters), and repeated. Remove the now-unused
ZeroOrMoreParameters enum value.
There is no need to allow EXCLUDE_* properties, because an
INTERFACE_LIBRARY has no direct build output.
IMPORTED_LINK_INTERFACE_LANGUAGES are relevant only to static
libraries.
VERSION is relevant only to the filename of direct build outputs,
which INTERFACE_LIBRARY does not have.
If the dependent target sets the property to boolean false, ensure
that that appears in the debug report. Previously, the report
output contained whether the property was consistent among dependencies,
displaying 'TRUE', instead of the content of the property, which may
be 'FALSE'.
Return a std::pair from the consistentProperty method. This makes
it possible to make the return value for string types easier to
reason about. The return value of consistentProperty was previously
set to an empty static string to emulate a 'true' value for the caller
in commit 816b4a8a (cmTarget: Make consistentProperty
return consistent content., 2013-10-22). The pair makes the
consistency result properly typed.
Don't refer to 'both', but a 'mixture'. List all compatible interface
property types possible.
Add another test for a mixture of three compatibilities.
The include_directories() and add_compile_options() commands
should not append to the corresponding target property for IMPORTED
targets. This is already the case for add_definitions().
The modern way to create configuration dependent content is using
generator expressions in the main export file. The only non-deprecated
property still generated in the configuration-specific files are
IMPORTED_LOCATION_<CONFIG>
INTERFACE_LIBRARY targets have no location, and no need for those
files.
The next version is 3.0.0, not 2.8.13.
The version generated in the export file should be updated in
the release branch in both cmExportInstallFileGenerator and
cmExportBuildFileGenerator.
37104d9 kate: put full path to cmake into comment
424d5dc kate: support also the build plugin in kate <= 4.12
8bd6cf0 kate: the prev_target is not used by kate
The <OBJECT_DIR> placeholder is supposed to be the base intermediate
files directory for the current target. This is how it gets replaced
during link line generation. However, during compile line generation
we replace it with the directory containing the current object file
which may be a subdirectory. Fix replacement of <OBJECT_DIR> in the
generated compile lines to be the base intermediate files directory.
This was expoxed by commit 42ba1b08 (VS: Separate compiler and linker
PDB files, 2013-04-05) when we added a "/Fd<OBJECT_DIR>/" flag to the
MSVC compile line in order to match the VS IDE default compiler program
database location in the intermediate files directory. For source files
in a subdirectory relative to the current target this caused the wrong
location to be used for the compiler program database. This becomes
particularly important when using precompiled headers.
While at it, use the cmTarget::GetSupportDirectory method to compute the
intermediate files directory for the current target instead of repeating
the logic in a few places.
With this patch, cmake now puts the MachO64 bit
binary file parser into the config file if the detected
Eclipse is at least Helios (7.0), otherwise with the old
parser executables will not be recognized by Eclipse.
Alex
With this patch, simply also the information used
by the build plugin in kate <= 4.12 is put into the
generated json file. The new build plugin (coming
in 4.13) simply ignores this (and vice versa).
Alex
Teach the export command to handle export sets defined by invocations
of install(TARGETS ... EXPORT foo). This makes maintenance of targets
exported to both the build tree and install tree trivial.
The first regression resulted in endless looping due to unrun test
dependencies. The second regression prioritized all tests with dependencies
in serial test runs.
Populate a separate vector of files and append them separately. This
was the pattern used prior to commit 035b6908 (Autogen: Split AutoRcc
handling into two methods, 2013-12-10), which was erroneously not
maintained in that refactoring.
The parent commit changed the AutogensType::value_type to be
"std::pair<cmQtAutoGenerators,cmTarget const*>" but our std::make_pair
call returns "std::pair<cmQtAutoGenerators,cmTarget*>". Construct the
value_type directly instead of using make_pair. Otherwise the Sun 5.9
compiler complains
".../Source/cmGlobalGenerator.cxx", line 1281: Error:
Formal argument x of type "const std::pair<cmQtAutoGenerators, const cmTarget*>&"
in call to "std::vector<std::pair<cmQtAutoGenerators, const cmTarget*> >
::push_back(const std::pair<cmQtAutoGenerators, const cmTarget*>&)" is being
passed "std::pair<cmQtAutoGenerators, cmTarget*>".
Add the .NOTPARALLEL target to each local Makefile command-line
interface entry point file so that even with -j we launch only
one "make -f Makefile2" at a time. The actual build rules
in Makefile2 and lower will still run in parallel.
Do not add .NOTPARALLEL for Borland or Watcom make tools because
they do not tolerate it. Other make tools that do not understand
.NOTPARALLEL will not be hurt.
Suggested-by: Robert Luberda <robert-cmake@debian.org>
The properties object has just been created, so is always empty,
which means the if block is never entered. The following lines do
not have any effect because an INTERFACE library has no LOCATION.
At the end, no code is generated for INTERFACE libraries in
config-specific exported files, so skip them early.
Existing single-parameter expressions work due to special casing
which assumes that if there is only one parameter, and the node
accepts arbitrary content, then the result is the input.
This is true for the existing expressions matching that
pattern - namely the "1" and "TARGET_NAME" expressions. However,
the LOWER_CASE, and UPPER_CASE expressions should also accept
arbitrary content, and in their case, the result is not the input.
Refactor the cmGeneratorExpressionEvaluator to allow that extension.
Actually evaluate the "1" and "0" nodes.
Added a new variable CPACK_WIX_PATCH_FILE that users can point at an
XML patch file. Fragments defined within the patch file will be inserted
at supported insertion points (currently Component, File and Directory).
As we're iterating over IMPORTED targets now, handle them in
the loop body. The existing behavior is harmless because generally
nothing is done anyway for IMPORTED targets in these code paths,
because they do not have sources for example.
Commit b04f3b9a (Create make rules for INTERFACE_LIBRARY
targets., 2013-08-21) extended the makefile generator to create
build targets for INTERFACE_LIBRARY targets. No other generators
were extended with this feature.
This conflicts with the feature of whitelisting of target properties
read from INTERFACE_LIBRARY targets. The INTERFACE_* properties
of the INTERFACE_LIBRARY may legitimately contain TARGET_PROPERTY
generator expressions for reading properties from the 'head target'.
The 'head target' would be the INTERFACE_LIBRARY itself when creating
the build rules for it, which means that non-whitelisted properties
would be read.
The INTERFACE_LIBRARY type does not have any LOCATION at all, so
return early from GetMappedConfig. GetMappedConfig is called from
two locations, one of which already pre-checks the INTERFACE_LIBRARY
case. Remove that pre-check and handle that case inside the method
instead.
77f3772 cmTarget: Require a compatible INTERFACE_AUTOUIC_OPTIONS from dependencies.
2e60b5f cmTarget: Report origin of COMPATIBLE_INTERFACE properties.
Revert the origin-tracking infrastructure from commit 98093c45 (QtAutoUic:
Add INTERFACE_AUTOUIC_OPTIONS target property., 2013-11-20). Use the
compatibility-tracking for compatible strings instead.
If two different dependencies require different AUTOUIC_OPTIONS,
cmake will now appropriately issue an error.
259bf09 Make the cmStrictTargetComparison operate on const cmTarget*.
8cc3cdb Help: Fix up the VISIBILITY_INLINES_HIDDEN docs.
1396ab8 Don't generate self-references for system include directories.
Since commit 5f5c92b9 (VS: Add internal APIs to find MSBuild,
devenv/VCExpress, and msdev, 2013-11-13) the VS generators have
known how to lookup the locations of their build tools directly.
Expose this information to CMake language code by defining new
variables to hold the paths to these tools.
Commit 66b290e7 (export(): Process the export() command at generate
time., 2012-10-06 ) refactored export() so that it could evaluate
strings at generate-time. This was intended for evaluating target
properties, but that commit also removed a check for target
existence at configure-time. Restore that check and add a test for
this case.
Targets which link directly to themselves should not result in
generate-time errors (reported by the DAG checker).
Self-links are handled separately with policy CMP0038.
98093c4 QtAutoUic: Add INTERFACE_AUTOUIC_OPTIONS target property.
02542b4 QtAutoUic: Handle new -include command line parameter.
1242f4e Genex: Add {UPPER,LOWER}_CASE and MAKE_C_IDENTIFIER.
754b321 QtAutogen: Use config without prefix in map key.
5838aba Export: Report error on relative include with genex.
7a3e45b Export: Prefix relative items with genexes in INSTALL_INTERFACE.
f088a32 Export: Process INSTALL_INTERFACE in INCLUDES DESTINATION.
9eedc85 Export: Process relative includes after genex evaluation.
80790f3 Export: Test existing behavior of exporting includes with genexes.
38afc82 target_include_directories: Allow relative path with genex
On posix platforms return values are limited to a range from 0 to 255.
Cross compiling/linking with MSVC on linux/wine leads to a
misinterpretation of the return value 1090650113 of mt.exe.
Fix logic introduced by commit eeeeca10 (XCode: Support target folders
on XCode, 2011-02-20) to avoid duplicate subfolders. The problem was
that no slash was appended to the curr_tgt_folder string on the it !=
this->TargetGroup.end() path.
This was missing from commit c34968a9 (Port some of the generator
API to cmGeneratorTarget., 2012-10-10). The generator targets
stored with the cmMakefile include IMPORTED targets, unlike the
accessor for resgular targets. Before this patch, rules would
be generated for Qt5::Core for example, which result in broken
makefiles.
Transitively consume the property from linked dependents.
Implement configuration-specific support by following the pattern
set out for compile definitions and includes in cmQtAutoGenerators.
Implement support for origin-tracking with CMAKE_DEBUG_TARGET_PROPERTIES.
This is motivated by the needs of KDE, which provides a separate
translation system based on gettext instead of the Qt linguist
translation system. The Qt uic tool provides command line options
for configuring the method used to translate text, and to add an
include directive to the generated file to provide the method.
http://thread.gmane.org/gmane.comp.kde.devel.frameworks/7930/focus=7992
Implement the interface to provide the uic options as a usage-requirement
on the KI18n target, as designed for KDE.
Creates a hierarchy of WiX features from CPack components and component groups.
Switch to the FeatureTree UI in case components have been defined.
Handles the component REQUIRE and HIDDEN options
and the component group EXPANDED option.
Diagnostics which check the sanity of exported include paths
previously skipped over any path containing a generator expression.
Introduce a policy to issue an error message in such cases.
The export files created in the OLD behavior are not usable, because
they contain relative paths or paths to the source or build location
which are not suitable for use on installation. CMake will report an
error on import.
Code such as
target_include_directories(foo INTERFACE
$<INSTALL_INTERFACE:include$<FOO>>
)
should be treated as a relative directory, despite the genex, after
the INSTALL_INTERFACE is stripped away.
Previously, this would generate a relative directory on export, which
would be an error on import, so no policy is needed.
Code such as
install(TARGETS ...
INCLUDES DESTINATION $<INSTALL_INTERFACE:include>
)
should behave as if the INSTALL_INTERFACE wrapper were not present.
In code such as
install(TARGETS ...
INCLUDES DESTINATION $<FOO>include
)
the generator expressions are evaluated at generate-time. Delay
determining whether each entry is a relative path until after
the generator expressions are evaluated. Such relative paths
are based relative to the CMAKE_INSTALL_PREFIX.
Treat paths which are relative and which contain a generator
expression which is not at the beginning as relative to the
source directory.
This matches the behavior of paths which are relative but contain
no generator expression at all.
Previously this would generate a relative path with the IMPORTED
target on export(), which would be a reported as a non-existent
path on import. If used directly in the buildsystem, it would be
reported as a relative path, which is also an error. There is no
need for a policy in this case.
Add the "-e" option to build.make invocations of wmake as part of
the silencing flags. From "wmake /?":
-e erase files after error (no prompt)
This prevents test timeouts on error.
As an INTERFACE_LIBRARY has no direct link dependencies, we can
short-circuit in cmGeneratorExpressionEvaluator and
in cmGlobalGenerator::CheckLocalGenerators.
As they do not generate any output directly, any generate- or install-
related code acn also be short-circuited. Many of the local generators
already do this.
Because only INTERFACE related properties make sense on INTERFACE_LIBRARY
targets, avoid setting other properties, for example via defaults.
Just enough to reach the BuildMacContentDirectory method and the
NeedRelinkBeforeInstall methods.
In the future, those methods can be moved to cmGeneratorTarget.
Define a custom ordering functor to deterministically and strictly
order the cmTarget* key. Otherwise the order would be dependent on
runtime pointer values, which breaks assumptions of some generators.
The functor orders first by target name, and then by directory. Multiple
global targets may have the same name, such as edit_cache, but their
directory differentiates them.
This allows avoiding error-prone hard-coding of literal
string lengths.
Borland is not able to process the template version of this
method. Make it use the macro version instead. This means
that Borland will also use the macro versions of cmArray*.
Download http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt and place
it as Licenses/LGPLv2.1.txt in our source tree. When building cmake-gui,
use option CMake_GUI_DISTRIBUTE_WITH_Qt_LGPL to enable notification
in the "About" dialog of how the distribution of Qt is licensed.
Install the license file as ${CMAKE_ROOT}/Licenses/LGPLv2.1.txt so that
the dialog can display a path to it.
This variable can be useful in cross-compiling contexts where the
sysroot is read-only or where the sysroot should otherwise remain
pristine.
If the new CMAKE_STAGING_PREFIX variable is set, it is used instead
of CMAKE_INSTALL_PREFIX when generating the installation rules in
cmake_install.cmake.
This way, the CMAKE_INSTALL_PREFIX variable
always refers to the installation prefix on the target device, regardless
of whether host==target.
If any -rpath paths passed to the linker contain the CMAKE_STAGING_PREFIX,
the matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.
Matching paths in the -rpath-link are not transformed.
The cross-prefix usr-move workaround is assumed not to require extension
regarding CMAKE_STAGING_PREFIX. The staging area is a single prefix, so
there is no scope for cross-prefix symlinks. The CMAKE_INSTALL_PREFIX
is still used to determine the workaround path, and that variable
remains the relevant one even if CMAKE_STAGING_PREFIX is used. If the
generated export files are deployed to the target, the workaround
will still be in place, and still be employed if required.
15eeace cmTarget: Trivially make more API const.
be9dfb6 cmTarget: Make GetExportMacro const.
0794c13 cmTarget: Make NameResolvesToFramework const.
1c27521 cmGlobalGenerator: Make NameResolvesToFramework const.
37554ac cmMakefile: Make FindTarget const.
8841d73 cmMakefile: Make IsAlias const.
36e31cd cmTarget: Make GetInterfaceLinkLibraries const.
04d398d cmTarget: Make GetTargetSourceFileFlags const.
50d1520 cmTarget: Make custom command accessors API const.
0f87643 cmGeneratorTarget: Make GetIncludeDirectories const.
a990722 eclipse: Support custom natures via a global property
51726cc eclipse: Add natures for Eclipse based on enabled languages
4a352d4 Notify extra generators about languages
7cd65c9 Add CMAKE_SYSROOT variable to set --sysroot when cross compiling.
5096967 Allow toolchain files to specify an external toolchain.
76552d5 Add compiler target compile options.
f41ecd1 CMakeDetermineCompilerId: Look for internal file only on host
As CMAKE_ROOT_FIND_PATH can be a list, a new CMAKE_SYSROOT is
introduced, which is never a list.
The contents of this variable is passed to supporting compilers
as --sysroot. It is also accounted for when processing implicit
link directories reported by the compiler, and when generating
RPATH information.
Clang can compile code, but uses the gcc tools for other tasks such
as linking. The -gcc-toolchain option can be used for that, but
generalize so that other compilers can be treated the same.
If such a location is specified, use it as a hint for finding
the binutils executables.
For clang, this allows passing -target <triple> to the compiler, and
for qcc, -V<arch> using toolchain files containing something like
set(triple arm-linux-gnueabihf)
set(CMAKE_C_COMPILER "/usr/bin/clang")
set(CMAKE_C_COMPILER_TARGET ${triple})
set(CMAKE_CXX_COMPILER "/usr/bin/clang++")
set(CMAKE_CXX_COMPILER_TARGET ${triple})
or
set(arch gcc_ntoarmv7le)
set(CMAKE_C_COMPILER /opt/qnx650/host/linux/x86/usr/bin/qcc)
set(CMAKE_C_COMPILER_TARGET ${arch})
set(CMAKE_CXX_COMPILER /opt/qnx650/host/linux/x86/usr/bin/QCC)
set(CMAKE_CXX_COMPILER_TARGET ${arch})
Both clang and qcc are inherently cross compiler( driver)s.
When cross-compiling with clang, use the CMAKE_${lang}_COMPILER_TARGET
as the _CMAKE_TOOLCHAIN_PREFIX to find the appropriate binutils.
When cross-compiling with QNX qcc, use the CMAKE_${lang}_COMPILER_TARGET
to set the appropriate _CMAKE_TOOLCHAIN_PREFIX.
Some generators can use the any enabled languages to add extra support
in the relevant build tool. One such is Eclipse since there are many
plugins available for various languages.
After warning that a help output format is no longer supported, fix the
return value from cmDocumentation::CheckOptions to indicate that it was
still a help option that was parsed. Otherwise CMake moves on to treat
the help output file name as a source tree and complains that it does
not exist.
4cce44b Help: Document the CMAKE_MAKE_PROGRAM variable in more detail
558c74d VS: Switch to internal CMAKE_MAKE_PROGRAM lookup by generators
5229f2d Tests: Do not use an explicit make program for VS generators
72dd738 Tests: Fix MFC test heuristic for empty CMAKE_TEST_MAKEPROGRAM
fd6076d Tests: Pass CMAKE_MAKE_PROGRAM instead of --build-makeprogram
68031ab Tests: Configure SubProject-Stage2 test more robustly
003d10c Tests: Simplify VSExcludeFromDefaultBuild configuration
e47d934 Tests: Simplify VSProjectInSubdir configuration
e965cb1 Tests: Simplify CTest.BuildCommand.ProjectInSubdir configuration
72bf255 Tests: Pass --build-options to every test
4d1d772 ctest: Teach --build-options to allow zero options
96966b5 ctest: Make the --build-makeprogram optional for --build-and-test
91a0211 Simplify some calls to cmGlobalGenerator::Build
123a060 Teach GenerateBuildCommand to find its own make program
5f5c92b VS: Add internal APIs to find MSBuild, devenv/VCExpress, and msdev
4ac75fd Prefer CMAKE_MAKE_PROGRAM over CMAKE_BUILD_TOOL (#14548)
...
Teach add_custom_target to check the policy too. Extend the policy to
disallow reserved target names that we use for builtin targets like
"all".
Extend the RunCMake.CMP0037 test to cover these cases.
Fix CMAKE_<LANG>_CREATE_SHARED_LIBRARY_FORBIDDEN_FLAGS implementation to
only remove whole flags. Without this n the Mac we were incorrectly
removing -w from -Wno-write-strings.
Since commit 42ba1b08 (VS: Separate compiler and linker PDB files,
2013-04-05) the VS generators no longer add ProgramDataBaseFileName.
Therefore we should allow projects to do so by mapping the /Fd option.
For VS >= 10 our flag tables map /Fd to ProgramDataBaseFileName already.
Add the mapping for VS 7, 8, and 9.
Drop the "Modules/CMakeVS*FindMake.cmake" files. Override the
cmGlobalGenerator::FindMakeProgram method for VS generators to use their
internal APIs to locate the build tool. Set the CMAKE_MAKE_PROGRAM as a
normal variable for use by project code, but do not cache it. This will
allow CMake and CTest to select the proper tool at build time.
The --build-options option consumes all following arguments until either
--build-target or --test-command. Fix the logic to allow this to be
zero options.
GenerateBuildCommand now knows how to lookup CMAKE_MAKE_PROGRAM or
choose a generator-provided default build tool. Therefore the
--build-makeprogram can now be optional and simply override the
default selection when provided.
Note that with --build-nocmake we now need to load the cache in order to
make the CMAKE_MAKE_PROGRAM entry available to GenerateBuildCommand.
Code paths that look up CMAKE_MAKE_PROGRAM from the cache only to
pass it to Build, which only passes it to GenerateBuildCommand,
no longer need to do so. GenerateBuildCommand now knows how to
look up CMAKE_MAKE_PROGRAM in the cache when no explicit value
is given, so simply pass 0 now.
Add a cmGlobalGenerator::SelectMakeProgram method to select a
caller-provided make program, the CMAKE_MAKE_PROGRAM cache entry, or a
generator-provided default. Call it from all implementations of the
GenerateBuildCommand method with the corresponding generator's default,
if any.
Historically these were both added for the Makefile and Visual Studio
generators, respectively. Later the VS generators started using the
CMAKE_MAKE_PROGRAM cache entry to find the IDE build tool, and the
CMAKE_BUILD_TOOL was simply set as an alias.
Fix the documentation to explain that CMAKE_MAKE_PROGRAM is the modern
variable and that CMAKE_BUILD_TOOL is the compatibility alias, not the
other way around. Replace uses of CMAKE_BUILD_TOOL with
CMAKE_MAKE_PROGRAM in CMake-provided modules. Nothing needs to lookup
CMAKE_BUILD_TOOL in the cache, so simply set it as a normal variable.
All cmGlobalGenerator::GenerateBuildCommand call sites that need to
produce a string now generate "cmake --build" commands. The remaining
call sites immediately pass the result to cmSystemTools::RunSingleCommand.
Avoid the intermediate string and argument parsing by directly producing a
vector of strings. Also drop the ignoreErrors argument because no call
sites remain that use it.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It also makes the ctest_build command match what
"ctest -T Build" would run in a build tree configured with the new
build_command() command behavior. It also ensures that the native build
tool used matches that selected by the configuration of the tree to be
built.
Re-implement the build_command() command to use "cmake --build" instead
of generating a native build tool invocation directly. This command
will internally invoke the proper native build tool.
This avoids requiring cmGlobalGenerator::GenerateBuildCommand to produce
a string so that it can be later refactored to produce a vector with no
quoting or escaping. It will also allow us to later teach CMake to
delay the decision about which build tool to invoke until after the
project build system is generated to disk. For example, on Visual
Studio 10 and above the preferred command-line tool is MSBuild, but we
need to fall back to devenv if the .sln has Intel Fortran .vfproj files.
Create a GenerateCMakeBuildCommand method to generate a command-line
string invoking "cmake --build" for a given target and configuration.
Optionally allow the "-i" make flag and additional native options.
This is a virtual method that is overridden by every generator
subclass. The base class implementation should never be called,
so replace it with a dummy implementation.
bf755c7 set: Add unit tests for set/unset PARENT_SCOPE
bc280f1 set: Fix handling of empty value with PARENT_SCOPE
20afbd5 set: Handle value-less PARENT_SCOPE explicitly
06b0dbe OS X: Drop version number from CMake.app bundle name (#11693)
84af42b Configure NSIS-packaged CMake version and install destination
7655029 Configure NSIS-packaged CMake documentation link in Start Menu
Just as
set(VAR "")
sets VAR to an empty string in the current scope, the code
set(VAR "" PARENT_SCOPE)
is documented to set the variable to an empty string in the parent
scope. Fix the implementation to make it so.
The code "set(VAR PARENT_SCOPE)" unsets VAR in the parent scope.
Implement this case explicitly next to where "set(VAR)" is explicitly
handled to unset VAR in the current scope.
3bade75 Help: Parse Copyright.txt instead of using current year
2bbf6bd Copyright.txt: Add test to check year range
3ee67d0 Copyright.txt: Update year range to end in 2013
621ba1f cmake-gui: Parse Copyright.txt instead of duplicating notice
993b685 bootstrap: Parse Copyright.txt instead of duplicating notice
Always name the application bundle "CMake.app". Users can rename it
after installation if they wish. This is the typical approach used by
OS X applications, including Xcode. It allows CMake to be upgraded
without manually re-running CMake in every build tree to update the path
to CMake. It also makes the executable location in the CMake build tree
more predicatable.
Refactor edit_cache tool selection to ask each global generator for its
preference. Teach the Ninja generator to always use cmake-gui because
Ninja by design cannot run interactive terminal dialogs like ccmake.
Teach the Makefile generator to use cmake-gui when also using an "extra"
generator whose IDE has no terminal to run ccmake, and otherwise fall
back to CMAKE_EDIT_COMMAND selection for normal Makefile build systems.
dcac9be Make accessors for compile-related information const.
19a8a3c cmTarget: Don't finalize include directories in GetIncludeDirectories.
3305364 cmGlobalGenerator: Rename the FinalizeCompileDefinitions method.
Rename cmSystemTools::FindExecutableDirectory to FindCMakeResources.
Teach it to compute the locations of cmake, ctest, cpack, ccmake, and
cmake-gui executables, and the location of CMAKE_ROOT. Provide this
information from static cmSystemTools::Get<resource>() methods.
Refactor code that needs these locations to use the new APIs.
Teach FindCMakeResources to use the OS X system API to lookup the
executable location. When running from the CMake build tree itself,
leave a file in the tree that FindCMakeResources can use to read the
location of the source tree. This avoids the need to compile the source
tree location into a binary that may be installed and used without the
source tree.
Teach the QtDialog on OS X to create a "cmake-gui" symlink in the build
tree next to "cmake" and the other tools, as is already done in the
install tree for the application bundle. This ensures a consistent set
of executables are available in one directory.
Replace the std::map<>::clear() method with one that first deletes
the cmExportSet instances held by each map entry, and then clears.
Otherwise the cmGlobalGenerator::ClearGeneratorMembers added by
commit 5cf1120f (cmGlobalGenerator: Refactor member cleanup between
configures, 2013-11-04) leaks the cmExportSet instances.
This change causes the GetLinkInterfaceDependentStringProperty method,
called in SetupAutoGenerateTarget, after the creation of generator
targets. In CMake 4.0, the GetLinkInterfaceDependentStringProperty
will move to the cmGeneratorTarget class, and this patch is a necessary
prerequisite to that.
The SetupAutoGenerateTarget method will soon be invoked at a later
time in a followup commit. We need to ensure that we create the
utility autogen target early.
In commit 18412153 (Refactor cmTarget::GetCompileDefinitions...,
2013-06-06) cmQtAutomoc was refactored to get all compile definitions
from the target instead of separately asking the target and querying the
directory-level COMPILE_DEFINITIONS property value. While the
generation process does integrate directory-level COMPILE_DEFINITIONS
into the target definitions, this did not happen until after Automoc
targets are constructed. Therefore the commit regressed use of
directory-level definitions in Automoc targets.
Factor the definition finalization logic out from the
cmGlobalGenerator::CreateGeneratorTargets method into a new
cmGlobalGenerator::FinalizeTargetCompileDefinitions method and call it
before constructing Automoc targets. This will place the
directory-level definitions into the target in time to use them for the
Automoc targets.
Extend the QtAutomoc test to cover this case.
Do not access an argument index not known to exist.
Port the change from commit 9ef66f2b (cmake: Validate -E cmake_automoc
argument count, 2013-11-05) to the new location of the code.
Factor member cleanup out from cmGlobalGenerator::Configure and the
destructor into a dedicated helper to avoid duplication. This fixes
clearing of BuildExportSets between configures.
In the CMake interactive dialogs cmGlobalGenerator::Configure may
run more than once. Clear the cmGlobalGenerator::EvaluationFiles
data between configures to avoid accessing deleted data.
b51696f CMP0022: Update target_link_libraries plain signature documentation
25b7f87 Merge branch 'policy-CMP0022-fixes' into policy-CMP0022-fixes-for-master
0a561a0 CMP0022: Warn about a given target at most once
23d21b7 Do not export INTERFACE_LINK_LIBRARIES from non-linkable targets
ef10b87 CMP0022: Plain target_link_libraries must populate link interface
0e06788 CMP0022: Add test for target_link_libraries plain signature
c0f4a61 CMP0022: Add unit test for null pointer check and message.
4b0cfa7 Merge branch 'output-CMP0022-entries' into policy-CMP0022-fixes
Resolve conflict in Source/cmTarget.cxx by integrating the changes to
the internal copy constructor from both sides. Also resolve a logical
conflict by dropping the special case for INTERFACE_LIBRARY targets.
Since cmTarget::SetMakefile already forces CMP0022 to NEW for such
targets we need no special handling.
Resolve conflict in Source/cmTargetLinkLibrariesCommand.h by dropping
the documentation change. We will make the same change in the new
location of the same documentation in a separate commit.
Resolve conflicts in
Tests/RunCMake/CMP0022/CMP0022-WARN-empty-old-stderr.txt
Tests/RunCMake/CMP0022/RunCMakeTest.cmake
by taking the side from the 'policy-CMP0022-fixes' branch.
Since cmTarget::ComputeLinkInterface is called separately for each
"head" target that links a target, the warning we produce when
CMP0022 is not set could be repeated. Add explicit logic to allow
the warning to appear at most once. Multiple copies of the warning
for the same target are almost always identical and therefore
redundant. In the rare case that two copies of the warning are
different, the second can appear in a future run after the first
is fixed.
When cmExportFileGenerator::SetImportLinkInterface exports the old
LINK_INTERFACE_LIBRARIES property values it skips doing so for
non-linkable targets because target->GetLinkInterface returns NULL for
such targets.
Since cmExportFileGenerator::PopulateInterfaceLinkLibrariesProperty
looks at the INTERFACE_LINK_LIBRARIES property directly instead of using
the computed link interface, teach it to skip exporting the property if
target->IsLinkable returns false.
Extend the RunCMake.CMP0022 test with a case covering this. Simply
export an executable target that links to a library that is not
exported.
The CMP0022 NEW behavior is that the INTERFACE_LINK_LIBRARIES property
exactly defines the link interface. The plain target_link_libraries
signature says linking is transitive by default, so it should populate
the property.
Teach the target_link_libraries plain signature to populate the
INTERFACE_LINK_LIBRARIES regardless of the CMP0022 setting. Refactor
the cmTarget::ComputeLinkInterface checks that warn when the policy is
not set to compare the new property to either the explicitly set old
link interface properties or the link implementation fallback for all
linkable target types, not just static libraries.
This fixes a regression in 2.8.12.0 that caused target_link_libraries to
not implement transitive linking in the plain signature once the policy
CMP0022 is set to NEW.
In commit c4373b33 (cmTarget: Make GetProperty() const, 2013-10-29)
we accidentally changed the cmFindCommon.cxx logic in a way that
looks like a local experiment leftover that went unnoticed due to
the size of the other changes in the commit. Revert it.
Make sure that CMakeCache.txt is the last file being removed since
the binary directory may be left in a state that is no longer
removable otherwise.
Also retry removal a couple of times which makes this more robust
on windows where file locks may temporarily prevent removal.
In commit c4373b33 (cmTarget: Make GetProperty() const, 2013-10-29)
we accidentally changed the cmTargetLinkLibrariesCommand.cxx logic
in a way that looks like a local experiment leftover that went
unnoticed due to the size of the other changes in the commit.
Revert it.
Kitware Robot
Brad King
Stephen Kelly
Ben Boeckel
Ben Boeckel
Alex Neundorf
Kevin Funk
Daniel Pfeifer
Timo Rothenpieler
Eran Ifrah
Clinton Stimpson
Nils Gladitz
Pedro Navarro
Ruslan Baratov
Rolf Eike Beer
Sergey Zolotarev
Matt McCormick
Rolf Eike Beer
Robert Maynard
David Golub
Flynn Marquardt
Stephan Tolksdorf
Peter Kümmel
Daniele E. Domenichelli
Modestas Vainius