On OS X, when CMAKE_USE_OPENSSL is OFF, use the OS implementation.
This will allow the OS-configured CA list to be trusted automatically.
This is supported on OS X 10.6 and above using AppleClang, Clang, and
GNU compilers.
Also add a 'CMAKE_ANDROID_API_MIN' variable to set the property
default. Teach the VS generator to write the MIN API value into
Nsight Tegra project files.
When install(EXPORT) is given an absolute destination we cannot compute
the install prefix relative to the installed export file location.
Previously we disallowed installation of targets in such exports with a
relative destination, but did not enforce this for target property
values besides the location of the main target file. This could lead to
broken installations when the EXPORT is installed to an absolute path
but usage requirements are specified relative to the install prefix.
Since an EXPORT installed to an absolute destination cannot be relocated
we can just hard-code the value of CMAKE_INSTALL_PREFIX as the base for
relative paths. This will allow absolute install(EXPORT) destinations
to work with relative destinations for targets and usage requirements.
Extend the ExportImport test with a case covering this behavior.
The use of FeatureSummary inside a find module is not a convention
yet used by upstream CMake modules. Drop the example from the
documentation about how to write find modules. If in the future
we add use of FeatureSummary to many of the upstream find modules
then this example can be restored as part of establishing the
convention.
The use of FeatureSummary inside a find module is not a convention
yet used by upstream CMake modules. Drop the example from the
documentation about how to write find modules. If in the future
we add use of FeatureSummary to many of the upstream find modules
then this example can be restored as part of establishing the
convention.
In commit v3.1.0-rc1~484^2 (Help: Format and revise file() command
documentation, 2014-05-23) the signature of file(GENERATE) was
accidentally simplified too much and dropped specification of the
required argument ordering. Restore the signature to make the order
clear.
If this option is enabled, the test step is created with the
EXCLUDE_FROM_MAIN option, and if TEST_BEFORE_INSTALL is enabled, the
install step does not depend on the test step.
This means that the test step is never executed, unless the test target
is explicitly created by calling ExternalProject_Add_StepTarget, or by
passing it with the STEP_TARGETS option, or with the EP_STEP_TARGETS
directory property.
An IMPORTED target in either type of package can equally depend on
an IMPORTED target in a Find module, which must be found as a
dependency, which is presumably the problem being implied. This is
not a distinction of creating an IMPORTED target in a Find module.
The FindXerces module was added in commit v3.1.0-rc1~155^2 (FindXerces:
New module to find Apache Xerces-C++, 2014-08-17). However, there are
two implementations of Xerces, one in C++:
http://xerces.apache.org/xerces-c/
and one in Java:
http://xerces.apache.org/xerces-j/
Rename FindXerces to FindXercesC to clarify that it is about the C++
implementation.
While at it, add the missing CMake 3.1 release note about this module.
Suggested-by: Erik Sjölund <erik.sjolund@gmail.com>
Copy CMAKE_EXE_LINKER_FLAGS into the test project generated by
try_compile, just like we already copy CMAKE_<LANG>_FLAGS.
Add CMake Policy CMP0056 to activate this behavior in a compatible way,
but do not warn by default when the policy is not set since it will
affect all try_compile calls.
Extend the RunCMake.try_compile test with a case covering this behavior
for each policy setting.
With PushScope and PopScope, keeping track of another bit of data for
each scope isn't easy. Instead, store it as another CMake variable so it
gets implicitly tracked along with everything else.
This works in a revert of commit
7d674b5f0b.
Provide options to fail without blocking or to block up to a timeout.
Provide options to specify the scope containing the lock so it can be
released automatically at the end of a function, file, or process.
Extend the RunCMake.file test with cases covering the file(LOCK) command
usage and error cases.
Add a VS_DEPLOYMENT_LOCATION source file property to specify where to
put files that are part of the package. For example:
set_property(SOURCE ${ASSET_FILES} PROPERTY VS_DEPLOYMENT_LOCATION "assets")
Without this, sources marked with VS_DEPLOYMENT_CONTENT cannot be
located properly.
Create properties VS_SHADER_ENTRYPOINT and VS_SHADER_MODEL. Without
these many .hlsl source files may not be possible to use. Extend the
VSWinStorePhone test project to cover them.
Revert the feature added by commit v3.1.0-rc1~420^2~2 (FindOpenGL:
Provide imported targets for GL and GLU, 2014-05-31). Unfortunately it
does not work on Windows because the full path to each library file is
not actually known. The IMPORTED_LOCATION of an imported target must be
a full path, but OPENGL_gl_LIBRARY is just 'opengl32' on Windows because
the actual library file is in some implicit link directory that we may
know know.
More infrastructure will be needed in CMake to allow a name-only
imported library. Until that exists, we will not be able to provide
imported targets in FindOpenGL.
In commit 079e8469ab (... OpenGL always needs X11 on Unix, 2002-09-05)
the FindOpenGL module was taught to search for X11 as a dependency of
the OpenGL library. This was done without a detailed explanation, and
the dependency should not be explicitly needed because OpenGL headers
should not expose applications to X11 APIs directly.
Unfortunately the only way to know if anything legitimately depends on
this behavior (perhaps in static library cases) is to simply remove it
and wait for issues to be reported. If so, then we can add some kind of
compatibility setting for this later. Add a release note to draw
attention to this change.
Reported-by: Dainius "GreatEmerald" Masiliūnas <pastas4@gmail.com>
Some applications only need the OpenSSL crypto library and want to avoid
linking against the SSL library. Set OPENSSL_CRYPTO_LIBRARY and
OPENSSL_SSL_LIBRARY in the code paths that do not need to find them
separately, and document them publicly. This allows applications to be
more specific when linking against OpenSSL.
8a75c7ef Help: Document the export limitation of INTERFACE_SOURCES.
e1348056 Export: Disallow export of targets with INTERFACE_SOURCES
bb5905bb cmTarget: Don't allow relative paths in INTERFACE_SOURCES
Since commit v3.1.0-rc1~479^2~1 (Add an "installed file" property
scope, 2014-05-15) the get_property and set_property commands
support an 'INSTALL' scope. Add documentation for this scope.
bb1111ea Help: Warn that paths should not be used in INTERFACE_ build properties.
96691d12 Help: Fix typo in genex in documentation.
f8f02451 Help: Use a property-specific command instead of the generic one.
8609a884 Help: Make remaining build property docs consistent.
bcface39 Help: Link to target_link_libraries from target properies.
e12926e7 Help: Format the LINK_INTERFACE_LIBRARIES target properies.
c8540e94 Help: Unify the help text of INTERFACE_ build properties.
Since commit v2.8.11~227^2~1 (Don't allow targets args in the new target
commands, 2013-01-29) the target_include_directories command does not
support target names on the right hand side, but that commit forgot to
remove it from the docs. It was never released with such support.
Update the command documentation now.
2d75d7e5 Help: Add notes for topic 'console-pool'
f42d86f0 Ninja: Implement USES_TERMINAL using the console pool if available
f281ae01 Ninja: Remove unused declaration
d5eae556 Ninja: factor out the test for console pool support
4d1fedf4 Give the interactive cache editor the USES_TERMINAL property
fe5d6e8c Add USES_TERMINAL option for custom commands
ad6ee426 Rename doing_verbatim to doing_nothing
Brad King
Tim Blechmann
Dmitry Polyanitsa
Kelly Thompson
Nils Gladitz
Daniele E. Domenichelli
Stephen Kelly
Ben Boeckel
Ruslan Baratov
Gilles Khouzam
Cedric Perthuis
David Demelier
Gregor Jasny
Hannes Mezger
Christopher Dembia
Christoph Grüninger