From be089724e943da786c35fddceb8d9b0e7a9fb2f5 Mon Sep 17 00:00:00 2001 From: Domen Vrankar Date: Mon, 16 Mar 2015 22:17:17 +0100 Subject: [PATCH] CPack/RPM prevent component attributes leakage Fixes mantis bug report with id 15169. Some component specific attributes were leaking to next component. Leakage handling was implemented in different locations but there were still attributes that leaked. Patch encapsulates generator into function so all current leaks are fixed and no future leaks can occur. --- Modules/CPackRPM.cmake | 1355 ++++++++++++++++++++-------------------- 1 file changed, 662 insertions(+), 693 deletions(-) diff --git a/Modules/CPackRPM.cmake b/Modules/CPackRPM.cmake index fce8236b2..539a0aa66 100644 --- a/Modules/CPackRPM.cmake +++ b/Modules/CPackRPM.cmake @@ -494,709 +494,687 @@ if(NOT UNIX) message(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.") endif() -# rpmbuild is the basic command for building RPM package -# it may be a simple (symbolic) link to rpm command. -find_program(RPMBUILD_EXECUTABLE rpmbuild) +function(cpack_rpm_generate_package) + # rpmbuild is the basic command for building RPM package + # it may be a simple (symbolic) link to rpm command. + find_program(RPMBUILD_EXECUTABLE rpmbuild) -# Check version of the rpmbuild tool this would be easier to -# track bugs with users and CPackRPM debug mode. -# We may use RPM version in order to check for available version dependent features -if(RPMBUILD_EXECUTABLE) - execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version - OUTPUT_VARIABLE _TMP_VERSION - ERROR_QUIET - OUTPUT_STRIP_TRAILING_WHITESPACE) - string(REGEX REPLACE "^.* " "" - RPMBUILD_EXECUTABLE_VERSION - ${_TMP_VERSION}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>") - endif() -endif() - -if(NOT RPMBUILD_EXECUTABLE) - message(FATAL_ERROR "RPM package requires rpmbuild executable") -endif() - -# Display lsb_release output if DEBUG mode enable -# This will help to diagnose problem with CPackRPM -# because we will know on which kind of Linux we are -if(CPACK_RPM_PACKAGE_DEBUG) - find_program(LSB_RELEASE_EXECUTABLE lsb_release) - if(LSB_RELEASE_EXECUTABLE) - execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a - OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT + # Check version of the rpmbuild tool this would be easier to + # track bugs with users and CPackRPM debug mode. + # We may use RPM version in order to check for available version dependent features + if(RPMBUILD_EXECUTABLE) + execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version + OUTPUT_VARIABLE _TMP_VERSION ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE) - string(REGEX REPLACE "\n" ", " - LSB_RELEASE_OUTPUT - ${_TMP_LSB_RELEASE_OUTPUT}) - else () - set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!") - endif() - message("CPackRPM:Debug: LSB_RELEASE = ${LSB_RELEASE_OUTPUT}") -endif() - -# We may use RPM version in the future in order -# to shut down warning about space in buildtree -# some recent RPM version should support space in different places. -# not checked [yet]. -if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") - message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.") -endif() - -# If rpmbuild is found -# we try to discover alien since we may be on non RPM distro like Debian. -# In this case we may try to to use more advanced features -# like generating RPM directly from DEB using alien. -# FIXME feature not finished (yet) -find_program(ALIEN_EXECUTABLE alien) -if(ALIEN_EXECUTABLE) - message(STATUS "alien found, we may be on a Debian based distro.") -endif() - -# Are we packaging components ? -if(CPACK_RPM_PACKAGE_COMPONENT) - set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}") - string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER) -else() - set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "") -endif() - -set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}") - -# -# Use user-defined RPM specific variables value -# or generate reasonable default value from -# CPACK_xxx generic values. -# The variables comes from the needed (mandatory or not) -# values found in the RPM specification file aka ".spec" file. -# The variables which may/should be defined are: -# - -# CPACK_RPM_PACKAGE_SUMMARY (mandatory) - -# CPACK_RPM_PACKAGE_SUMMARY_ is used only locally so that it can be unset each time before use otherwise -# component packaging could leak variable content between components -unset(CPACK_RPM_PACKAGE_SUMMARY_) -if(CPACK_RPM_PACKAGE_SUMMARY) - set(CPACK_RPM_PACKAGE_SUMMARY_ ${CPACK_RPM_PACKAGE_SUMMARY}) - unset(CPACK_RPM_PACKAGE_SUMMARY) -endif() - -#Check for component summary first. -#If not set, it will use regular package summary logic. -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY) - set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY}) - endif() -endif() - -if(NOT CPACK_RPM_PACKAGE_SUMMARY) - if(CPACK_RPM_PACKAGE_SUMMARY_) - set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_}) - elseif(CPACK_PACKAGE_DESCRIPTION_SUMMARY) - set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY}) - else() - # if neither var is defined lets use the name as summary - string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) - endif() -endif() - -# CPACK_RPM_PACKAGE_NAME (mandatory) -if(NOT CPACK_RPM_PACKAGE_NAME) - string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME) -endif() - -# CPACK_RPM_PACKAGE_VERSION (mandatory) -if(NOT CPACK_RPM_PACKAGE_VERSION) - if(NOT CPACK_PACKAGE_VERSION) - message(FATAL_ERROR "RPM package requires a package version") - endif() - set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION}) -endif() -# Replace '-' in version with '_' -# '-' character is an Illegal RPM version character -# it is illegal because it is used to separate -# RPM "Version" from RPM "Release" -string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION}) - -# CPACK_RPM_PACKAGE_ARCHITECTURE (mandatory) -if(NOT CPACK_RPM_PACKAGE_ARCHITECTURE) - execute_process(COMMAND uname "-m" - OUTPUT_VARIABLE CPACK_RPM_PACKAGE_ARCHITECTURE - OUTPUT_STRIP_TRAILING_WHITESPACE) -else() - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}") - endif() -endif() - -set(_CPACK_RPM_PACKAGE_ARCHITECTURE ${CPACK_RPM_PACKAGE_ARCHITECTURE}) - -#prefer component architecture -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE) - set(_CPACK_RPM_PACKAGE_ARCHITECTURE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE}) + string(REGEX REPLACE "^.* " "" + RPMBUILD_EXECUTABLE_VERSION + ${_TMP_VERSION}) if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: using component build arch = ${_CPACK_RPM_PACKAGE_ARCHITECTURE}") + message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>") endif() endif() -endif() -if(${_CPACK_RPM_PACKAGE_ARCHITECTURE} STREQUAL "noarch") - set(TMP_RPM_BUILDARCH "Buildarch: ${_CPACK_RPM_PACKAGE_ARCHITECTURE}") -else() - set(TMP_RPM_BUILDARCH "") -endif() -# CPACK_RPM_PACKAGE_RELEASE -# The RPM release is the numbering of the RPM package ITSELF -# this is the version of the PACKAGING and NOT the version -# of the CONTENT of the package. -# You may well need to generate a new RPM package release -# without changing the version of the packaged software. -# This is the case when the packaging is buggy (not) the software :=) -# If not set, 1 is a good candidate -if(NOT CPACK_RPM_PACKAGE_RELEASE) - set(CPACK_RPM_PACKAGE_RELEASE 1) -endif() - -# CPACK_RPM_PACKAGE_LICENSE -if(NOT CPACK_RPM_PACKAGE_LICENSE) - set(CPACK_RPM_PACKAGE_LICENSE "unknown") -endif() - -# CPACK_RPM_PACKAGE_GROUP -if(NOT CPACK_RPM_PACKAGE_GROUP) - set(CPACK_RPM_PACKAGE_GROUP "unknown") -endif() - -# CPACK_RPM_PACKAGE_VENDOR -if(NOT CPACK_RPM_PACKAGE_VENDOR) - if(CPACK_PACKAGE_VENDOR) - set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}") - else() - set(CPACK_RPM_PACKAGE_VENDOR "unknown") + if(NOT RPMBUILD_EXECUTABLE) + message(FATAL_ERROR "RPM package requires rpmbuild executable") endif() -endif() - -# CPACK_RPM_PACKAGE_SOURCE -# The name of the source tarball in case we generate a source RPM - -# CPACK_RPM_PACKAGE_DESCRIPTION -# The variable content may be either -# - explicitly given by the user or -# - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE -# if it is defined -# - set to a default value -# - -# CPACK_RPM_PACKAGE_DESCRIPTION_ is used only locally so that it can be unset each time before use otherwise -# component packaging could leak variable content between components -unset(CPACK_RPM_PACKAGE_DESCRIPTION_) -if(CPACK_RPM_PACKAGE_DESCRIPTION) - set(CPACK_RPM_PACKAGE_DESCRIPTION_ ${CPACK_RPM_PACKAGE_DESCRIPTION}) - unset(CPACK_RPM_PACKAGE_DESCRIPTION) -endif() - -#Check for a component description first. -#If not set, it will use regular package description logic. -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION) - set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION}) - elseif(CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION) - set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION}) - endif() -endif() - -if(NOT CPACK_RPM_PACKAGE_DESCRIPTION) - if(CPACK_RPM_PACKAGE_DESCRIPTION_) - set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_}) - elseif(CPACK_PACKAGE_DESCRIPTION_FILE) - file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) - else () - set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") - endif () -endif () - -# CPACK_RPM_COMPRESSION_TYPE -# -if (CPACK_RPM_COMPRESSION_TYPE) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}") - endif() - if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma") - set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio") - endif() - if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz") - set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio") - endif() - if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2") - set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio") - endif() - if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip") - set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio") - endif() -else() - set(CPACK_RPM_COMPRESSION_TYPE_TMP "") -endif() - -if(CPACK_PACKAGE_RELOCATABLE) - set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) -endif() -if(CPACK_RPM_PACKAGE_RELOCATABLE) - unset(TMP_RPM_PREFIXES) + # Display lsb_release output if DEBUG mode enable + # This will help to diagnose problem with CPackRPM + # because we will know on which kind of Linux we are if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Trying to build a relocatable package") - endif() - if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) - message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") - else() - set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files) - cpack_rpm_prepare_relocation_paths() - endif() -endif() - -# Check if additional fields for RPM spec header are given -# There may be some COMPONENT specific variables as well -# If component specific var is not provided we use the global one -# for each component -foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") + find_program(LSB_RELEASE_EXECUTABLE lsb_release) + if(LSB_RELEASE_EXECUTABLE) + execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a + OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT + ERROR_QUIET + OUTPUT_STRIP_TRAILING_WHITESPACE) + string(REGEX REPLACE "\n" ", " + LSB_RELEASE_OUTPUT + ${_TMP_LSB_RELEASE_OUTPUT}) + else () + set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!") endif() - if(CPACK_RPM_PACKAGE_COMPONENT) - if(DEFINED CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: using CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}") - endif() - set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}}) - else() - if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER} not defined") - message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") - endif() - set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) - endif() - endif() + message("CPackRPM:Debug: LSB_RELEASE = ${LSB_RELEASE_OUTPUT}") + endif() + + # We may use RPM version in the future in order + # to shut down warning about space in buildtree + # some recent RPM version should support space in different places. + # not checked [yet]. + if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") + message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.") + endif() + + # If rpmbuild is found + # we try to discover alien since we may be on non RPM distro like Debian. + # In this case we may try to to use more advanced features + # like generating RPM directly from DEB using alien. + # FIXME feature not finished (yet) + find_program(ALIEN_EXECUTABLE alien) + if(ALIEN_EXECUTABLE) + message(STATUS "alien found, we may be on a Debian based distro.") + endif() + + # Are we packaging components ? + if(CPACK_RPM_PACKAGE_COMPONENT) + set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}") + string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER) + else() + set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "") + endif() + + set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}") + + # + # Use user-defined RPM specific variables value + # or generate reasonable default value from + # CPACK_xxx generic values. + # The variables comes from the needed (mandatory or not) + # values found in the RPM specification file aka ".spec" file. + # The variables which may/should be defined are: + # + + # CPACK_RPM_PACKAGE_SUMMARY (mandatory) + + #Check for component summary first. + #If not set, it will use regular package summary logic. + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY}) + endif() + endif() + + if(NOT CPACK_RPM_PACKAGE_SUMMARY) + if(CPACK_PACKAGE_DESCRIPTION_SUMMARY) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY}) else() - if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") - endif() - set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) - endif() + # if neither var is defined lets use the name as summary + string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) endif() + endif() - # Do not forget to unset previously set header (from previous component) - unset(TMP_RPM_${_RPM_SPEC_HEADER}) - # Treat the RPM Spec keyword iff it has been properly defined - if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) - # Transform NAME --> Name e.g. PROVIDES --> Provides - # The Upper-case first letter and lowercase tail is the - # appropriate value required in the final RPM spec file. - string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL) - string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL) - string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) - set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}") - # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file. - set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) - list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND) - if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1) - string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}") - set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME})") + # CPACK_RPM_PACKAGE_NAME (mandatory) + if(NOT CPACK_RPM_PACKAGE_NAME) + string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME) + endif() + + # CPACK_RPM_PACKAGE_VERSION (mandatory) + if(NOT CPACK_RPM_PACKAGE_VERSION) + if(NOT CPACK_PACKAGE_VERSION) + message(FATAL_ERROR "RPM package requires a package version") endif() + set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION}) + endif() + # Replace '-' in version with '_' + # '-' character is an Illegal RPM version character + # it is illegal because it is used to separate + # RPM "Version" from RPM "Release" + string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION}) + + # CPACK_RPM_PACKAGE_ARCHITECTURE (mandatory) + if(NOT CPACK_RPM_PACKAGE_ARCHITECTURE) + execute_process(COMMAND uname "-m" + OUTPUT_VARIABLE CPACK_RPM_PACKAGE_ARCHITECTURE + OUTPUT_STRIP_TRAILING_WHITESPACE) + else() if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") + message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}") endif() - set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") - unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) endif() -endforeach() -# CPACK_RPM_SPEC_INSTALL_POST -# May be used to define a RPM post intallation script -# for example setting it to "/bin/true" may prevent -# rpmbuild from stripping binaries. -if(CPACK_RPM_SPEC_INSTALL_POST) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}") + set(_CPACK_RPM_PACKAGE_ARCHITECTURE ${CPACK_RPM_PACKAGE_ARCHITECTURE}) + + #prefer component architecture + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE) + set(_CPACK_RPM_PACKAGE_ARCHITECTURE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using component build arch = ${_CPACK_RPM_PACKAGE_ARCHITECTURE}") + endif() + endif() + endif() + if(${_CPACK_RPM_PACKAGE_ARCHITECTURE} STREQUAL "noarch") + set(TMP_RPM_BUILDARCH "Buildarch: ${_CPACK_RPM_PACKAGE_ARCHITECTURE}") + else() + set(TMP_RPM_BUILDARCH "") endif() - set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}") -endif() -# CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM__POST_INSTALL_SCRIPT_FILE) -# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM__POST_UNINSTALL_SCRIPT_FILE) -# May be used to embed a post (un)installation script in the spec file. -# The refered script file(s) will be read and directly -# put after the %post or %postun section -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE) - set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE}) + # CPACK_RPM_PACKAGE_RELEASE + # The RPM release is the numbering of the RPM package ITSELF + # this is the version of the PACKAGING and NOT the version + # of the CONTENT of the package. + # You may well need to generate a new RPM package release + # without changing the version of the packaged software. + # This is the case when the packaging is buggy (not) the software :=) + # If not set, 1 is a good candidate + if(NOT CPACK_RPM_PACKAGE_RELEASE) + set(CPACK_RPM_PACKAGE_RELEASE 1) + endif() + + # CPACK_RPM_PACKAGE_LICENSE + if(NOT CPACK_RPM_PACKAGE_LICENSE) + set(CPACK_RPM_PACKAGE_LICENSE "unknown") + endif() + + # CPACK_RPM_PACKAGE_GROUP + if(NOT CPACK_RPM_PACKAGE_GROUP) + set(CPACK_RPM_PACKAGE_GROUP "unknown") + endif() + + # CPACK_RPM_PACKAGE_VENDOR + if(NOT CPACK_RPM_PACKAGE_VENDOR) + if(CPACK_PACKAGE_VENDOR) + set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}") + else() + set(CPACK_RPM_PACKAGE_VENDOR "unknown") + endif() + endif() + + # CPACK_RPM_PACKAGE_SOURCE + # The name of the source tarball in case we generate a source RPM + + # CPACK_RPM_PACKAGE_DESCRIPTION + # The variable content may be either + # - explicitly given by the user or + # - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE + # if it is defined + # - set to a default value + # + + #Check for a component description first. + #If not set, it will use regular package description logic. + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION}) + elseif(CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION}) + endif() + endif() + + if(NOT CPACK_RPM_PACKAGE_DESCRIPTION) + if(CPACK_PACKAGE_DESCRIPTION_FILE) + file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) + else () + set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") + endif () + endif () + + # CPACK_RPM_COMPRESSION_TYPE + # + if (CPACK_RPM_COMPRESSION_TYPE) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}") + endif() + if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma") + set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio") + endif() + if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz") + set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio") + endif() + if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2") + set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio") + endif() + if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip") + set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio") + endif() + else() + set(CPACK_RPM_COMPRESSION_TYPE_TMP "") + endif() + + if(CPACK_PACKAGE_RELOCATABLE) + set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) + endif() + if(CPACK_RPM_PACKAGE_RELOCATABLE) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Trying to build a relocatable package") + endif() + if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) + message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") + else() + set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files) + cpack_rpm_prepare_relocation_paths() + endif() + endif() + + # Check if additional fields for RPM spec header are given + # There may be some COMPONENT specific variables as well + # If component specific var is not provided we use the global one + # for each component + foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") + endif() + if(CPACK_RPM_PACKAGE_COMPONENT) + if(DEFINED CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}") + endif() + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}}) + else() + if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER} not defined") + message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") + endif() + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) + endif() + endif() + else() + if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") + endif() + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) + endif() + endif() + + # Treat the RPM Spec keyword iff it has been properly defined + if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) + # Transform NAME --> Name e.g. PROVIDES --> Provides + # The Upper-case first letter and lowercase tail is the + # appropriate value required in the final RPM spec file. + string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL) + string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL) + string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) + set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}") + # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file. + set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) + list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND) + if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1) + string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}") + set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME})") + endif() + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") + endif() + set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") + unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) + endif() + endforeach() + + # CPACK_RPM_SPEC_INSTALL_POST + # May be used to define a RPM post intallation script + # for example setting it to "/bin/true" may prevent + # rpmbuild from stripping binaries. + if(CPACK_RPM_SPEC_INSTALL_POST) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}") + endif() + set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}") + endif() + + # CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM__POST_INSTALL_SCRIPT_FILE) + # CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM__POST_UNINSTALL_SCRIPT_FILE) + # May be used to embed a post (un)installation script in the spec file. + # The refered script file(s) will be read and directly + # put after the %post or %postun section + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE) + set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) + endif() + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE) + set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) + endif() else() set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) - endif() - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE) - set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE}) - else() set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) endif() -else() - set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) - set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) -endif() -# Handle post-install file if it has been specified -if(CPACK_RPM_POST_INSTALL_READ_FILE) - if(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) - file(READ ${CPACK_RPM_POST_INSTALL_READ_FILE} CPACK_RPM_SPEC_POSTINSTALL) + # Handle post-install file if it has been specified + if(CPACK_RPM_POST_INSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) + file(READ ${CPACK_RPM_POST_INSTALL_READ_FILE} CPACK_RPM_SPEC_POSTINSTALL) + else() + message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_READ_FILE}> does not exists - ignoring") + endif() else() - message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_READ_FILE}> does not exists - ignoring") + # reset SPEC var value if no post install file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_POSTINSTALL "") endif() -else() - # reset SPEC var value if no post install file has been specified - # (either globally or component-wise) - set(CPACK_RPM_SPEC_POSTINSTALL "") -endif() -# Handle post-uninstall file if it has been specified -if(CPACK_RPM_POST_UNINSTALL_READ_FILE) - if(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) - file(READ ${CPACK_RPM_POST_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_POSTUNINSTALL) + # Handle post-uninstall file if it has been specified + if(CPACK_RPM_POST_UNINSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) + file(READ ${CPACK_RPM_POST_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_POSTUNINSTALL) + else() + message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_READ_FILE}> does not exists - ignoring") + endif() else() - message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_READ_FILE}> does not exists - ignoring") + # reset SPEC var value if no post uninstall file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_POSTUNINSTALL "") endif() -else() - # reset SPEC var value if no post uninstall file has been specified - # (either globally or component-wise) - set(CPACK_RPM_SPEC_POSTUNINSTALL "") -endif() -# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM__PRE_INSTALL_SCRIPT_FILE) -# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM__PRE_UNINSTALL_SCRIPT_FILE) -# May be used to embed a pre (un)installation script in the spec file. -# The refered script file(s) will be read and directly -# put after the %pre or %preun section -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE) - set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE}) + # CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM__PRE_INSTALL_SCRIPT_FILE) + # CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM__PRE_UNINSTALL_SCRIPT_FILE) + # May be used to embed a pre (un)installation script in the spec file. + # The refered script file(s) will be read and directly + # put after the %pre or %preun section + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE) + set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) + endif() + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE) + set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) + endif() else() set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) - endif() - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE) - set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE}) - else() set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) endif() -else() - set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) - set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) -endif() -# Handle pre-install file if it has been specified -if(CPACK_RPM_PRE_INSTALL_READ_FILE) - if(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) - file(READ ${CPACK_RPM_PRE_INSTALL_READ_FILE} CPACK_RPM_SPEC_PREINSTALL) - else() - message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_READ_FILE}> does not exists - ignoring") - endif() -else() - # reset SPEC var value if no pre-install file has been specified - # (either globally or component-wise) - set(CPACK_RPM_SPEC_PREINSTALL "") -endif() - -# Handle pre-uninstall file if it has been specified -if(CPACK_RPM_PRE_UNINSTALL_READ_FILE) - if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) - file(READ ${CPACK_RPM_PRE_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_PREUNINSTALL) - else() - message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_READ_FILE}> does not exists - ignoring") - endif() -else() - # reset SPEC var value if no pre-uninstall file has been specified - # (either globally or component-wise) - set(CPACK_RPM_SPEC_PREUNINSTALL "") -endif() - -# CPACK_RPM_CHANGELOG_FILE -# May be used to embed a changelog in the spec file. -# The refered file will be read and directly put after the %changelog section -if(CPACK_RPM_CHANGELOG_FILE) - if(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) - file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG) - else() - message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring") - endif() -else() - set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n Generated by CPack RPM (no Changelog file were provided)") -endif() - -# CPACK_RPM_SPEC_MORE_DEFINE -# This is a generated spec rpm file spaceholder -if(CPACK_RPM_SPEC_MORE_DEFINE) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}") - endif() -endif() - -# Now we may create the RPM build tree structure -set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}") -message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}") -# Prepare RPM build tree -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS) - -#set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${_CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm") -set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}") -# it seems rpmbuild can't handle spaces in the path -# neither escaping (as below) nor putting quotes around the path seem to help -#string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") -set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") - -# if we are creating a relocatable package, omit parent directories of -# CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list" -# which is passed to the find command that generates the content-list -if(CPACK_RPM_PACKAGE_RELOCATABLE) - # get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are - # destinct parent paths of other relocation paths and remove the - # final element (so the install-prefix dir itself is not omitted - # from the RPM's content-list) - list(SORT RPM_USED_PACKAGE_PREFIXES) - set(_DISTINCT_PATH "NOT_SET") - foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES}) - if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*") - set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}") - - string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS ".${_RPM_RELOCATION_PREFIX}") - list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1) - unset(_TMP_LIST) - # Now generate all of the parent dirs of the relocation path - foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS}) - list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}") - string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}") - list(FIND _RPM_DIRS_TO_OMIT "${_OMIT_DIR}" _DUPLICATE_FOUND) - if(_DUPLICATE_FOUND EQUAL -1) - set(_OMIT_DIR "-o -path ${_OMIT_DIR}") - separate_arguments(_OMIT_DIR) - list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR}) - endif() - endforeach() + # Handle pre-install file if it has been specified + if(CPACK_RPM_PRE_INSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) + file(READ ${CPACK_RPM_PRE_INSTALL_READ_FILE} CPACK_RPM_SPEC_PREINSTALL) + else() + message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_READ_FILE}> does not exists - ignoring") endif() - endforeach() -endif() - -if (CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") -endif() - -if (NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) - set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include) - if (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION) - message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.") - list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}") + else() + # reset SPEC var value if no pre-install file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_PREINSTALL "") + endif() + + # Handle pre-uninstall file if it has been specified + if(CPACK_RPM_PRE_UNINSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) + file(READ ${CPACK_RPM_PRE_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_PREUNINSTALL) + else() + message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_READ_FILE}> does not exists - ignoring") + endif() + else() + # reset SPEC var value if no pre-uninstall file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_PREUNINSTALL "") + endif() + + # CPACK_RPM_CHANGELOG_FILE + # May be used to embed a changelog in the spec file. + # The refered file will be read and directly put after the %changelog section + if(CPACK_RPM_CHANGELOG_FILE) + if(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) + file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG) + else() + message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring") + endif() + else() + set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n Generated by CPack RPM (no Changelog file were provided)") + endif() + + # CPACK_RPM_SPEC_MORE_DEFINE + # This is a generated spec rpm file spaceholder + if(CPACK_RPM_SPEC_MORE_DEFINE) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}") + endif() + endif() + + # Now we may create the RPM build tree structure + set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}") + message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}") + # Prepare RPM build tree + file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}) + file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp) + file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD) + file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS) + file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES) + file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS) + file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS) + + #set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${_CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm") + set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}") + # it seems rpmbuild can't handle spaces in the path + # neither escaping (as below) nor putting quotes around the path seem to help + #string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") + set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") + + # if we are creating a relocatable package, omit parent directories of + # CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list" + # which is passed to the find command that generates the content-list + if(CPACK_RPM_PACKAGE_RELOCATABLE) + # get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are + # destinct parent paths of other relocation paths and remove the + # final element (so the install-prefix dir itself is not omitted + # from the RPM's content-list) + list(SORT RPM_USED_PACKAGE_PREFIXES) + set(_DISTINCT_PATH "NOT_SET") + foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES}) + if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*") + set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}") + + string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS ".${_RPM_RELOCATION_PREFIX}") + list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1) + unset(_TMP_LIST) + # Now generate all of the parent dirs of the relocation path + foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS}) + list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}") + string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}") + list(FIND _RPM_DIRS_TO_OMIT "${_OMIT_DIR}" _DUPLICATE_FOUND) + if(_DUPLICATE_FOUND EQUAL -1) + set(_OMIT_DIR "-o -path ${_OMIT_DIR}") + separate_arguments(_OMIT_DIR) + list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR}) + endif() + endforeach() + endif() + endforeach() endif() -endif() -if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) if (CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}") - endif() - foreach(_DIR ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}) - list(APPEND _RPM_DIRS_TO_OMIT "-o;-path;.${_DIR}") - endforeach() -endif() -if (CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") -endif() + message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") + endif() -# Use files tree to construct files command (spec file) -# We should not forget to include symlinks (thus -o -type l) -# We should include directory as well (thus -type d) -# but not the main local dir "." (thus -a -not -name ".") -# We must remove the './' due to the local search and escape the -# file name by enclosing it between double quotes (thus the sed) -# Then we must authorize any man pages extension (adding * at the end) -# because rpmbuild may automatically compress those files -execute_process(COMMAND find . -type f -o -type l -o (-type d -a -not ( -name "." ${_RPM_DIRS_TO_OMIT} ) ) - COMMAND sed s:.*/man.*/.*:&*: - COMMAND sed s/\\.\\\(.*\\\)/\"\\1\"/ - WORKING_DIRECTORY "${WDIR}" - OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES) + if (NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) + set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include) + if (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION) + message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.") + list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}") + endif() + endif() -# In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_ -# into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL -# otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES -# This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_ABSOLUTE_DESTINATION_FILES) - set(COMPONENT_FILES_TAG "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}") - set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}") - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>") - message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") + if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) + if (CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}") endif() + foreach(_DIR ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}) + list(APPEND _RPM_DIRS_TO_OMIT "-o;-path;.${_DIR}") + endforeach() endif() -else() - if(CPACK_ABSOLUTE_DESTINATION_FILES) - set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}") + if (CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") endif() -endif() -# In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM__USER_FILELIST. -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST) - set(CPACK_RPM_USER_FILELIST_INTERNAL ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST}) + # Use files tree to construct files command (spec file) + # We should not forget to include symlinks (thus -o -type l) + # We should include directory as well (thus -type d) + # but not the main local dir "." (thus -a -not -name ".") + # We must remove the './' due to the local search and escape the + # file name by enclosing it between double quotes (thus the sed) + # Then we must authorize any man pages extension (adding * at the end) + # because rpmbuild may automatically compress those files + execute_process(COMMAND find . -type f -o -type l -o (-type d -a -not ( -name "." ${_RPM_DIRS_TO_OMIT} ) ) + COMMAND sed s:.*/man.*/.*:&*: + COMMAND sed s/\\.\\\(.*\\\)/\"\\1\"/ + WORKING_DIRECTORY "${WDIR}" + OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES) + + # In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_ + # into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL + # otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES + # This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_ABSOLUTE_DESTINATION_FILES) + set(COMPONENT_FILES_TAG "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}") + set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}") + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>") + message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") + endif() + endif() + else() + if(CPACK_ABSOLUTE_DESTINATION_FILES) + set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}") + endif() + endif() + + # In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM__USER_FILELIST. + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST) + set(CPACK_RPM_USER_FILELIST_INTERNAL ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") + message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") + endif() + else() + set(CPACK_RPM_USER_FILELIST_INTERNAL "") + endif() + else() + if(CPACK_RPM_USER_FILELIST) + set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}") + else() + set(CPACK_RPM_USER_FILELIST_INTERNAL "") + endif() + endif() + + # Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL + # Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL + # or CPACK_RPM_INSTALL_FILES, + # hence it must be done before these auto-generated lists are processed. + if(CPACK_RPM_USER_FILELIST_INTERNAL) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") - message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") + endif() + + # Create CMake list from CPACK_RPM_INSTALL_FILES + string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) + string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") + string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") + + set(CPACK_RPM_USER_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL) + string(REGEX REPLACE "%[A-Za-z0-9\(\),-]* " "" F_PATH ${F}) + string(REGEX MATCH "%[A-Za-z0-9\(\),-]*" F_PREFIX ${F}) + + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>") + endif() + if(F_PREFIX) + set(F_PREFIX "${F_PREFIX} ") + endif() + # Rebuild the user list file + set(CPACK_RPM_USER_INSTALL_FILES "${CPACK_RPM_USER_INSTALL_FILES}${F_PREFIX}\"${F_PATH}\"\n") + + # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL + list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH}) + # ABSOLUTE destination files list may not exists at all + if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH}) + endif() + + endforeach() + + # Rebuild CPACK_RPM_INSTALL_FILES + set(CPACK_RPM_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endforeach() + else() + set(CPACK_RPM_USER_INSTALL_FILES "") + endif() + + if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}") + endif() + # Remove trailing space + string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) + # Transform endline separated - string into CMake List + string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") + # Remove unecessary quotes + string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") + # Remove ABSOLUTE install file from INSTALL FILE LIST + list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}) + # Rebuild INSTALL_FILES + set(CPACK_RPM_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endforeach() + # Build ABSOLUTE_INSTALL_FILES + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") + foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n") + endforeach() + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}") + message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}") endif() else() - set(CPACK_RPM_USER_FILELIST_INTERNAL "") - endif() -else() - if(CPACK_RPM_USER_FILELIST) - set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}") - else() - set(CPACK_RPM_USER_FILELIST_INTERNAL "") - endif() -endif() - -# Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL -# Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL -# or CPACK_RPM_INSTALL_FILES, -# hence it must be done before these auto-generated lists are processed. -if(CPACK_RPM_USER_FILELIST_INTERNAL) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") + # reset vars in order to avoid leakage of value(s) from one component to another + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") endif() - # Create CMake list from CPACK_RPM_INSTALL_FILES + + # Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir + # This is necessary to avoid duplicate files since rpmbuild do + # recursion on its own when encountering a pathname which is a directory + # which is not flagged as %dir string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") - - set(CPACK_RPM_USER_INSTALL_FILES "") - foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL) - string(REGEX REPLACE "%[A-Za-z0-9\(\),-]* " "" F_PATH ${F}) - string(REGEX MATCH "%[A-Za-z0-9\(\),-]*" F_PREFIX ${F}) - - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>") - endif() - if(F_PREFIX) - set(F_PREFIX "${F_PREFIX} ") - endif() - # Rebuild the user list file - set(CPACK_RPM_USER_INSTALL_FILES "${CPACK_RPM_USER_INSTALL_FILES}${F_PREFIX}\"${F_PATH}\"\n") - - # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL - list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH}) - # ABSOLUTE destination files list may not exists at all - if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) - list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH}) - endif() - - endforeach() - - # Rebuild CPACK_RPM_INSTALL_FILES set(CPACK_RPM_INSTALL_FILES "") foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) - set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + if(IS_DIRECTORY "${WDIR}/${F}") + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}%dir \"${F}\"\n") + else() + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endif() endforeach() -else() - set(CPACK_RPM_USER_INSTALL_FILES "") -endif() + set(CPACK_RPM_INSTALL_FILES_LIST "") -if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + # The name of the final spec file to be used by rpmbuild + set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.spec") + + # Print out some debug information if we were asked for that if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}") + message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}") + message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}") + message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}") + message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}") + message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}") + message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}") + message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}") + message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}") + message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}") endif() - # Remove trailing space - string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) - # Transform endline separated - string into CMake List - string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") - # Remove unecessary quotes - string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") - # Remove ABSOLUTE install file from INSTALL FILE LIST - list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}) - # Rebuild INSTALL_FILES - set(CPACK_RPM_INSTALL_FILES "") - foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) - set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") - endforeach() - # Build ABSOLUTE_INSTALL_FILES - set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") - foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) - set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n") - endforeach() - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}") - message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}") + + # + # USER generated/provided spec file handling. + # + + # We can have a component specific spec file. + if(CPACK_RPM_PACKAGE_COMPONENT AND CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE) + set(CPACK_RPM_USER_BINARY_SPECFILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE}) endif() -else() - # reset vars in order to avoid leakage of value(s) from one component to another - set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") -endif() -# Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir -# This is necessary to avoid duplicate files since rpmbuild do -# recursion on its own when encountering a pathname which is a directory -# which is not flagged as %dir -string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) -string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST - "${CPACK_RPM_INSTALL_FILES_LIST}") -string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST - "${CPACK_RPM_INSTALL_FILES_LIST}") -set(CPACK_RPM_INSTALL_FILES "") -foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) - if(IS_DIRECTORY "${WDIR}/${F}") - set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}%dir \"${F}\"\n") - else() - set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") - endif() -endforeach() -set(CPACK_RPM_INSTALL_FILES_LIST "") - -# The name of the final spec file to be used by rpmbuild -set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.spec") - -# Print out some debug information if we were asked for that -if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}") - message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}") - message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}") - message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}") - message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}") - message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}") - message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}") - message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}") - message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}") -endif() - -# -# USER generated/provided spec file handling. -# - -# We can have a component specific spec file. -if(CPACK_RPM_PACKAGE_COMPONENT AND CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE) - set(CPACK_RPM_USER_BINARY_SPECFILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE}) -endif() - -# We should generate a USER spec file template: -# - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE -# - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE -if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) - file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in + # We should generate a USER spec file template: + # - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE + # - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE + if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) + file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in "# -*- rpm-spec -*- BuildRoot: \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@ Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ @@ -1271,63 +1249,54 @@ mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT %changelog \@CPACK_RPM_SPEC_CHANGELOG\@ ") - # Stop here if we were asked to only generate a template USER spec file - # The generated file may then be used as a template by user who wants - # to customize their own spec file. - if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE) - message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in") + # Stop here if we were asked to only generate a template USER spec file + # The generated file may then be used as a template by user who wants + # to customize their own spec file. + if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE) + message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in") + endif() endif() -endif() -# After that we may either use a user provided spec file -# or generate one using appropriate variables value. -if(CPACK_RPM_USER_BINARY_SPECFILE) - # User may have specified SPECFILE just use it - message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}") - # The user provided file is processed for @var replacement - configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY) -else() - # No User specified spec file, will use the generated spec file - message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}") - # Note the just created file is processed for @var replacement - configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY) -endif() - -if(RPMBUILD_EXECUTABLE) - # Now call rpmbuild using the SPECFILE - execute_process( - COMMAND "${RPMBUILD_EXECUTABLE}" -bb - --define "_topdir ${CPACK_RPM_DIRECTORY}" - --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" - --target "${_CPACK_RPM_PACKAGE_ARCHITECTURE}" - "${CPACK_RPM_BINARY_SPECFILE}" - WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" - RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT - ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err" - OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") - if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT) - file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err RPMBUILDERR) - file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out RPMBUILDOUT) - message("CPackRPM:Debug: You may consult rpmbuild logs in: ") - message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err") - message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") - message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") - message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") + # After that we may either use a user provided spec file + # or generate one using appropriate variables value. + if(CPACK_RPM_USER_BINARY_SPECFILE) + # User may have specified SPECFILE just use it + message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}") + # The user provided file is processed for @var replacement + configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY) + else() + # No User specified spec file, will use the generated spec file + message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}") + # Note the just created file is processed for @var replacement + configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY) endif() -else() - if(ALIEN_EXECUTABLE) - message(FATAL_ERROR "RPM packaging through alien not done (yet)") - endif() -endif() -# reset variables from temporary variables -if(CPACK_RPM_PACKAGE_SUMMARY_) - set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_}) -else() - unset(CPACK_RPM_PACKAGE_SUMMARY) -endif() -if(CPACK_RPM_PACKAGE_DESCRIPTION_) - set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_}) -else() - unset(CPACK_RPM_PACKAGE_DESCRIPTION) -endif() + if(RPMBUILD_EXECUTABLE) + # Now call rpmbuild using the SPECFILE + execute_process( + COMMAND "${RPMBUILD_EXECUTABLE}" -bb + --define "_topdir ${CPACK_RPM_DIRECTORY}" + --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" + --target "${_CPACK_RPM_PACKAGE_ARCHITECTURE}" + "${CPACK_RPM_BINARY_SPECFILE}" + WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" + RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT + ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err" + OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") + if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT) + file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err RPMBUILDERR) + file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out RPMBUILDOUT) + message("CPackRPM:Debug: You may consult rpmbuild logs in: ") + message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err") + message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") + message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") + message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") + endif() + else() + if(ALIEN_EXECUTABLE) + message(FATAL_ERROR "RPM packaging through alien not done (yet)") + endif() + endif() +endfunction() + +cpack_rpm_generate_package()