KWSys: Require at least CMake 2.6.3

Remove code left for supporting earlier CMake versions.

Source/kwsys/CMakeLists.txt

@@ -1,6 +1,6 @@
 #=============================================================================
 # KWSys - Kitware System Library
-# Copyright 2000-2009 Kitware, Inc., Insight Software Consortium
+# Copyright 2000-2011 Kitware, Inc., Insight Software Consortium
 #
 # Distributed under the OSI-approved BSD License (the "License");
 # see accompanying file Copyright.txt for details.
@@ -44,9 +44,7 @@
 #      SET(KWSYS_IOS_FORCE_OLD 1)
 #
 #
-# Optional settings to setup install rules work in one of two ways.
+# Optional settings to setup install rules are as follows:
-# The modern way utilizes the CMake 2.4 INSTALL command.  Settings
-# for this mode are as follows:
 #
 #  KWSYS_INSTALL_BIN_DIR     = The installation target directories into
 #  KWSYS_INSTALL_LIB_DIR       which the libraries and headers from
@@ -70,25 +68,6 @@
 #      SET(KWSYS_INSTALL_INCLUDE_DIR include)
 #      SET(KWSYS_INSTALL_COMPONENT_NAME_RUNTIME Runtime)
 #      SET(KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT Development)
-#
-# The old way uses the original CMake INSTALL_* commands.  Settings
-# for this mode are as follows:
-#
-#  KWSYS_LIBRARY_INSTALL_DIR = The installation target directories into
-#  KWSYS_HEADER_INSTALL_DIR    which the libraries and headers from
-#                              kwsys should be installed by a "make install".
-#                              The values should be specified relative to
-#                              the installation prefix and start with a '/'.
-#    Example:
-#
-#      SET(KWSYS_LIBRARY_INSTALL_DIR /lib)
-#      SET(KWSYS_HEADER_INSTALL_DIR /include)
-#
-# The modern way will be used whenever the INSTALL command is
-# available.  If the settings are not available the old names will be
-# used to construct them.  The old way will be used whenever the
-# INSTALL command is not available.  If the settings are not available
-# the new names will be used to construct them.
 
 # Once configured, kwsys should be used as follows from C or C++ code:
 #
@@ -105,13 +84,7 @@
 # any outside mailing list and no documentation of the change will be
 # written.
 
-CMAKE_MINIMUM_REQUIRED(VERSION 2.4.5 FATAL_ERROR)
+CMAKE_MINIMUM_REQUIRED(VERSION 2.6.3 FATAL_ERROR)
-IF(COMMAND CMAKE_POLICY)
-  CMAKE_POLICY(SET CMP0003 NEW)
-ENDIF(COMMAND CMAKE_POLICY)
-
-# Allow empty endif() and such with CMake 2.4.
-SET(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS 1)
 
 #-----------------------------------------------------------------------------
 # If a namespace is not specified, use "kwsys" and enable testing.
@@ -126,23 +99,11 @@ ENDIF(NOT KWSYS_NAMESPACE)
 # The project name is that of the specified namespace.
 PROJECT(${KWSYS_NAMESPACE})
 
-# Some properties we set only with CMake 2.6 and above.
-IF(COMMAND SET_PROPERTY)
-  MACRO(KWSYS_SET_PROPERTY)
-    SET_PROPERTY(${ARGV})
-  ENDMACRO(KWSYS_SET_PROPERTY)
-ELSE(COMMAND SET_PROPERTY)
-  MACRO(KWSYS_SET_PROPERTY)
-  ENDMACRO(KWSYS_SET_PROPERTY)
-ENDIF(COMMAND SET_PROPERTY)
-
 # Tell CMake how to follow dependencies of sources in this directory.
-IF(COMMAND SET_PROPERTY)
 SET_PROPERTY(DIRECTORY
   PROPERTY IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
   "KWSYS_HEADER(%)=<${KWSYS_NAMESPACE}/%>"
   )
-ENDIF(COMMAND SET_PROPERTY)
 
 # Select library components.
 IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
@@ -208,8 +169,6 @@ INCLUDE(CheckTypeSize)
 # Do full dependency headers.
 INCLUDE_REGULAR_EXPRESSION("^.*$")
 
-# Choose which kind of install commands to use.
-IF(COMMAND INSTALL)
 # Use new KWSYS_INSTALL_*_DIR variable names to control installation.
 # Take defaults from the old names.  Note that there was no old name
 # for the bin dir, so we take the old lib dir name so DLLs will be
@@ -276,30 +235,10 @@ IF(COMMAND INSTALL)
   ENDIF(KWSYS_INSTALL_COMPONENT_NAME_RUNTIME)
 ENDIF(KWSYS_INSTALL_BIN_DIR)
 
-  # Do not support old KWSYS_*_INSTALL_DIR variable names.
+# Do not support old KWSYS_*a_INSTALL_DIR variable names.
 SET(KWSYS_HEADER_INSTALL_DIR)
 SET(KWSYS_LIBRARY_INSTALL_DIR)
 
-ELSE(COMMAND INSTALL)
-  # Use old KWSYS_*_INSTALL_DIR variable names.
-  # Take defaults from the new names.
-  IF(KWSYS_INSTALL_LIB_DIR)
-    IF(NOT KWSYS_LIBRARY_INSTALL_DIR)
-      SET(KWSYS_LIBRARY_INSTALL_DIR "/${KWSYS_INSTALL_LIB_DIR}")
-    ENDIF(NOT KWSYS_LIBRARY_INSTALL_DIR)
-  ENDIF(KWSYS_INSTALL_LIB_DIR)
-  IF(KWSYS_INSTALL_INCLUDE_DIR)
-    IF(NOT KWSYS_HEADER_INSTALL_DIR)
-      SET(KWSYS_HEADER_INSTALL_DIR "/${KWSYS_INSTALL_INCLUDE_DIR}")
-    ENDIF(NOT KWSYS_HEADER_INSTALL_DIR)
-  ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
-
-  # Do not support new KWSYS_INSTALL_*_DIR variable names.
-  SET(KWSYS_INSTALL_BIN_DIR)
-  SET(KWSYS_INSTALL_INCLUDE_DIR)
-  SET(KWSYS_INSTALL_LIB_DIR)
-ENDIF(COMMAND INSTALL)
-
 # Generated source files will need this header.
 STRING(COMPARE EQUAL "${PROJECT_SOURCE_DIR}" "${PROJECT_BINARY_DIR}"
   KWSYS_IN_SOURCE_BUILD)
@@ -680,10 +619,6 @@ FOREACH(header
         DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}/stl
         ${KWSYS_INSTALL_INCLUDE_OPTIONS})
     ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
-    IF(KWSYS_HEADER_INSTALL_DIR)
-      INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}/stl
-        FILES ${KWSYS_HEADER_DIR}/stl/${header}.hxx)
-    ENDIF(KWSYS_HEADER_INSTALL_DIR)
   ELSE(KWSYS_STL_HEADER_EXTRA_${header})
     SET(KWSYS_STL_HEADER_EXTRA "")
   ENDIF(KWSYS_STL_HEADER_EXTRA_${header})
@@ -697,10 +632,6 @@ FOREACH(header
       DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}/stl
       ${KWSYS_INSTALL_INCLUDE_OPTIONS})
   ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
-  IF(KWSYS_HEADER_INSTALL_DIR)
-    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}/stl
-      FILES ${KWSYS_HEADER_DIR}/stl/${header})
-  ENDIF(KWSYS_HEADER_INSTALL_DIR)
 ENDFOREACH(header)
 
 # Provide cstddef header.
@@ -711,10 +642,6 @@ IF(KWSYS_INSTALL_INCLUDE_DIR)
   INSTALL(FILES ${KWSYS_HEADER_DIR}/cstddef
     DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}
     ${KWSYS_INSTALL_INCLUDE_OPTIONS})
-  IF(KWSYS_HEADER_INSTALL_DIR)
-    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}
-      FILES ${KWSYS_HEADER_DIR}/cstddef)
-  ENDIF(KWSYS_HEADER_INSTALL_DIR)
 ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
 
 #-----------------------------------------------------------------------------
@@ -732,10 +659,6 @@ FOREACH(header iostream fstream sstream iosfwd)
       DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}/ios
       ${KWSYS_INSTALL_INCLUDE_OPTIONS})
   ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
-  IF(KWSYS_HEADER_INSTALL_DIR)
-    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}/ios
-      FILES ${KWSYS_HEADER_DIR}/ios/${header})
-  ENDIF(KWSYS_HEADER_INSTALL_DIR)
 ENDFOREACH(header)
 
 #-----------------------------------------------------------------------------
@@ -824,10 +747,6 @@ FOREACH(c ${KWSYS_CLASSES})
       DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}
       ${KWSYS_INSTALL_INCLUDE_OPTIONS})
   ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
-  IF(KWSYS_HEADER_INSTALL_DIR)
-    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}
-                  FILES  ${KWSYS_HEADER_DIR}/${c}.hxx)
-  ENDIF(KWSYS_HEADER_INSTALL_DIR)
 ENDFOREACH(c)
 
 # Configure C headers.
@@ -843,10 +762,6 @@ FOREACH(h ${KWSYS_H_FILES})
       DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}
       ${KWSYS_INSTALL_INCLUDE_OPTIONS})
   ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
-  IF(KWSYS_HEADER_INSTALL_DIR)
-    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}
-                  FILES  ${KWSYS_HEADER_DIR}/${h}.h)
-  ENDIF(KWSYS_HEADER_INSTALL_DIR)
 ENDFOREACH(h)
 
 # Configure other C++ headers.
@@ -862,10 +777,6 @@ FOREACH(h ${KWSYS_HXX_FILES})
       DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}
       ${KWSYS_INSTALL_INCLUDE_OPTIONS})
   ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
-  IF(KWSYS_HEADER_INSTALL_DIR)
-    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}
-                  FILES  ${KWSYS_HEADER_DIR}/${h}.hxx)
-  ENDIF(KWSYS_HEADER_INSTALL_DIR)
 ENDFOREACH(h)
 
 #-----------------------------------------------------------------------------
@@ -873,7 +784,7 @@ ENDFOREACH(h)
 IF(KWSYS_C_SRCS OR KWSYS_CXX_SRCS)
   ADD_LIBRARY(${KWSYS_NAMESPACE} ${KWSYS_LIBRARY_TYPE}
     ${KWSYS_C_SRCS} ${KWSYS_CXX_SRCS})
-  KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE} PROPERTY LABELS ${KWSYS_LABELS_LIB})
+  SET_PROPERTY(TARGET ${KWSYS_NAMESPACE} PROPERTY LABELS ${KWSYS_LABELS_LIB})
   IF(KWSYS_USE_DynamicLoader)
     IF(UNIX)
       TARGET_LINK_LIBRARIES(${KWSYS_NAMESPACE} ${CMAKE_DL_LIBS})
@@ -895,15 +806,12 @@ IF(KWSYS_C_SRCS OR KWSYS_CXX_SRCS)
   IF(KWSYS_INSTALL_LIBRARY_RULE)
     INSTALL(TARGETS ${KWSYS_NAMESPACE} ${KWSYS_INSTALL_LIBRARY_RULE})
   ENDIF(KWSYS_INSTALL_LIBRARY_RULE)
-  IF(KWSYS_LIBRARY_INSTALL_DIR)
-    INSTALL_TARGETS(${KWSYS_LIBRARY_INSTALL_DIR} ${KWSYS_NAMESPACE})
-  ENDIF(KWSYS_LIBRARY_INSTALL_DIR)
 ENDIF(KWSYS_C_SRCS OR KWSYS_CXX_SRCS)
 
 # Add a C-only library if requested.
 IF(KWSYS_ENABLE_C AND KWSYS_C_SRCS)
   ADD_LIBRARY(${KWSYS_NAMESPACE}_c ${KWSYS_LIBRARY_TYPE} ${KWSYS_C_SRCS})
-  KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}_c PROPERTY LABELS ${KWSYS_LABELS_LIB})
+  SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}_c PROPERTY LABELS ${KWSYS_LABELS_LIB})
 
   # Apply user-defined target properties to the library.
   IF(KWSYS_PROPERTIES_C)
@@ -916,9 +824,6 @@ IF(KWSYS_ENABLE_C AND KWSYS_C_SRCS)
   IF(KWSYS_INSTALL_LIBRARY_RULE)
     INSTALL(TARGETS ${KWSYS_NAMESPACE}_c ${KWSYS_INSTALL_LIBRARY_RULE})
   ENDIF(KWSYS_INSTALL_LIBRARY_RULE)
-  IF(KWSYS_LIBRARY_INSTALL_DIR)
-    INSTALL_TARGETS(${KWSYS_LIBRARY_INSTALL_DIR} ${KWSYS_NAMESPACE}_c)
-  ENDIF(KWSYS_LIBRARY_INSTALL_DIR)
 ENDIF(KWSYS_ENABLE_C AND KWSYS_C_SRCS)
 
 # For building kwsys itself, we use a macro defined on the command
@@ -942,8 +847,8 @@ IF(KWSYS_USE_Process)
     # encode it into a C file.
     ADD_EXECUTABLE(${KWSYS_NAMESPACE}ProcessFwd9x ProcessFwd9x.c)
     ADD_EXECUTABLE(${KWSYS_NAMESPACE}EncodeExecutable EncodeExecutable.c)
-    KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}ProcessFwd9x PROPERTY LABELS ${KWSYS_LABELS_EXE})
+    SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}ProcessFwd9x PROPERTY LABELS ${KWSYS_LABELS_EXE})
-    KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}EncodeExecutable PROPERTY LABELS ${KWSYS_LABELS_EXE})
+    SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}EncodeExecutable PROPERTY LABELS ${KWSYS_LABELS_EXE})
 
     # Construct the location of the executable to be encoded.
     SET(BIN_DIR ${CMAKE_CURRENT_BINARY_DIR})
@@ -959,23 +864,12 @@ IF(KWSYS_USE_Process)
     # Take advantage of a better custom command syntax if possible.
     SET(CMD ${BIN_DIR}${CFG_INTDIR}/${KWSYS_NAMESPACE}EncodeExecutable.exe)
     SET(FWD ${BIN_DIR}${CFG_INTDIR}/${KWSYS_NAMESPACE}ProcessFwd9x.exe)
-    IF("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" GREATER 1.6)
     ADD_CUSTOM_COMMAND(
       OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
       COMMAND ${CMD}
       ARGS ${FWD} ${CMAKE_CURRENT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
            ${KWSYS_NAMESPACE} ProcessFwd9x
       DEPENDS ${CMD} ${FWD})
-    ELSE("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" GREATER 1.6)
-      ADD_CUSTOM_COMMAND(
-        TARGET ${KWSYS_NAMESPACE}
-        SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/ProcessFwd9x.c
-        COMMAND ${CMD}
-        ARGS ${FWD} ${CMAKE_CURRENT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
-             ${KWSYS_NAMESPACE} ProcessFwd9x
-        OUTPUTS ${CMAKE_CURRENT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
-        DEPENDS ${CMD} ${FWD})
-    ENDIF("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" GREATER 1.6)
 
     # Make sure build occurs in proper order.
     ADD_DEPENDENCIES(${KWSYS_NAMESPACE} ${KWSYS_NAMESPACE}ProcessFwd9x
@@ -998,19 +892,19 @@ IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
       testEncode
       testTerminal
       )
-    IF(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY AND KWSYS_STANDALONE)
+    IF(KWSYS_STANDALONE)
       SET(KWSYS_C_TESTS ${KWSYS_C_TESTS} testFail)
-    ENDIF(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY AND KWSYS_STANDALONE)
+    ENDIF()
     CREATE_TEST_SOURCELIST(
       KWSYS_C_TEST_SRCS ${KWSYS_NAMESPACE}TestsC.c
       ${KWSYS_C_TESTS}
       )
     ADD_EXECUTABLE(${KWSYS_NAMESPACE}TestsC ${KWSYS_C_TEST_SRCS})
-    KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestsC PROPERTY LABELS ${KWSYS_LABELS_EXE})
+    SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestsC PROPERTY LABELS ${KWSYS_LABELS_EXE})
     TARGET_LINK_LIBRARIES(${KWSYS_NAMESPACE}TestsC ${KWSYS_NAMESPACE}_c)
     FOREACH(test ${KWSYS_C_TESTS})
       ADD_TEST(kwsys.${test} ${EXEC_DIR}/${KWSYS_NAMESPACE}TestsC ${test} ${KWSYS_TEST_ARGS_${test}})
-      KWSYS_SET_PROPERTY(TEST kwsys.${test} PROPERTY LABELS ${KWSYS_LABELS_TEST})
+      SET_PROPERTY(TEST kwsys.${test} PROPERTY LABELS ${KWSYS_LABELS_TEST})
     ENDFOREACH(test)
 
     # C++ tests
@@ -1034,7 +928,7 @@ IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
       SET(KWSYS_CXX_TESTS ${KWSYS_CXX_TESTS} testDynamicLoader)
       # If kwsys contains the DynamicLoader, need extra library
       ADD_LIBRARY(${KWSYS_NAMESPACE}TestDynload MODULE testDynload.c)
-      KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestDynload PROPERTY LABELS ${KWSYS_LABELS_LIB})
+      SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestDynload PROPERTY LABELS ${KWSYS_LABELS_LIB})
       ADD_DEPENDENCIES(${KWSYS_NAMESPACE}TestDynload ${KWSYS_NAMESPACE})
     ENDIF(KWSYS_USE_DynamicLoader)
     CREATE_TEST_SOURCELIST(
@@ -1042,7 +936,7 @@ IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
       ${KWSYS_CXX_TESTS}
       )
     ADD_EXECUTABLE(${KWSYS_NAMESPACE}TestsCxx ${KWSYS_CXX_TEST_SRCS})
-    KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestsCxx PROPERTY LABELS ${KWSYS_LABELS_EXE})
+    SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestsCxx PROPERTY LABELS ${KWSYS_LABELS_EXE})
     TARGET_LINK_LIBRARIES(${KWSYS_NAMESPACE}TestsCxx ${KWSYS_NAMESPACE})
     SET(TEST_SYSTEMTOOLS_BIN_FILE
       "${CMAKE_CURRENT_SOURCE_DIR}/testSystemTools.bin")
@@ -1089,19 +983,19 @@ IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
       )
     FOREACH(test ${KWSYS_CXX_TESTS})
       ADD_TEST(kwsys.${test} ${EXEC_DIR}/${KWSYS_NAMESPACE}TestsCxx ${test} ${KWSYS_TEST_ARGS_${test}})
-      KWSYS_SET_PROPERTY(TEST kwsys.${test} PROPERTY LABELS ${KWSYS_LABELS_TEST})
+      SET_PROPERTY(TEST kwsys.${test} PROPERTY LABELS ${KWSYS_LABELS_TEST})
     ENDFOREACH(test)
 
     # Process tests.
     ADD_EXECUTABLE(${KWSYS_NAMESPACE}TestProcess testProcess.c)
-    KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestProcess PROPERTY LABELS ${KWSYS_LABELS_EXE})
+    SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestProcess PROPERTY LABELS ${KWSYS_LABELS_EXE})
     TARGET_LINK_LIBRARIES(${KWSYS_NAMESPACE}TestProcess ${KWSYS_NAMESPACE}_c)
     IF(NOT CYGWIN)
       SET(KWSYS_TEST_PROCESS_7 7)
     ENDIF(NOT CYGWIN)
     FOREACH(n 1 2 3 4 5 6 ${KWSYS_TEST_PROCESS_7})
       ADD_TEST(kwsys.testProcess-${n} ${EXEC_DIR}/${KWSYS_NAMESPACE}TestProcess ${n})
-      KWSYS_SET_PROPERTY(TEST kwsys.testProcess-${n} PROPERTY LABELS ${KWSYS_LABELS_TEST})
+      SET_PROPERTY(TEST kwsys.testProcess-${n} PROPERTY LABELS ${KWSYS_LABELS_TEST})
       SET_TESTS_PROPERTIES(kwsys.testProcess-${n} PROPERTIES TIMEOUT 120)
     ENDFOREACH(n)
 
@@ -1115,13 +1009,13 @@ IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
                    ${PROJECT_BINARY_DIR}/testSharedForward.c @ONLY IMMEDIATE)
     ADD_EXECUTABLE(${KWSYS_NAMESPACE}TestSharedForward
                    ${PROJECT_BINARY_DIR}/testSharedForward.c)
-    KWSYS_SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestSharedForward PROPERTY LABELS ${KWSYS_LABELS_EXE})
+    SET_PROPERTY(TARGET ${KWSYS_NAMESPACE}TestSharedForward PROPERTY LABELS ${KWSYS_LABELS_EXE})
     ADD_DEPENDENCIES(${KWSYS_NAMESPACE}TestSharedForward ${KWSYS_NAMESPACE}_c)
     ADD_TEST(kwsys.testSharedForward ${EXEC_DIR}/${KWSYS_NAMESPACE}TestSharedForward 1)
-    KWSYS_SET_PROPERTY(TEST kwsys.testSharedForward PROPERTY LABELS ${KWSYS_LABELS_TEST})
+    SET_PROPERTY(TEST kwsys.testSharedForward PROPERTY LABELS ${KWSYS_LABELS_TEST})
 
     # Configure some test properties.
-    IF(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY AND KWSYS_STANDALONE)
+    IF(KWSYS_STANDALONE)
       # We expect test to fail
       SET_TESTS_PROPERTIES(kwsys.testFail PROPERTIES WILL_FAIL ON)
       GET_TEST_PROPERTY(kwsys.testFail WILL_FAIL wfv)
@@ -1129,7 +1023,7 @@ IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
       SET_TESTS_PROPERTIES(kwsys.testRegistry PROPERTIES PASS_REGULAR_EXPRESSION "Test passed")
       SET_TESTS_PROPERTIES(kwsys.testFail PROPERTIES MEASUREMENT "Some Key=Some Value")
       MESSAGE(STATUS "GET_TEST_PROPERTY returned: ${wfv}")
-    ENDIF(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY AND KWSYS_STANDALONE)
+    ENDIF()
 
     # Suppress known consistent failures on buggy systems.
     IF(KWSYS_TEST_BOGUS_FAILURES)