kolan
/
CMake
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
CMake/Tests/TryCompile/CMakeLists.txt

299 lines
10 KiB
CMake
Raw Normal View History

ENH: preclean some warnings
2008-03-25 18:27:18 +03:00
cmake_minimum_required (VERSION 2.6)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
project(TryCompile)
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(TEST_ASSERT value msg)
if (NOT ${value})
message (SEND_ERROR "Assertion failure:" ${msg} )
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif ()
endmacro()
ENH: add tests for check_c_source_runs(), check_cxx_source_runs(), check_c_source_compiles() and check_cxx_source_compiles() -TRY_RUN in crosscompiling mode: copy the created executables to CMAKE_BINARY_DIR so the user can run them manually on the target Alex
2007-07-31 22:52:01 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(TEST_FAIL value msg)
if (${value})
message (SEND_ERROR "Failing test succeeded:" ${msg} )
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif ()
endmacro()
ENH: add tests for check_c_source_runs(), check_cxx_source_runs(), check_c_source_compiles() and check_cxx_source_compiles() -TRY_RUN in crosscompiling mode: copy the created executables to CMAKE_BINARY_DIR so the user can run them manually on the target Alex
2007-07-31 22:52:01 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(TEST_EXPECT_EXACT command expected)
if(NOT "x${result}" STREQUAL "x${expected}")
message(SEND_ERROR "${CMAKE_CURRENT_LIST_LINE}: TEST \"${command}\" failed: \"${result}\" expected: \"${expected}\"")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endmacro()
ENH: add tests for check_c_source_runs(), check_cxx_source_runs(), check_c_source_compiles() and check_cxx_source_compiles() -TRY_RUN in crosscompiling mode: copy the created executables to CMAKE_BINARY_DIR so the user can run them manually on the target Alex
2007-07-31 22:52:01 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(TEST_EXPECT_CONTAINS command expected)
if(NOT "${result}" MATCHES "${expected}")
message(SEND_ERROR "${CMAKE_CURRENT_LIST_LINE}: TEST \"${command}\" failed: \"${result}\" expected: \"${expected}\"")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endmacro()
ENH: add tests for check_c_source_runs(), check_cxx_source_runs(), check_c_source_compiles() and check_cxx_source_compiles() -TRY_RUN in crosscompiling mode: copy the created executables to CMAKE_BINARY_DIR so the user can run them manually on the target Alex
2007-07-31 22:52:01 +04:00
ENH: add a test for bug 7316
2008-07-15 18:04:01 +04:00
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
# try to compile a file that should compile
ENH: add COPY_FILE argument to TRY_COMPILE, so the compiled executable can be used e.g. for getting strings out of it. Alex
2007-05-24 20:06:59 +04:00
# also check that COPY_FILE works
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_compile(SHOULD_PASS
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
ENH: add a new test for TRY_COMPILE
2003-02-11 00:20:10 +03:00
${TryCompile_SOURCE_DIR}/pass.c
ENH: add COPY_FILE argument to TRY_COMPILE, so the compiled executable can be used e.g. for getting strings out of it. Alex
2007-05-24 20:06:59 +04:00
OUTPUT_VARIABLE TRY_OUT
COPY_FILE ${TryCompile_BINARY_DIR}/CopyOfPass
)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT SHOULD_PASS)
message(SEND_ERROR "should pass failed ${TRY_OUT}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT EXISTS "${TryCompile_BINARY_DIR}/CopyOfPass")
message(SEND_ERROR "COPY_FILE to \"${TryCompile_BINARY_DIR}/CopyOfPass\" failed")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
file(REMOVE "${TryCompile_BINARY_DIR}/CopyOfPass")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
try_compile: Add COPY_FILE_ERROR option to capture failure When the COPY_FILE operation fails optionally capture the error message with a COPY_FILE_ERROR option instead of reporting the error immediately. This gives callers a chance to do something else or report the error. Teach the RunCMake.try_compile test to cover bad argument combinations involving COPY_FILE_ERROR. Teach the TryCompile test to cover the case of a COPY_FILE error message captured by COPY_FILE_ERROR.
2013-07-09 23:26:15 +04:00
# try to compile a file that should compile
# also check that COPY_FILE_ERROR works
file(WRITE ${TryCompile_BINARY_DIR}/invalid "")
try_compile(SHOULD_PASS
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
${TryCompile_SOURCE_DIR}/pass.c
OUTPUT_VARIABLE TRY_OUT
COPY_FILE ${TryCompile_BINARY_DIR}/invalid/path
COPY_FILE_ERROR _captured
)
if(NOT SHOULD_PASS)
message(SEND_ERROR "should pass failed ${TRY_OUT}")
endif()
if(NOT _captured MATCHES "Cannot copy output executable.*/invalid/path")
message(SEND_ERROR "COPY_FILE_ERROR did not capture expected message")
endif()
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
# try to compile a file that should not compile
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_compile(SHOULD_FAIL
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
ENH: add a new test for TRY_COMPILE
2003-02-11 00:20:10 +03:00
${TryCompile_SOURCE_DIR}/fail.c
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
OUTPUT_VARIABLE TRY_OUT)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(SHOULD_FAIL)
message(SEND_ERROR "Should fail passed ${TRY_OUT}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
# try to compile a file that should compile
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_compile(SHOULD_PASS
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
ENH: add a new test for TRY_COMPILE
2003-02-11 00:20:10 +03:00
${TryCompile_SOURCE_DIR}/pass.c
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
OUTPUT_VARIABLE TRY_OUT)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT SHOULD_PASS)
message(SEND_ERROR "should pass failed ${TRY_OUT}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
# try to compile a file that should not compile
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_compile(SHOULD_FAIL
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
ENH: add a new test for TRY_COMPILE
2003-02-11 00:20:10 +03:00
${TryCompile_SOURCE_DIR}/fail.c
ENH: add a new test to test try compile
2003-02-10 21:19:34 +03:00
OUTPUT_VARIABLE TRY_OUT)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(SHOULD_FAIL)
message(SEND_ERROR "Should fail passed ${TRY_OUT}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_compile: Add signature to allow multiple SOURCES Extend the signature try_compile(RESULT_VAR <bindir> <srcfile> ...) to allow multiple sources as try_compile(RESULT_VAR <bindir> SOURCES <srcfile>... ...) Process the sources to generate a CMakeLists.txt that enables all needed languages. Teach the TryCompile test to try cases with two sources of the same language and of mixed languages. Teach RunCMake.try_compile to cover error cases for the signature.
2013-06-06 21:54:44 +04:00
# try to compile two files that should compile
try_compile(SHOULD_PASS
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
SOURCES ${TryCompile_SOURCE_DIR}/pass2a.c ${TryCompile_SOURCE_DIR}/pass2b.cxx
OUTPUT_VARIABLE TRY_OUT)
if(NOT SHOULD_PASS)
message(SEND_ERROR "should pass failed ${TRY_OUT}")
endif()
# try to compile two files that should not compile
try_compile(SHOULD_FAIL
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
SOURCES ${TryCompile_SOURCE_DIR}/fail2a.c ${TryCompile_SOURCE_DIR}/fail2b.c
OUTPUT_VARIABLE TRY_OUT)
if(SHOULD_FAIL)
message(SEND_ERROR "Should fail passed ${TRY_OUT}")
endif()
try_compile: Escape CMAKE_<lang>_FLAGS in test projects (#14268) If CMAKE_<lang>_FLAGS contains quotes or other CMake language characters they must be escaped when written into the generated CMakeLists.txt file so that the test project parses them properly. Teach the TryCompile test to cover this case by adding a flag with quotes into CMAKE_C_FLAGS during a C language try_compile.
2013-07-03 23:57:02 +04:00
# try to compile a file that should compile
set(_c_flags "${CMAKE_C_FLAGS}")
Drop Visual Studio 6 generator This generator has been deprecated since CMake 3.3. Remove it. Update documentation, modules, and tests to drop content specific to this generator.
2016-03-09 17:42:18 +03:00
if(WATCOM)
try_compile: Escape CMAKE_<lang>_FLAGS in test projects (#14268) If CMAKE_<lang>_FLAGS contains quotes or other CMake language characters they must be escaped when written into the generated CMakeLists.txt file so that the test project parses them properly. Teach the TryCompile test to cover this case by adding a flag with quotes into CMAKE_C_FLAGS during a C language try_compile.
2013-07-03 23:57:02 +04:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -dTESTDEF")
else()
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} \"-DTESTDEF\"")
endif()
try_compile(SHOULD_PASS
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
${TryCompile_SOURCE_DIR}/testdef.c
OUTPUT_VARIABLE TRY_OUT)
if(NOT SHOULD_PASS)
message(SEND_ERROR "should pass failed ${TRY_OUT}")
endif()
set(CMAKE_C_FLAGS "${_c_flags}")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT SHOULD_FAIL)
if(SHOULD_PASS)
message("All Tests passed, ignore all previous output.")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("Test failed")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("Test failed")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_compile(CMAKE_ANSI_FOR_SCOPE
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
ENH: add more testing for ansi for scopes
2003-02-11 06:00:40 +03:00
${CMAKE_ROOT}/Modules/TestForAnsiForScope.cxx OUTPUT_VARIABLE OUT)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if (CMAKE_ANSI_FOR_SCOPE)
message("Compiler supports ansi for")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("Compiler does not support ansi for scope")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: add more testing for ansi for scopes
2003-02-11 06:00:40 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_compile(CMAKE_ANSI_FOR_SCOPE
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
ENH: add more testing for ansi for scopes
2003-02-11 06:00:40 +03:00
${CMAKE_ROOT}/Modules/TestForAnsiForScope.cxx OUTPUT_VARIABLE OUT)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if (CMAKE_ANSI_FOR_SCOPE)
message("Compiler supports ansi for")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("Compiler does not support ansi for scope")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("use the module now")
include(${CMAKE_ROOT}/Modules/TestForANSIForScope.cmake)
if (CMAKE_ANSI_FOR_SCOPE)
message("Compiler supports ansi for")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("Compiler does not support ansi for scope")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("Testing try_compile project mode")
try_compile(TEST_INNER
Test try_compile project mode The try_compile command project mode builds an entire source tree instead of one source file. It uses an existing CMakeLists.txt file in the given source tree instead of generating one. This commit creates a test for the mode in the TryCompile test.
2009-08-03 21:37:28 +04:00
${TryCompile_BINARY_DIR}/CMakeFiles/Inner
${TryCompile_SOURCE_DIR}/Inner
No /fast targets in try_compile project mode The try_compile command builds the cmTryCompileExec executable using the cmTryCompileExec/fast target with Makefile generators in order to save time since dependencies are not needed. However, in project mode the command builds an entire source tree that may have dependencies. Therefore we can use the /fast target approach only in one-source mode.
2009-08-04 22:37:46 +04:00
TryCompileInner innerexe
OUTPUT_VARIABLE output)
TEST_ASSERT(TEST_INNER "try_compile project mode failed:\n${output}")
Test try_compile project mode The try_compile command project mode builds an entire source tree instead of one source file. It uses an existing CMakeLists.txt file in the given source tree instead of generating one. This commit creates a test for the mode in the TryCompile test.
2009-08-03 21:37:28 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_executable(TryCompile pass.c)
ENH: add two simple tests for TRY_RUN() STYLE: create a new base class cmCoreTryCompile, from which cmTryCompileCommand and cmTryRunCommand are derived, so there are no public static functions with lots of arguments anymore Alex
2007-05-24 19:27:51 +04:00
######################################
# now two tests for TRY_RUN
# try to run a file that should compile and run without error
ENH: improve TRY_RUN() for crosscompiling: instead of just failing, it now creates two cache variables, one for the RUN_RESULT, one for the RUN_OUTPUT (if required), which can be set or preset by the user. It has now also two new arguments: RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE (the old OUTPUT_VARIABLE merges both), so if only COMPILE_OUTPUT_VARIABLE is used the run time output of the TRY_RUN is unused and the user doesn't have to care about the output when crosscompiling. This is now used in FindThreads.cmake, CheckC/CXXSourceRuns.cmake and TestBigEndian.cmake, which used the output only for the logfile (compile output is still there). Test/TryCompile/ now also tests the behaviour of OUTPUT_VARIABLE, RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE. Alex
2007-06-01 19:16:29 +04:00
# also check that OUTPUT_VARIABLE contains both the compile output
# and the run output
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_run(SHOULD_RUN SHOULD_COMPILE
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
ENH: add two simple tests for TRY_RUN() STYLE: create a new base class cmCoreTryCompile, from which cmTryCompileCommand and cmTryRunCommand are derived, so there are no public static functions with lots of arguments anymore Alex
2007-05-24 19:27:51 +04:00
${TryCompile_SOURCE_DIR}/exit_success.c
OUTPUT_VARIABLE TRY_OUT)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT SHOULD_COMPILE)
message(SEND_ERROR "exit_success failed compiling: ${TRY_OUT}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT "${SHOULD_RUN}" STREQUAL "0")
message(SEND_ERROR "exit_success failed running with exit code ${SHOULD_RUN}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: improve TRY_RUN() for crosscompiling: instead of just failing, it now creates two cache variables, one for the RUN_RESULT, one for the RUN_OUTPUT (if required), which can be set or preset by the user. It has now also two new arguments: RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE (the old OUTPUT_VARIABLE merges both), so if only COMPILE_OUTPUT_VARIABLE is used the run time output of the TRY_RUN is unused and the user doesn't have to care about the output when crosscompiling. This is now used in FindThreads.cmake, CheckC/CXXSourceRuns.cmake and TestBigEndian.cmake, which used the output only for the logfile (compile output is still there). Test/TryCompile/ now also tests the behaviour of OUTPUT_VARIABLE, RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE. Alex
2007-06-01 19:16:29 +04:00
# check the compile output for the filename
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT "${TRY_OUT}" MATCHES "exit_success")
message(SEND_ERROR " TRY_OUT didn't contain \"exit_success\": \"${TRY_OUT}\"")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: improve TRY_RUN() for crosscompiling: instead of just failing, it now creates two cache variables, one for the RUN_RESULT, one for the RUN_OUTPUT (if required), which can be set or preset by the user. It has now also two new arguments: RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE (the old OUTPUT_VARIABLE merges both), so if only COMPILE_OUTPUT_VARIABLE is used the run time output of the TRY_RUN is unused and the user doesn't have to care about the output when crosscompiling. This is now used in FindThreads.cmake, CheckC/CXXSourceRuns.cmake and TestBigEndian.cmake, which used the output only for the logfile (compile output is still there). Test/TryCompile/ now also tests the behaviour of OUTPUT_VARIABLE, RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE. Alex
2007-06-01 19:16:29 +04:00
# check the run output
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT "${TRY_OUT}" MATCHES "hello world")
message(SEND_ERROR " TRY_OUT didn't contain \"hello world\": \"${TRY_OUT}\"")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: improve TRY_RUN() for crosscompiling: instead of just failing, it now creates two cache variables, one for the RUN_RESULT, one for the RUN_OUTPUT (if required), which can be set or preset by the user. It has now also two new arguments: RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE (the old OUTPUT_VARIABLE merges both), so if only COMPILE_OUTPUT_VARIABLE is used the run time output of the TRY_RUN is unused and the user doesn't have to care about the output when crosscompiling. This is now used in FindThreads.cmake, CheckC/CXXSourceRuns.cmake and TestBigEndian.cmake, which used the output only for the logfile (compile output is still there). Test/TryCompile/ now also tests the behaviour of OUTPUT_VARIABLE, RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE. Alex
2007-06-01 19:16:29 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_run(ARG_TEST_RUN ARG_TEST_COMPILE
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
Add more coverage and use the ARGS option of try_run
2009-10-29 06:29:13 +03:00
${TryCompile_SOURCE_DIR}/expect_arg.c
OUTPUT_VARIABLE TRY_OUT
ARGS arg1 arg2)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT ARG_TEST_COMPILE)
message(SEND_ERROR "expect_arg failed compiling: ${TRY_OUT}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT "${ARG_TEST_RUN}" STREQUAL "0")
message(SEND_ERROR "expect_arg failed running with exit code ${ARG_TEST_RUN} ${TRY_OUT}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: add two simple tests for TRY_RUN() STYLE: create a new base class cmCoreTryCompile, from which cmTryCompileCommand and cmTryRunCommand are derived, so there are no public static functions with lots of arguments anymore Alex
2007-05-24 19:27:51 +04:00
# try to run a file that should compile and run, but return an error
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
try_run(SHOULD_EXIT_WITH_ERROR SHOULD_COMPILE
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
${TryCompile_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp
ENH: add two simple tests for TRY_RUN() STYLE: create a new base class cmCoreTryCompile, from which cmTryCompileCommand and cmTryRunCommand are derived, so there are no public static functions with lots of arguments anymore Alex
2007-05-24 19:27:51 +04:00
${TryCompile_SOURCE_DIR}/exit_with_error.c
ENH: improve TRY_RUN() for crosscompiling: instead of just failing, it now creates two cache variables, one for the RUN_RESULT, one for the RUN_OUTPUT (if required), which can be set or preset by the user. It has now also two new arguments: RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE (the old OUTPUT_VARIABLE merges both), so if only COMPILE_OUTPUT_VARIABLE is used the run time output of the TRY_RUN is unused and the user doesn't have to care about the output when crosscompiling. This is now used in FindThreads.cmake, CheckC/CXXSourceRuns.cmake and TestBigEndian.cmake, which used the output only for the logfile (compile output is still there). Test/TryCompile/ now also tests the behaviour of OUTPUT_VARIABLE, RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE. Alex
2007-06-01 19:16:29 +04:00
COMPILE_OUTPUT_VARIABLE COMPILE_OUTPUT
RUN_OUTPUT_VARIABLE RUN_OUTPUT)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT SHOULD_COMPILE)
message(STATUS " exit_with_error failed compiling: ${COMPILE_OUTPUT}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if("${SHOULD_EXIT_WITH_ERROR}" STREQUAL "0")
message(SEND_ERROR " exit_with_error passed with exit code ${SHOULD_EXIT_WITH_ERROR}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: add two simple tests for TRY_RUN() STYLE: create a new base class cmCoreTryCompile, from which cmTryCompileCommand and cmTryRunCommand are derived, so there are no public static functions with lots of arguments anymore Alex
2007-05-24 19:27:51 +04:00
ENH: improve TRY_RUN() for crosscompiling: instead of just failing, it now creates two cache variables, one for the RUN_RESULT, one for the RUN_OUTPUT (if required), which can be set or preset by the user. It has now also two new arguments: RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE (the old OUTPUT_VARIABLE merges both), so if only COMPILE_OUTPUT_VARIABLE is used the run time output of the TRY_RUN is unused and the user doesn't have to care about the output when crosscompiling. This is now used in FindThreads.cmake, CheckC/CXXSourceRuns.cmake and TestBigEndian.cmake, which used the output only for the logfile (compile output is still there). Test/TryCompile/ now also tests the behaviour of OUTPUT_VARIABLE, RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE. Alex
2007-06-01 19:16:29 +04:00
# check the compile output, it should contain the filename
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT "${COMPILE_OUTPUT}" MATCHES "exit_with_error")
message(SEND_ERROR " COMPILE_OUT didn't contain \"exit_with_error\": \"${COMPILE_OUTPUT}\"")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: improve TRY_RUN() for crosscompiling: instead of just failing, it now creates two cache variables, one for the RUN_RESULT, one for the RUN_OUTPUT (if required), which can be set or preset by the user. It has now also two new arguments: RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE (the old OUTPUT_VARIABLE merges both), so if only COMPILE_OUTPUT_VARIABLE is used the run time output of the TRY_RUN is unused and the user doesn't have to care about the output when crosscompiling. This is now used in FindThreads.cmake, CheckC/CXXSourceRuns.cmake and TestBigEndian.cmake, which used the output only for the logfile (compile output is still there). Test/TryCompile/ now also tests the behaviour of OUTPUT_VARIABLE, RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE. Alex
2007-06-01 19:16:29 +04:00
#... but not the run time output
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if("${COMPILE_OUTPUT}" MATCHES "hello world")
message(SEND_ERROR " COMPILE_OUT contains the run output: \"${COMPILE_OUTPUT}\"")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: improve TRY_RUN() for crosscompiling: instead of just failing, it now creates two cache variables, one for the RUN_RESULT, one for the RUN_OUTPUT (if required), which can be set or preset by the user. It has now also two new arguments: RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE (the old OUTPUT_VARIABLE merges both), so if only COMPILE_OUTPUT_VARIABLE is used the run time output of the TRY_RUN is unused and the user doesn't have to care about the output when crosscompiling. This is now used in FindThreads.cmake, CheckC/CXXSourceRuns.cmake and TestBigEndian.cmake, which used the output only for the logfile (compile output is still there). Test/TryCompile/ now also tests the behaviour of OUTPUT_VARIABLE, RUN_OUTPUT_VARIABLE and COMPILE_OUTPUT_VARIABLE. Alex
2007-06-01 19:16:29 +04:00
# check the run output, it should stdout
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT "${RUN_OUTPUT}" MATCHES "hello world")
message(SEND_ERROR " RUN_OUTPUT didn't contain \"hello world\": \"${RUN_OUTPUT}\"")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: add tests for check_c_source_runs(), check_cxx_source_runs(), check_c_source_compiles() and check_cxx_source_compiles() -TRY_RUN in crosscompiling mode: copy the created executables to CMAKE_BINARY_DIR so the user can run them manually on the target Alex
2007-07-31 22:52:01 +04:00
#######################################################################
#
# also test that the CHECK_C_SOURCE_COMPILES, CHECK_CXX_SOURCE_COMPILES
# CHECK_C_SOURCE_RUNS and CHECK_CXX_SOURCE_RUNS macros work
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include(CheckCSourceCompiles)
include(CheckCXXSourceCompiles)
include(CheckCSourceRuns)
include(CheckCXXSourceRuns)
ENH: add tests for check_c_source_runs(), check_cxx_source_runs(), check_c_source_compiles() and check_cxx_source_compiles() -TRY_RUN in crosscompiling mode: copy the created executables to CMAKE_BINARY_DIR so the user can run them manually on the target Alex
2007-07-31 22:52:01 +04:00
CHECK_C_SOURCE_COMPILES("I dont build" C_BUILD_SHOULD_FAIL)
CHECK_C_SOURCE_COMPILES("int main() {return 0;}" C_BUILD_SHOULD_WORK)
CHECK_C_SOURCE_RUNS("int main() {return 1;}" C_RUN_SHOULD_FAIL)
CHECK_C_SOURCE_RUNS("int main() {return 0;}" C_RUN_SHOULD_WORK)
TEST_FAIL(C_BUILD_SHOULD_FAIL "CHECK_C_SOURCE_COMPILES() succeeded, but should have failed")
TEST_ASSERT(C_BUILD_SHOULD_WORK "CHECK_C_SOURCE_COMPILES() failed")
TEST_FAIL(C_RUN_SHOULD_FAIL "CHECK_C_SOURCE_RUNS() succeeded, but should have failed")
TEST_ASSERT(C_RUN_SHOULD_WORK "CHECK_C_SOURCE_RUNS() failed")
CHECK_CXX_SOURCE_COMPILES("I dont build" CXX_BUILD_SHOULD_FAIL)
CHECK_CXX_SOURCE_COMPILES("int main() {return 0;}" CXX_BUILD_SHOULD_WORK)
CHECK_CXX_SOURCE_RUNS("int main() {return 2;}" CXX_RUN_SHOULD_FAIL)
CHECK_CXX_SOURCE_RUNS("int main() {return 0;}" CXX_RUN_SHOULD_WORK)
TEST_FAIL(CXX_BUILD_SHOULD_FAIL "CHECK_CXX_SOURCE_COMPILES() succeeded, but should have failed")
TEST_ASSERT(CXX_BUILD_SHOULD_WORK "CHECK_CXX_SOURCE_COMPILES() failed")
TEST_FAIL(CXX_RUN_SHOULD_FAIL "CHECK_CXX_SOURCE_RUNS() succeeded, but should have failed")
TEST_ASSERT(CXX_RUN_SHOULD_WORK "CHECK_CXX_SOURCE_RUNS() failed")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
foreach(lang C CXX)
Avoid if() quoted auto-dereference When testing CMAKE_<LANG>_COMPILER_ID values, do not explicitly dereference or quote the variable. We want if() to auto-dereference the variable and not its value. Also replace MATCHES with STREQUAL where equivalent.
2014-10-14 18:25:32 +04:00
if(NOT CMAKE_${lang}_COMPILER_ID STREQUAL "PathScale")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(${lang}_DD --)
endif()
endforeach()
Avoid PathScale cmd-line bug in TryCompile test The PathScale compiler silently accepts unknown options that start in more than one '-': $ touch foo.c $ pathcc -c foo.c --junk $ echo $? 0 $ pathcc -c foo.c ---junk $ echo $? 0 $ pathcc -c foo.c -junk pathcc ERROR parsing -junk: unknown flag $ echo $? 2 We teach the TryCompile to pass a bogus flag with only one '-' instead of three '-'s for this compiler.
2010-01-25 16:47:32 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
unset(C_BOGUS_FLAG CACHE)
include(CheckCCompilerFlag)
Avoid PathScale cmd-line bug in TryCompile test The PathScale compiler silently accepts unknown options that start in more than one '-': $ touch foo.c $ pathcc -c foo.c --junk $ echo $? 0 $ pathcc -c foo.c ---junk $ echo $? 0 $ pathcc -c foo.c -junk pathcc ERROR parsing -junk: unknown flag $ echo $? 2 We teach the TryCompile to pass a bogus flag with only one '-' instead of three '-'s for this compiler.
2010-01-25 16:47:32 +03:00
CHECK_C_COMPILER_FLAG(${C_DD}-_this_is_not_a_flag_ C_BOGUS_FLAG)
Test CHECK_(C|CXX)_COMPILER_FLAG macros This teaches the TryCompile test to check that the compiler flag check macros correctly reject a bad flag. See issue #9516.
2009-09-17 23:33:12 +04:00
TEST_FAIL(C_BOGUS_FLAG "CHECK_C_COMPILER_FLAG() succeeded, but should have failed")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
unset(CXX_BOGUS_FLAG CACHE)
include(CheckCXXCompilerFlag)
Avoid PathScale cmd-line bug in TryCompile test The PathScale compiler silently accepts unknown options that start in more than one '-': $ touch foo.c $ pathcc -c foo.c --junk $ echo $? 0 $ pathcc -c foo.c ---junk $ echo $? 0 $ pathcc -c foo.c -junk pathcc ERROR parsing -junk: unknown flag $ echo $? 2 We teach the TryCompile to pass a bogus flag with only one '-' instead of three '-'s for this compiler.
2010-01-25 16:47:32 +03:00
CHECK_CXX_COMPILER_FLAG(${CXX_DD}-_this_is_not_a_flag_ CXX_BOGUS_FLAG)
Test CHECK_(C|CXX)_COMPILER_FLAG macros This teaches the TryCompile test to check that the compiler flag check macros correctly reject a bad flag. See issue #9516.
2009-09-17 23:33:12 +04:00
TEST_FAIL(CXX_BOGUS_FLAG "CHECK_CXX_COMPILER_FLAG() succeeded, but should have failed")
CheckCCompilerFlag: Strict signature of 'main' (#11615) Use "int main(void)" instead of just "int main()" so that compiling with "gcc -Werror=strict-prototypes" works. Test this check using the flags "-Werror -Wstrict-prototypes" to work with old GCC versions.
2010-12-16 21:34:54 +03:00
Avoid if() quoted auto-dereference When testing CMAKE_<LANG>_COMPILER_ID values, do not explicitly dereference or quote the variable. We want if() to auto-dereference the variable and not its value. Also replace MATCHES with STREQUAL where equivalent.
2014-10-14 18:25:32 +04:00
if(CMAKE_C_COMPILER_ID STREQUAL "GNU")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
unset(C_STRICT_PROTOTYPES CACHE)
CheckCCompilerFlag: Strict signature of 'main' (#11615) Use "int main(void)" instead of just "int main()" so that compiling with "gcc -Werror=strict-prototypes" works. Test this check using the flags "-Werror -Wstrict-prototypes" to work with old GCC versions.
2010-12-16 21:34:54 +03:00
CHECK_C_COMPILER_FLAG("-Werror;-Wstrict-prototypes" C_STRICT_PROTOTYPES)
TEST_ASSERT(C_STRICT_PROTOTYPES "CHECK_C_COMPILER_FLAG failed -Werror -Wstrict-prototypes")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
endif()
Tests: Added test for check_prototype_definition.
2011-03-04 18:36:29 +03:00
#######################################################################
#
# also test that the check_prototype_definition macro works
include(CheckPrototypeDefinition)
check_prototype_definition(remove
"int remove(const char *pathname)"
"0"
"stdio.h"
TEST_REMOVE_PROTO)
test_assert(TEST_REMOVE_PROTO "check_prototype_definition for remove() failed")