CMake/Source/CTest/Curl/url.c

3679 lines
111 KiB
C
Raw Normal View History

2003-01-10 07:26:37 +03:00
/***************************************************************************
2004-10-05 17:34:20 +04:00
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
2003-01-07 05:13:39 +03:00
* \___|\___/|_| \_\_____|
*
2004-10-05 17:34:20 +04:00
* Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
2003-01-07 05:13:39 +03:00
*
2003-01-10 07:26:37 +03:00
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
2004-10-05 17:34:20 +04:00
*
2003-01-07 05:13:39 +03:00
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
2003-01-10 07:26:37 +03:00
* furnished to do so, under the terms of the COPYING file.
2003-01-07 05:13:39 +03:00
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* $Id$
2003-01-10 07:26:37 +03:00
***************************************************************************/
2003-01-07 05:13:39 +03:00
/* -- WIN32 approved -- */
#include "setup.h"
#include <stdio.h>
#include <string.h>
#include <stdarg.h>
#include <stdlib.h>
#include <ctype.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <errno.h>
#if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__)
#include <time.h>
#include <io.h>
#else
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#include <netinet/in.h>
#include <sys/time.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <netdb.h>
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_NET_IF_H
#include <net/if.h>
#endif
#include <sys/ioctl.h>
#include <signal.h>
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
2004-10-05 17:34:20 +04:00
#ifdef VMS
2003-01-07 05:13:39 +03:00
#include <in.h>
#include <inet.h>
#endif
2003-01-10 07:26:37 +03:00
#ifdef HAVE_SETJMP_H
#include <setjmp.h>
#endif
2003-01-07 05:13:39 +03:00
#ifndef HAVE_SELECT
#error "We can't compile without select() support!"
#endif
#ifndef HAVE_SOCKET
#error "We can't compile without socket() support!"
#endif
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
#endif
2004-10-05 17:34:20 +04:00
#ifdef USE_LIBIDN
#include <idna.h>
#include <stringprep.h>
#ifdef HAVE_IDN_FREE_H
#include <idn-free.h>
#else
void idn_free (void *ptr); /* prototype from idn-free.h, not provided by
libidn 0.4.5's make install! */
#endif
#ifndef HAVE_IDN_FREE
/* if idn_free() was not found in this version of libidn, use plain free()
instead */
#define idn_free(x) (free)(x)
#endif
#endif
#ifdef HAVE_OPENSSL_ENGINE_H
#include <openssl/engine.h>
#endif
2003-01-07 05:13:39 +03:00
#include "urldata.h"
#include "netrc.h"
#include "formdata.h"
#include "base64.h"
#include "ssluse.h"
#include "hostip.h"
#include "if2ip.h"
#include "transfer.h"
#include "sendf.h"
#include "progress.h"
#include "cookie.h"
#include "strequal.h"
#include "escape.h"
#include "strtok.h"
2003-01-14 17:12:37 +03:00
#include "share.h"
2004-10-05 17:34:20 +04:00
#include "content_encoding.h"
#include "http_digest.h"
#include "http_negotiate.h"
2003-01-07 05:13:39 +03:00
/* And now for the protocols */
#include "ftp.h"
#include "dict.h"
#include "telnet.h"
#include "http.h"
#include "file.h"
#include "ldap.h"
#include "url.h"
#include "connect.h"
2004-10-05 17:34:20 +04:00
#include "inet_ntop.h"
#include <ca-bundle.h>
2003-01-07 05:13:39 +03:00
#if defined(HAVE_INET_NTOA_R) && !defined(HAVE_INET_NTOA_R_DECL)
#include "inet_ntoa_r.h"
#endif
#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>
2004-10-05 17:34:20 +04:00
#ifdef HAVE_KRB4
2003-01-07 05:13:39 +03:00
#include "security.h"
#endif
2004-10-05 20:42:38 +04:00
#include "curl_memory.h"
2003-01-10 07:26:37 +03:00
2003-01-07 05:13:39 +03:00
/* The last #include file should be: */
#include "memdebug.h"
/* Local static prototypes */
2004-10-05 17:34:20 +04:00
static long ConnectionKillOne(struct SessionHandle *data);
2003-01-07 05:13:39 +03:00
static bool ConnectionExists(struct SessionHandle *data,
struct connectdata *needle,
struct connectdata **usethis);
2004-10-05 17:34:20 +04:00
static long ConnectionStore(struct SessionHandle *data,
struct connectdata *conn);
static bool safe_strequal(char* str1, char* str2);
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
#ifndef USE_ARES
/* not for Win32, unless it is cygwin
not for ares builds */
#if !defined(WIN32) || defined(__CYGWIN32__)
2003-01-07 05:13:39 +03:00
#ifndef RETSIGTYPE
#define RETSIGTYPE void
#endif
2003-01-10 07:26:37 +03:00
#ifdef HAVE_SIGSETJMP
extern sigjmp_buf curl_jmpenv;
#endif
2003-01-07 05:13:39 +03:00
static
2004-10-05 17:34:20 +04:00
RETSIGTYPE alarmfunc(int sig)
2003-01-07 05:13:39 +03:00
{
/* this is for "-ansi -Wall -pedantic" to stop complaining! (rabe) */
2004-10-05 17:34:20 +04:00
(void)sig;
2003-01-10 07:26:37 +03:00
#ifdef HAVE_SIGSETJMP
siglongjmp(curl_jmpenv, 1);
#endif
2003-01-07 05:13:39 +03:00
return;
}
#endif
2004-10-05 17:34:20 +04:00
#endif /* USE_ARES */
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
void Curl_safefree(void *ptr)
{
if(ptr)
free(ptr);
}
2003-01-07 05:13:39 +03:00
/*
* This is the internal function curl_easy_cleanup() calls. This should
* cleanup and free all resources associated with this sessionhandle.
*
* NOTE: if we ever add something that attempts to write to a socket or
* similar here, we must ignore SIGPIPE first. It is currently only done
* when curl_easy_perform() is invoked.
*/
CURLcode Curl_close(struct SessionHandle *data)
{
/* Loop through all open connections and kill them one by one */
while(-1 != ConnectionKillOne(data));
#ifdef USE_SSLEAY
/* Close down all open SSL info and sessions */
Curl_SSL_Close_All(data);
#endif
2003-01-10 07:26:37 +03:00
if(data->change.cookielist) /* clean up list if any */
curl_slist_free_all(data->change.cookielist);
2004-10-05 17:34:20 +04:00
Curl_safefree(data->state.auth_host);
Curl_safefree(data->state.scratch);
2003-01-07 05:13:39 +03:00
if(data->change.proxy_alloc)
free(data->change.proxy);
if(data->change.referer_alloc)
free(data->change.referer);
if(data->change.url_alloc)
free(data->change.url);
2004-10-05 17:34:20 +04:00
Curl_safefree(data->state.headerbuff);
2003-01-07 05:13:39 +03:00
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_HTTP
2004-10-05 17:34:20 +04:00
Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE);
if(data->set.cookiejar) {
2003-01-07 05:13:39 +03:00
/* we have a "destination" for all the cookies to get dumped to */
2004-10-05 17:34:20 +04:00
if(Curl_cookie_output(data->cookies, data->set.cookiejar))
infof(data, "WARNING: failed to save cookies in %s\n",
data->set.cookiejar);
}
if( !data->share || (data->cookies != data->share->cookies) ) {
Curl_cookie_cleanup(data->cookies);
}
Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE);
Curl_digest_cleanup(data);
2003-01-10 07:26:37 +03:00
#endif
2003-01-07 05:13:39 +03:00
/* free the connection cache */
free(data->state.connects);
2004-10-05 17:34:20 +04:00
Curl_safefree(data->info.contenttype);
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
#ifdef USE_ARES
/* this destroys the channel and we cannot use it anymore after this */
ares_destroy(data->state.areschannel);
#endif
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
/* No longer a dirty share, if it exists */
if (data->share)
data->share->dirty--;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
free(data);
return CURLE_OK;
2003-01-07 05:13:39 +03:00
}
2004-10-05 17:34:20 +04:00
/**
* Curl_open()
*
* @param curl is a pointer to a sessionhandle pointer that gets set by this
* function.
* @return CURLcode
*/
2003-01-07 05:13:39 +03:00
CURLcode Curl_open(struct SessionHandle **curl)
{
2004-10-05 17:34:20 +04:00
CURLcode res = CURLE_OK;
2003-01-07 05:13:39 +03:00
struct SessionHandle *data;
/* Very simple start-up: alloc the struct, init it with zeroes and return */
2004-10-05 17:34:20 +04:00
data = (struct SessionHandle *)calloc(1, sizeof(struct SessionHandle));
2003-01-07 05:13:39 +03:00
if(!data)
/* this is a very serious error */
return CURLE_OUT_OF_MEMORY;
2004-10-05 17:34:20 +04:00
#ifdef USE_ARES
if(ARES_SUCCESS != ares_init(&data->state.areschannel)) {
free(data);
return CURLE_FAILED_INIT;
}
/* make sure that all other returns from this function should destroy the
ares channel before returning error! */
#endif
2003-01-07 05:13:39 +03:00
/* We do some initial setup here, all those fields that can't be just 0 */
data->state.headerbuff=(char*)malloc(HEADERSIZE);
2004-10-05 17:34:20 +04:00
if(!data->state.headerbuff)
res = CURLE_OUT_OF_MEMORY;
else {
data->state.headersize=HEADERSIZE;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
data->set.out = stdout; /* default output to stdout */
data->set.in = stdin; /* default input from stdin */
data->set.err = stderr; /* default stderr to stderr */
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
/* use fwrite as default function to store output */
data->set.fwrite = (curl_write_callback)fwrite;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
/* use fread as default function to read input */
data->set.fread = (curl_read_callback)fread;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
data->set.infilesize = -1; /* we don't know any size */
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
data->state.current_speed = -1; /* init to negative == impossible */
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
data->set.httpreq = HTTPREQ_GET; /* Default HTTP request */
data->set.ftp_use_epsv = TRUE; /* FTP defaults to EPSV operations */
data->set.ftp_use_eprt = TRUE; /* FTP defaults to EPRT operations */
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
data->set.dns_cache_timeout = 60; /* Timeout every 60 seconds by default */
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
/* make libcurl quiet by default: */
data->set.hide_progress = TRUE; /* CURLOPT_NOPROGRESS changes these */
data->progress.flags |= PGRS_HIDE;
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
/* Set the default size of the SSL session ID cache */
data->set.ssl.numsessions = 5;
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
data->set.proxyport = 1080;
data->set.proxytype = CURLPROXY_HTTP; /* defaults to HTTP proxy */
data->set.httpauth = CURLAUTH_BASIC; /* defaults to basic */
data->set.proxyauth = CURLAUTH_BASIC; /* defaults to basic */
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
/* create an array with connection data struct pointers */
data->state.numconnects = 5; /* hard-coded right now */
data->state.connects = (struct connectdata **)
malloc(sizeof(struct connectdata *) * data->state.numconnects);
if(!data->state.connects)
res = CURLE_OUT_OF_MEMORY;
else
memset(data->state.connects, 0,
sizeof(struct connectdata *)*data->state.numconnects);
/*
* libcurl 7.10 introduced SSL verification *by default*! This needs to be
* switched off unless wanted.
*/
data->set.ssl.verifypeer = TRUE;
data->set.ssl.verifyhost = 2;
2003-01-10 07:26:37 +03:00
#ifdef CURL_CA_BUNDLE
2004-10-05 17:34:20 +04:00
/* This is our prefered CA cert bundle since install time */
data->set.ssl.CAfile = (char *)CURL_CA_BUNDLE;
2003-01-10 07:26:37 +03:00
#endif
2004-10-05 17:34:20 +04:00
}
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
if(res) {
#ifdef USE_ARES
ares_destroy(data->state.areschannel);
#endif
if(data->state.headerbuff)
free(data->state.headerbuff);
free(data);
data = NULL;
}
2003-01-07 05:13:39 +03:00
*curl = data;
return CURLE_OK;
}
CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option, ...)
{
va_list param;
char *cookiefile;
va_start(param, option);
switch(option) {
case CURLOPT_DNS_CACHE_TIMEOUT:
data->set.dns_cache_timeout = va_arg(param, int);
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_DNS_USE_GLOBAL_CACHE:
2003-01-07 05:13:39 +03:00
{
int use_cache = va_arg(param, int);
if (use_cache) {
Curl_global_host_cache_init();
}
2004-10-05 17:34:20 +04:00
data->set.global_dns_cache = use_cache;
2003-01-07 05:13:39 +03:00
}
break;
case CURLOPT_SSL_CIPHER_LIST:
/* set a list of cipher we want to use in the SSL connection */
data->set.ssl.cipher_list = va_arg(param, char *);
break;
case CURLOPT_RANDOM_FILE:
/*
* This is the path name to a file that contains random data to seed
* the random SSL stuff with. The file is only used for reading.
*/
data->set.ssl.random_file = va_arg(param, char *);
break;
case CURLOPT_EGDSOCKET:
/*
* The Entropy Gathering Daemon socket pathname
*/
data->set.ssl.egdsocket = va_arg(param, char *);
break;
case CURLOPT_MAXCONNECTS:
/*
* Set the absolute number of maximum simultaneous alive connection that
* libcurl is allowed to have.
*/
{
long newconnects= va_arg(param, long);
struct connectdata **newptr;
2004-10-05 17:34:20 +04:00
long i;
2003-01-07 05:13:39 +03:00
if(newconnects < data->state.numconnects) {
/* Since this number is *decreased* from the existing number, we must
close the possibly open connections that live on the indexes that
are being removed! */
for(i=newconnects; i< data->state.numconnects; i++)
Curl_disconnect(data->state.connects[i]);
}
if(newconnects) {
newptr= (struct connectdata **)
realloc(data->state.connects,
sizeof(struct connectdata *) * newconnects);
if(!newptr)
/* we closed a few connections in vain, but so what? */
return CURLE_OUT_OF_MEMORY;
2004-10-05 17:34:20 +04:00
/* nullify the newly added pointers */
for(i=data->state.numconnects; i<newconnects; i++) {
newptr[i] = NULL;
}
2003-01-07 05:13:39 +03:00
data->state.connects = newptr;
data->state.numconnects = newconnects;
}
else {
/* zero makes NO cache at all */
if(data->state.connects)
free(data->state.connects);
data->state.connects=NULL;
data->state.numconnects=0;
}
}
break;
case CURLOPT_FORBID_REUSE:
/*
* When this transfer is done, it must not be left to be reused by a
* subsequent transfer but shall be closed immediately.
*/
2004-10-05 17:34:20 +04:00
data->set.reuse_forbid = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_FRESH_CONNECT:
/*
* This transfer shall not use a previously cached connection but
* should be made with a fresh new connect!
*/
2004-10-05 17:34:20 +04:00
data->set.reuse_fresh = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_VERBOSE:
/*
* Verbose means infof() calls that give a lot of information about
* the connection and transfer procedures as well as internal choices.
*/
2004-10-05 17:34:20 +04:00
data->set.verbose = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_HEADER:
/*
* Set to include the header in the general data output stream.
*/
2004-10-05 17:34:20 +04:00
data->set.include_header = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_NOPROGRESS:
/*
* Shut off the internal supported progress meter
*/
2004-10-05 17:34:20 +04:00
data->set.hide_progress = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
if(data->set.hide_progress)
data->progress.flags |= PGRS_HIDE;
else
data->progress.flags &= ~PGRS_HIDE;
break;
case CURLOPT_NOBODY:
/*
* Do not include the body part in the output data stream.
*/
2004-10-05 17:34:20 +04:00
data->set.opt_no_body = va_arg(param, long)?TRUE:FALSE;
if(data->set.opt_no_body)
/* in HTTP lingo, this means using the HEAD request */
data->set.httpreq = HTTPREQ_HEAD;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_FAILONERROR:
/*
* Don't output the >=300 error code HTML-page, but instead only
* return error.
*/
2004-10-05 17:34:20 +04:00
data->set.http_fail_on_error = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_UPLOAD:
2004-10-05 17:34:20 +04:00
case CURLOPT_PUT:
2003-01-07 05:13:39 +03:00
/*
2004-10-05 17:34:20 +04:00
* We want to sent data to the remote host. If this is HTTP, that equals
* using the PUT request.
2003-01-07 05:13:39 +03:00
*/
2004-10-05 17:34:20 +04:00
data->set.upload = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
if(data->set.upload)
/* If this is HTTP, PUT is what's needed to "upload" */
data->set.httpreq = HTTPREQ_PUT;
break;
case CURLOPT_FILETIME:
/*
* Try to get the file time of the remote document. The time will
* later (possibly) become available using curl_easy_getinfo().
*/
2004-10-05 17:34:20 +04:00
data->set.get_filetime = va_arg(param, long)?TRUE:FALSE;
break;
case CURLOPT_FTP_CREATE_MISSING_DIRS:
/*
* An FTP option that modifies an upload to create missing directories on
* the server.
*/
data->set.ftp_create_missing_dirs = va_arg( param , long )?TRUE:FALSE;
break;
case CURLOPT_FTP_RESPONSE_TIMEOUT:
/*
* An FTP option that specifies how quickly an FTP response must be
* obtained before it is considered failure.
*/
data->set.ftp_response_timeout = va_arg( param , long );
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_FTPLISTONLY:
/*
* An FTP option that changes the command to one that asks for a list
* only, no file info details.
*/
2004-10-05 17:34:20 +04:00
data->set.ftp_list_only = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_FTPAPPEND:
/*
* We want to upload and append to an existing (FTP) file.
*/
2004-10-05 17:34:20 +04:00
data->set.ftp_append = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_NETRC:
/*
* Parse the $HOME/.netrc file
*/
2003-05-13 01:11:45 +04:00
data->set.use_netrc = (enum CURL_NETRC_OPTION)va_arg(param, long);
2003-01-07 05:13:39 +03:00
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_NETRC_FILE:
2003-01-07 05:13:39 +03:00
/*
2004-10-05 17:34:20 +04:00
* Use this file instead of the $HOME/.netrc file
2003-01-07 05:13:39 +03:00
*/
2004-10-05 17:34:20 +04:00
data->set.netrc_file = va_arg(param, char *);
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_TRANSFERTEXT:
/*
* This option was previously named 'FTPASCII'. Renamed to work with
* more protocols than merely FTP.
*
* Transfer using ASCII (instead of BINARY).
*/
2004-10-05 17:34:20 +04:00
data->set.ftp_ascii = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_TIMECONDITION:
/*
* Set HTTP time condition. This must be one of the defines in the
* curl/curl.h header file.
*/
2003-05-13 01:11:45 +04:00
data->set.timecondition = (curl_TimeCond)va_arg(param, long);
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_TIMEVALUE:
/*
* This is the value to compare with the remote document with the
* method set with CURLOPT_TIMECONDITION
*/
2004-10-05 17:34:20 +04:00
data->set.timevalue = (time_t)va_arg(param, long);
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_SSLVERSION:
/*
* Set explicit SSL version to try to connect with, as some SSL
* implementations are lame.
*/
data->set.ssl.version = va_arg(param, long);
break;
2004-10-05 17:34:20 +04:00
#ifndef CURL_DISABLE_HTTP
case CURLOPT_AUTOREFERER:
/*
* Switch on automatic referer that gets set if curl follows locations.
*/
data->set.http_auto_referer = va_arg(param, long)?1:0;
break;
case CURLOPT_ENCODING:
/*
* String to use at the value of Accept-Encoding header.
*
* If the encoding is set to "" we use an Accept-Encoding header that
* encompasses all the encodings we support.
* If the encoding is set to NULL we don't send an Accept-Encoding header
* and ignore an received Content-Encoding header.
*
*/
data->set.encoding = va_arg(param, char *);
if(data->set.encoding && !*data->set.encoding)
data->set.encoding = (char*)ALL_CONTENT_ENCODINGS;
break;
case CURLOPT_FOLLOWLOCATION:
/*
* Follow Location: header hints on a HTTP-server.
*/
data->set.http_follow_location = va_arg(param, long)?TRUE:FALSE;
break;
case CURLOPT_UNRESTRICTED_AUTH:
/*
* Send authentication (user+password) when following locations, even when
* hostname changed.
*/
data->set.http_disable_hostname_check_before_authentication =
va_arg(param, long)?TRUE:FALSE;
break;
case CURLOPT_MAXREDIRS:
/*
* The maximum amount of hops you allow curl to follow Location:
* headers. This should mostly be used to detect never-ending loops.
*/
data->set.maxredirs = va_arg(param, long);
break;
case CURLOPT_POST:
/* Does this option serve a purpose anymore? Yes it does, when
CURLOPT_POSTFIELDS isn't used and the POST data is read off the
callback! */
if(va_arg(param, long))
data->set.httpreq = HTTPREQ_POST;
break;
case CURLOPT_POSTFIELDS:
/*
* A string with POST data. Makes curl HTTP POST.
*/
data->set.postfields = va_arg(param, char *);
if(data->set.postfields)
data->set.httpreq = HTTPREQ_POST;
break;
case CURLOPT_POSTFIELDSIZE:
/*
* The size of the POSTFIELD data to prevent libcurl to do strlen() to
* figure it out. Enables binary posts.
*/
data->set.postfieldsize = va_arg(param, long);
break;
case CURLOPT_POSTFIELDSIZE_LARGE:
/*
* The size of the POSTFIELD data to prevent libcurl to do strlen() to
* figure it out. Enables binary posts.
*/
data->set.postfieldsize = va_arg(param, curl_off_t);
break;
case CURLOPT_HTTPPOST:
/*
* Set to make us do HTTP POST
*/
data->set.httppost = va_arg(param, struct curl_httppost *);
if(data->set.httppost)
data->set.httpreq = HTTPREQ_POST_FORM;
break;
case CURLOPT_REFERER:
/*
* String to set in the HTTP Referer: field.
*/
if(data->change.referer_alloc) {
free(data->change.referer);
data->change.referer_alloc = FALSE;
}
data->set.set_referer = va_arg(param, char *);
data->change.referer = data->set.set_referer;
break;
case CURLOPT_USERAGENT:
/*
* String to use in the HTTP User-Agent field
*/
data->set.useragent = va_arg(param, char *);
break;
case CURLOPT_HTTPHEADER:
/*
* Set a list with HTTP headers to use (or replace internals with)
*/
data->set.headers = va_arg(param, struct curl_slist *);
break;
case CURLOPT_HTTP200ALIASES:
/*
* Set a list of aliases for HTTP 200 in response header
*/
data->set.http200aliases = va_arg(param, struct curl_slist *);
break;
case CURLOPT_COOKIE:
/*
* Cookie string to send to the remote server in the request.
*/
data->set.cookie = va_arg(param, char *);
break;
case CURLOPT_COOKIEFILE:
/*
* Set cookie file to read and parse. Can be used multiple times.
*/
cookiefile = (char *)va_arg(param, void *);
if(cookiefile) {
struct curl_slist *cl;
/* append the cookie file name to the list of file names, and deal with
them later */
cl = curl_slist_append(data->change.cookielist, cookiefile);
if(!cl)
return CURLE_OUT_OF_MEMORY;
data->change.cookielist = cl;
}
break;
case CURLOPT_COOKIEJAR:
/*
* Set cookie file name to dump all cookies to when we're done.
*/
data->set.cookiejar = (char *)va_arg(param, void *);
/*
* Activate the cookie parser. This may or may not already
* have been made.
*/
data->cookies = Curl_cookie_init(data, NULL, data->cookies,
data->set.cookiesession);
break;
2003-01-10 07:26:37 +03:00
case CURLOPT_COOKIESESSION:
/*
* Set this option to TRUE to start a new "cookie session". It will
* prevent the forthcoming read-cookies-from-file actions to accept
* cookies that are marked as being session cookies, as they belong to a
* previous session.
*
* In the original Netscape cookie spec, "session cookies" are cookies
* with no expire date set. RFC2109 describes the same action if no
* 'Max-Age' is set and RFC2965 includes the RFC2109 description and adds
* a 'Discard' action that can enforce the discard even for cookies that
* have a Max-Age.
*
* We run mostly with the original cookie spec, as hardly anyone implements
* anything else.
*/
data->set.cookiesession = (bool)va_arg(param, long);
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_HTTPGET:
2003-01-07 05:13:39 +03:00
/*
2004-10-05 17:34:20 +04:00
* Set to force us do HTTP GET
2003-01-07 05:13:39 +03:00
*/
2004-10-05 17:34:20 +04:00
if(va_arg(param, long)) {
data->set.httpreq = HTTPREQ_GET;
data->set.upload = FALSE; /* switch off upload */
}
2003-01-07 05:13:39 +03:00
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_HTTP_VERSION:
2003-01-07 05:13:39 +03:00
/*
2004-10-05 17:34:20 +04:00
* This sets a requested HTTP version to be used. The value is one of
* the listed enums in curl/curl.h.
*/
data->set.httpversion = va_arg(param, long);
break;
case CURLOPT_HTTPPROXYTUNNEL:
/*
* Tunnel operations through the proxy instead of normal proxy use
*/
data->set.tunnel_thru_httpproxy = va_arg(param, long)?TRUE:FALSE;
break;
case CURLOPT_CUSTOMREQUEST:
/*
* Set a custom string to use as request
*/
data->set.customrequest = va_arg(param, char *);
/* we don't set
data->set.httpreq = HTTPREQ_CUSTOM;
here, we continue as if we were using the already set type
and this just changes the actual request keyword */
break;
case CURLOPT_PROXY:
/*
* Set proxy server:port to use as HTTP proxy.
*
* If the proxy is set to "" we explicitly say that we don't want to use a
* proxy (even though there might be environment variables saying so).
*
* Setting it to NULL, means no proxy but allows the environment variables
* to decide for us.
*/
if(data->change.proxy_alloc) {
/*
* The already set string is allocated, free that first
*/
data->change.proxy_alloc=FALSE;;
free(data->change.proxy);
}
data->set.set_proxy = va_arg(param, char *);
data->change.proxy = data->set.set_proxy;
break;
case CURLOPT_PROXYPORT:
/*
* Explicitly set HTTP proxy port number.
*/
data->set.proxyport = va_arg(param, long);
break;
case CURLOPT_HTTPAUTH:
/*
* Set HTTP Authentication type BITMASK.
2003-01-07 05:13:39 +03:00
*/
2004-10-05 17:34:20 +04:00
{
long auth = va_arg(param, long);
/* switch off bits we can't support */
#ifndef USE_SSLEAY
auth &= ~CURLAUTH_NTLM; /* no NTLM without SSL */
#endif
#ifndef HAVE_GSSAPI
auth &= ~CURLAUTH_GSSNEGOTIATE; /* no GSS-Negotiate without GSSAPI */
#endif
if(!auth)
return CURLE_FAILED_INIT; /* no supported types left! */
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
data->set.httpauth = auth;
}
break;
case CURLOPT_PROXYAUTH:
2003-01-07 05:13:39 +03:00
/*
2004-10-05 17:34:20 +04:00
* Set HTTP Authentication type BITMASK.
2003-01-07 05:13:39 +03:00
*/
2004-10-05 17:34:20 +04:00
{
long auth = va_arg(param, long);
/* switch off bits we can't support */
#ifndef USE_SSLEAY
auth &= ~CURLAUTH_NTLM; /* no NTLM without SSL */
#endif
#ifndef HAVE_GSSAPI
auth &= ~CURLAUTH_GSSNEGOTIATE; /* no GSS-Negotiate without GSSAPI */
2003-01-10 07:26:37 +03:00
#endif
2004-10-05 17:34:20 +04:00
if(!auth)
return CURLE_FAILED_INIT; /* no supported types left! */
data->set.proxyauth = auth;
}
break;
#endif /* CURL_DISABLE_HTTP */
2003-01-10 07:26:37 +03:00
2003-01-07 05:13:39 +03:00
case CURLOPT_WRITEHEADER:
/*
* Custom pointer to pass the header write callback function
*/
data->set.writeheader = (void *)va_arg(param, void *);
break;
case CURLOPT_ERRORBUFFER:
/*
* Error buffer provided by the caller to get the human readable
* error string in.
*/
data->set.errorbuffer = va_arg(param, char *);
break;
case CURLOPT_FILE:
/*
* FILE pointer to write to or include in the data write callback
*/
data->set.out = va_arg(param, FILE *);
break;
case CURLOPT_FTPPORT:
/*
* Use FTP PORT, this also specifies which IP address to use
*/
data->set.ftpport = va_arg(param, char *);
2004-10-05 17:34:20 +04:00
data->set.ftp_use_port = data->set.ftpport?1:0;
2003-01-07 05:13:39 +03:00
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_FTP_USE_EPRT:
data->set.ftp_use_eprt = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_FTP_USE_EPSV:
data->set.ftp_use_epsv = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_INFILE:
/*
* FILE pointer to read the file to be uploaded from. Or possibly
* used as argument to the read callback.
*/
data->set.in = va_arg(param, FILE *);
break;
case CURLOPT_INFILESIZE:
/*
* If known, this should inform curl about the file size of the
* to-be-uploaded file.
*/
data->set.infilesize = va_arg(param, long);
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_INFILESIZE_LARGE:
/*
* If known, this should inform curl about the file size of the
* to-be-uploaded file.
*/
data->set.infilesize = va_arg(param, curl_off_t);
break;
2003-01-07 05:13:39 +03:00
case CURLOPT_LOW_SPEED_LIMIT:
/*
* The low speed limit that if transfers are below this for
* CURLOPT_LOW_SPEED_TIME, the transfer is aborted.
*/
data->set.low_speed_limit=va_arg(param, long);
break;
case CURLOPT_LOW_SPEED_TIME:
/*
* The low speed time that if transfers are below the set
* CURLOPT_LOW_SPEED_LIMIT during this time, the transfer is aborted.
*/
data->set.low_speed_time=va_arg(param, long);
break;
case CURLOPT_URL:
/*
* The URL to fetch.
*/
if(data->change.url_alloc) {
/* the already set URL is allocated, free it first! */
free(data->change.url);
data->change.url_alloc=FALSE;
}
data->set.set_url = va_arg(param, char *);
data->change.url = data->set.set_url;
2004-10-05 17:34:20 +04:00
data->change.url_changed = TRUE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_PORT:
/*
* The port number to use when getting the URL
*/
data->set.use_port = va_arg(param, long);
break;
case CURLOPT_TIMEOUT:
/*
* The maximum time you allow curl to use for a single transfer
* operation.
*/
data->set.timeout = va_arg(param, long);
break;
case CURLOPT_CONNECTTIMEOUT:
/*
* The maximum time you allow curl to use to connect.
*/
data->set.connecttimeout = va_arg(param, long);
break;
2003-01-10 07:26:37 +03:00
2003-01-07 05:13:39 +03:00
case CURLOPT_USERPWD:
/*
* user:password to use in the operation
*/
data->set.userpwd = va_arg(param, char *);
break;
case CURLOPT_POSTQUOTE:
/*
2004-10-05 17:34:20 +04:00
* List of RAW FTP commands to use after a transfer
2003-01-07 05:13:39 +03:00
*/
data->set.postquote = va_arg(param, struct curl_slist *);
break;
case CURLOPT_PREQUOTE:
/*
* List of RAW FTP commands to use prior to RETR (Wesley Laxton)
*/
data->set.prequote = va_arg(param, struct curl_slist *);
break;
case CURLOPT_QUOTE:
/*
2004-10-05 17:34:20 +04:00
* List of RAW FTP commands to use before a transfer
2003-01-07 05:13:39 +03:00
*/
data->set.quote = va_arg(param, struct curl_slist *);
break;
case CURLOPT_PROGRESSFUNCTION:
/*
* Progress callback function
*/
data->set.fprogress = va_arg(param, curl_progress_callback);
2003-01-10 07:26:37 +03:00
if(data->set.fprogress)
data->progress.callback = TRUE; /* no longer internal */
else
data->progress.callback = FALSE; /* NULL enforces internal */
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_PROGRESSDATA:
/*
* Custom client data to pass to the progress callback
*/
data->set.progress_client = va_arg(param, void *);
break;
case CURLOPT_PROXYUSERPWD:
/*
* user:password needed to use the proxy
*/
data->set.proxyuserpwd = va_arg(param, char *);
break;
case CURLOPT_RANGE:
/*
* What range of the file you want to transfer
*/
data->set.set_range = va_arg(param, char *);
break;
case CURLOPT_RESUME_FROM:
/*
* Resume transfer at the give file position
*/
data->set.set_resume_from = va_arg(param, long);
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_RESUME_FROM_LARGE:
/*
* Resume transfer at the give file position
*/
data->set.set_resume_from = va_arg(param, curl_off_t);
break;
2003-01-10 07:26:37 +03:00
case CURLOPT_DEBUGFUNCTION:
/*
* stderr write callback.
*/
data->set.fdebug = va_arg(param, curl_debug_callback);
/*
* if the callback provided is NULL, it'll use the default callback
*/
break;
case CURLOPT_DEBUGDATA:
/*
* Set to a void * that should receive all error writes. This
* defaults to CURLOPT_STDERR for normal operations.
*/
data->set.debugdata = va_arg(param, void *);
break;
2003-01-07 05:13:39 +03:00
case CURLOPT_STDERR:
/*
* Set to a FILE * that should receive all error writes. This
* defaults to stderr for normal operations.
*/
data->set.err = va_arg(param, FILE *);
2003-01-10 07:26:37 +03:00
if(!data->set.err)
data->set.err = stderr;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_HEADERFUNCTION:
/*
* Set header write callback
*/
data->set.fwrite_header = va_arg(param, curl_write_callback);
break;
case CURLOPT_WRITEFUNCTION:
/*
* Set data write callback
*/
data->set.fwrite = va_arg(param, curl_write_callback);
2004-10-05 17:34:20 +04:00
if(!data->set.fwrite)
/* When set to NULL, reset to our internal default function */
data->set.fwrite = (curl_write_callback)fwrite;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_READFUNCTION:
/*
* Read data callback
*/
data->set.fread = va_arg(param, curl_read_callback);
2004-10-05 17:34:20 +04:00
if(!data->set.fread)
/* When set to NULL, reset to our internal default function */
data->set.fread = (curl_read_callback)fread;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_SSLCERT:
/*
* String that holds file name of the SSL certificate to use
*/
data->set.cert = va_arg(param, char *);
break;
case CURLOPT_SSLCERTTYPE:
/*
* String that holds file type of the SSL certificate to use
*/
data->set.cert_type = va_arg(param, char *);
break;
case CURLOPT_SSLKEY:
/*
* String that holds file name of the SSL certificate to use
*/
data->set.key = va_arg(param, char *);
break;
case CURLOPT_SSLKEYTYPE:
/*
* String that holds file type of the SSL certificate to use
*/
data->set.key_type = va_arg(param, char *);
break;
case CURLOPT_SSLKEYPASSWD:
/*
* String that holds the SSL private key password.
*/
data->set.key_passwd = va_arg(param, char *);
break;
case CURLOPT_SSLENGINE:
/*
* String that holds the SSL crypto engine.
*/
#ifdef HAVE_OPENSSL_ENGINE_H
{
const char *cpTemp = va_arg(param, char *);
ENGINE *e;
if (cpTemp && cpTemp[0]) {
e = ENGINE_by_id(cpTemp);
if (e) {
if (data->engine) {
ENGINE_free(data->engine);
}
data->engine = e;
}
else {
failf(data, "SSL Engine '%s' not found", cpTemp);
return CURLE_SSL_ENGINE_NOTFOUND;
}
}
}
2003-05-16 23:15:42 +04:00
break;
2003-01-07 05:13:39 +03:00
#else
return CURLE_SSL_ENGINE_NOTFOUND;
#endif
case CURLOPT_SSLENGINE_DEFAULT:
/*
* flag to set engine as default.
*/
#ifdef HAVE_OPENSSL_ENGINE_H
if (data->engine) {
if (ENGINE_set_default(data->engine, ENGINE_METHOD_ALL) > 0) {
#ifdef DEBUG
fprintf(stderr,"set default crypto engine\n");
#endif
}
else {
#ifdef DEBUG
failf(data, "set default crypto engine failed");
#endif
return CURLE_SSL_ENGINE_SETFAILED;
}
}
#endif
break;
case CURLOPT_CRLF:
/*
* Kludgy option to enable CRLF convertions. Subject for removal.
*/
2004-10-05 17:34:20 +04:00
data->set.crlf = va_arg(param, long)?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_INTERFACE:
/*
* Set what interface to bind to when performing an operation and thus
* what from-IP your connection will use.
*/
data->set.device = va_arg(param, char *);
break;
case CURLOPT_KRB4LEVEL:
/*
* A string that defines the krb4 security level.
*/
data->set.krb4_level = va_arg(param, char *);
2004-10-05 17:34:20 +04:00
data->set.krb4=data->set.krb4_level?TRUE:FALSE;
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_SSL_VERIFYPEER:
/*
* Enable peer SSL verifying.
*/
data->set.ssl.verifypeer = va_arg(param, long);
break;
case CURLOPT_SSL_VERIFYHOST:
/*
* Enable verification of the CN contained in the peer certificate
*/
data->set.ssl.verifyhost = va_arg(param, long);
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_SSL_CTX_FUNCTION:
/*
* Set a SSL_CTX callback
*/
data->set.ssl.fsslctx = va_arg(param, curl_ssl_ctx_callback);
break;
case CURLOPT_SSL_CTX_DATA:
/*
* Set a SSL_CTX callback parameter pointer
*/
data->set.ssl.fsslctxp = va_arg(param, void *);
break;
2003-01-07 05:13:39 +03:00
case CURLOPT_CAINFO:
/*
* Set CA info for SSL connection. Specify file name of the CA certificate
*/
data->set.ssl.CAfile = va_arg(param, char *);
2003-01-10 07:26:37 +03:00
break;
case CURLOPT_CAPATH:
/*
* Set CA path info for SSL connection. Specify directory name of the CA
* certificates which have been prepared using openssl c_rehash utility.
*/
/* This does not work on windows. */
data->set.ssl.CApath = va_arg(param, char *);
2003-01-07 05:13:39 +03:00
break;
case CURLOPT_TELNETOPTIONS:
/*
* Set a linked list of telnet options
*/
data->set.telnet_options = va_arg(param, struct curl_slist *);
break;
2003-01-10 07:26:37 +03:00
case CURLOPT_BUFFERSIZE:
/*
* The application kindly asks for a differently sized receive buffer.
* If it seems reasonable, we'll use it.
*/
data->set.buffer_size = va_arg(param, long);
2004-10-05 17:34:20 +04:00
if((data->set.buffer_size> (BUFSIZE -1 )) ||
(data->set.buffer_size < 1))
2003-01-10 07:26:37 +03:00
data->set.buffer_size = 0; /* huge internal default */
break;
case CURLOPT_NOSIGNAL:
/*
* The application asks not to set any signal() or alarm() handlers,
* even when using a timeout.
*/
2004-10-05 17:34:20 +04:00
data->set.no_signal = va_arg(param, long) ? TRUE : FALSE;
2003-01-10 07:26:37 +03:00
break;
case CURLOPT_SHARE:
{
2003-01-14 17:12:37 +03:00
struct Curl_share *set;
set = va_arg(param, struct Curl_share *);
2004-10-05 17:34:20 +04:00
/* disconnect from old share, if any */
if(data->share) {
Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
if(data->share->hostcache == data->hostcache)
data->hostcache = NULL;
if(data->share->cookies == data->cookies)
data->cookies = NULL;
2003-01-10 07:26:37 +03:00
data->share->dirty--;
2004-10-05 17:34:20 +04:00
Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
data->share = NULL;
}
/* use new share if it set */
2003-01-10 07:26:37 +03:00
data->share = set;
2004-10-05 17:34:20 +04:00
if(data->share) {
Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
data->share->dirty++;
if(data->share->hostcache) {
/* use shared host cache, first free own one if any */
if(data->hostcache)
Curl_hash_destroy(data->hostcache);
data->hostcache = data->share->hostcache;
}
#ifndef CURL_DISABLE_HTTP
if(data->share->cookies) {
/* use shared cookie list, first free own one if any */
if (data->cookies)
Curl_cookie_cleanup(data->cookies);
data->cookies = data->share->cookies;
}
#endif /* CURL_DISABLE_HTTP */
Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
}
#ifndef CURL_DISABLE_HTTP
/* check cookie list is set */
if(!data->cookies)
data->cookies = Curl_cookie_init(data, NULL, NULL, TRUE );
#endif /* CURL_DISABLE_HTTP */
/* check for host cache not needed,
* it will be done by curl_easy_perform */
2003-01-10 07:26:37 +03:00
}
break;
case CURLOPT_PROXYTYPE:
/*
* Set proxy type. HTTP/SOCKS4/SOCKS5
*/
2003-05-13 01:11:45 +04:00
data->set.proxytype = (curl_proxytype)va_arg(param, long);
2003-01-10 07:26:37 +03:00
break;
2003-01-14 17:12:37 +03:00
case CURLOPT_PRIVATE:
/*
* Set private data pointer.
*/
data->set.private = va_arg(param, char *);
break;
2004-10-05 17:34:20 +04:00
case CURLOPT_MAXFILESIZE:
2003-01-14 17:12:37 +03:00
/*
2004-10-05 17:34:20 +04:00
* Set the maximum size of a file to download.
2003-01-14 17:12:37 +03:00
*/
2004-10-05 17:34:20 +04:00
data->set.max_filesize = va_arg(param, long);
break;
case CURLOPT_FTP_SSL:
/*
* Make FTP transfers attempt to use SSL/TLS.
*/
data->set.ftp_ssl = (curl_ftpssl)va_arg(param, long);
break;
case CURLOPT_IPRESOLVE:
data->set.ip_version = va_arg(param, long);
break;
case CURLOPT_MAXFILESIZE_LARGE:
/*
* Set the maximum size of a file to download.
*/
data->set.max_filesize = va_arg(param, curl_off_t);
break;
case CURLOPT_TCP_NODELAY:
/*
* Enable or disable TCP_NODELAY, which will disable/enable the Nagle
* algorithm
*/
data->set.tcp_nodelay = (bool)va_arg(param, long);
break;
/*********** 3rd party transfer options ***********/
case CURLOPT_SOURCE_HOST:
/*
* Use SOURCE HOST
*/
data->set.source_host = va_arg(param, char *);
data->set.printhost = (data->set.source_host != NULL);
break;
case CURLOPT_SOURCE_PORT:
/*
* Use SOURCE PORT
*/
data->set.source_port = va_arg(param, char *);
break;
case CURLOPT_SOURCE_USERPWD:
/*
* Use SOURCE USER[:PASSWORD]
*/
data->set.source_userpwd = va_arg(param, char *);
break;
case CURLOPT_SOURCE_PATH:
/*
* Use SOURCE PATH
*/
data->set.source_path = va_arg(param, char *);
break;
case CURLOPT_PASV_HOST:
/*
* Indicates whether source or target host is passive
*/
data->set.pasvHost = va_arg(param, long)?CURL_SOURCE_PASV:CURL_TARGET_PASV;
break;
case CURLOPT_SOURCE_PREQUOTE:
/*
* List of RAW FTP commands to use before a transfer on the source host
*/
data->set.source_prequote = va_arg(param, struct curl_slist *);
break;
case CURLOPT_SOURCE_POSTQUOTE:
/*
* List of RAW FTP commands to use after a transfer on the source host
*/
data->set.source_postquote = va_arg(param, struct curl_slist *);
2003-01-14 17:12:37 +03:00
break;
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
default:
/* unknown tag and its companion, just ignore: */
2003-01-10 07:26:37 +03:00
return CURLE_FAILED_INIT; /* correct this */
2003-01-07 05:13:39 +03:00
}
return CURLE_OK;
}
CURLcode Curl_disconnect(struct connectdata *conn)
{
2004-10-05 17:34:20 +04:00
struct SessionHandle *data;
2003-01-07 05:13:39 +03:00
if(!conn)
return CURLE_OK; /* this is closed and fine already */
2004-10-05 17:34:20 +04:00
data = conn->data;
2003-01-07 05:13:39 +03:00
/*
* The range string is usually freed in curl_done(), but we might
* get here *instead* if we fail prematurely. Thus we need to be able
* to free this resource here as well.
*/
if(conn->bits.rangestringalloc) {
free(conn->range);
conn->bits.rangestringalloc = FALSE;
}
2004-10-05 17:34:20 +04:00
if((conn->ntlm.state != NTLMSTATE_NONE) ||
(conn->proxyntlm.state != NTLMSTATE_NONE)) {
/* Authentication data is a mix of connection-related and sessionhandle-
related stuff. NTLM is connection-related so when we close the shop
we shall forget. */
data->state.authhost.done = FALSE;
data->state.authhost.picked =
data->state.authhost.want;
data->state.authproxy.done = FALSE;
data->state.authproxy.picked =
data->state.authhost.want;
data->state.authproblem = FALSE;
2003-01-07 05:13:39 +03:00
}
if(conn->curl_disconnect)
/* This is set if protocol-specific cleanups should be made */
conn->curl_disconnect(conn);
2004-10-05 17:34:20 +04:00
if(-1 != conn->connectindex) {
/* unlink ourselves! */
infof(data, "Closing connection #%ld\n", conn->connectindex);
data->state.connects[conn->connectindex] = NULL;
}
Curl_safefree(conn->proto.generic);
Curl_safefree(conn->newurl);
Curl_safefree(conn->pathbuffer); /* the URL path buffer */
Curl_safefree(conn->host.rawalloc); /* host name buffer */
Curl_safefree(conn->proxy.rawalloc); /* proxy name buffer */
#ifdef USE_LIBIDN
if(conn->host.encalloc)
idn_free(conn->host.encalloc); /* encoded host name buffer, must be freed
with idn_free() since this was allocated
by libidn */
if(conn->proxy.encalloc)
idn_free(conn->proxy.encalloc); /* encoded proxy name buffer, must be
freed with idn_free() since this was
allocated by libidn */
#endif
2003-01-07 05:13:39 +03:00
Curl_SSL_Close(conn);
/* close possibly still open sockets */
2004-10-05 17:34:20 +04:00
if(CURL_SOCKET_BAD != conn->sock[SECONDARYSOCKET])
sclose(conn->sock[SECONDARYSOCKET]);
if(CURL_SOCKET_BAD != conn->sock[FIRSTSOCKET])
sclose(conn->sock[FIRSTSOCKET]);
Curl_safefree(conn->user);
Curl_safefree(conn->passwd);
Curl_safefree(conn->proxyuser);
Curl_safefree(conn->proxypasswd);
Curl_safefree(conn->allocptr.proxyuserpwd);
Curl_safefree(conn->allocptr.uagent);
Curl_safefree(conn->allocptr.userpwd);
Curl_safefree(conn->allocptr.accept_encoding);
Curl_safefree(conn->allocptr.rangeline);
Curl_safefree(conn->allocptr.ref);
Curl_safefree(conn->allocptr.host);
Curl_safefree(conn->allocptr.cookiehost);
#if defined(USE_ARES) || defined(USE_THREADING_GETHOSTBYNAME) || \
defined(USE_THREADING_GETADDRINFO)
/* possible left-overs from the async name resolve */
Curl_safefree(conn->async.hostname);
Curl_safefree(conn->async.os_specific);
#endif
Curl_free_ssl_config(&conn->ssl_config);
2003-01-07 05:13:39 +03:00
free(conn); /* free all the connection oriented data */
return CURLE_OK;
}
/*
* This function should return TRUE if the socket is to be assumed to
* be dead. Most commonly this happens when the server has closed the
* connection due to inactivity.
*/
2004-10-05 17:34:20 +04:00
static bool SocketIsDead(curl_socket_t sock)
{
int sval;
bool ret_val = TRUE;
fd_set check_set;
struct timeval to;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
FD_ZERO(&check_set);
FD_SET(sock, &check_set);
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
to.tv_sec = 0;
to.tv_usec = 0;
2003-01-07 05:13:39 +03:00
sval = select(sock + 1, &check_set, 0, 0, &to);
if(sval == 0)
/* timeout */
ret_val = FALSE;
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
return ret_val;
}
/*
* Given one filled in connection struct (named needle), this function should
* detect if there already is one that have all the significant details
* exactly the same and thus should be used instead.
*/
static bool
ConnectionExists(struct SessionHandle *data,
struct connectdata *needle,
struct connectdata **usethis)
{
long i;
struct connectdata *check;
for(i=0; i< data->state.numconnects; i++) {
2003-01-10 07:26:37 +03:00
bool match = FALSE;
2003-01-07 05:13:39 +03:00
/*
* Note that if we use a HTTP proxy, we check connections to that
* proxy and not to the actual remote server.
*/
check = data->state.connects[i];
if(!check)
/* NULL pointer means not filled-in entry */
continue;
2004-10-05 17:34:20 +04:00
if((needle->protocol&PROT_SSL) != (check->protocol&PROT_SSL))
/* don't do mixed SSL and non-SSL connections */
continue;
2003-01-07 05:13:39 +03:00
if(!needle->bits.httpproxy || needle->protocol&PROT_SSL) {
/* The requested connection does not use a HTTP proxy or it
uses SSL. */
if(!(needle->protocol&PROT_SSL) && check->bits.httpproxy)
/* we don't do SSL but the cached connection has a proxy,
then don't match this */
continue;
if(strequal(needle->protostr, check->protostr) &&
2004-10-05 17:34:20 +04:00
strequal(needle->host.name, check->host.name) &&
2003-01-07 05:13:39 +03:00
(needle->remote_port == check->remote_port) ) {
2004-10-05 17:34:20 +04:00
if(needle->protocol & PROT_SSL) {
/* This is SSL, verify that we're using the same
ssl options as well */
if(!Curl_ssl_config_matches(&needle->ssl_config,
&check->ssl_config)) {
continue;
}
}
if((needle->protocol & PROT_FTP) ||
((needle->protocol & PROT_HTTP) &&
(needle->data->state.authhost.want==CURLAUTH_NTLM))) {
/* This is FTP or HTTP+NTLM, verify that we're using the same name
and password as well */
if(!strequal(needle->user, check->user) ||
!strequal(needle->passwd, check->passwd)) {
2003-01-07 05:13:39 +03:00
/* one of them was different */
continue;
}
}
2003-01-10 07:26:37 +03:00
match = TRUE;
2003-01-07 05:13:39 +03:00
}
}
else { /* The requested needle connection is using a proxy,
is the checked one using the same? */
if(check->bits.httpproxy &&
2004-10-05 17:34:20 +04:00
strequal(needle->proxy.name, check->proxy.name) &&
2003-01-07 05:13:39 +03:00
needle->port == check->port) {
/* This is the same proxy connection, use it! */
2003-01-10 07:26:37 +03:00
match = TRUE;
}
}
if(match) {
2004-10-05 17:34:20 +04:00
bool dead = SocketIsDead(check->sock[FIRSTSOCKET]);
2003-01-10 07:26:37 +03:00
if(dead) {
/*
*/
infof(data, "Connection %d seems to be dead!\n", i);
Curl_disconnect(check); /* disconnect resources */
data->state.connects[i]=NULL; /* nothing here */
/* There's no need to continue searching, because we only store
one connection for each unique set of identifiers */
return FALSE;
2003-01-07 05:13:39 +03:00
}
2003-01-10 07:26:37 +03:00
*usethis = check;
return TRUE; /* yes, we found one to use! */
2003-01-07 05:13:39 +03:00
}
}
return FALSE; /* no matching connecting exists */
}
/*
* This function frees/closes a connection in the connection cache. This
* should take the previously set policy into account when deciding which
* of the connections to kill.
*/
2004-10-05 17:34:20 +04:00
static long
2003-01-07 05:13:39 +03:00
ConnectionKillOne(struct SessionHandle *data)
{
long i;
struct connectdata *conn;
2004-10-05 17:34:20 +04:00
long highscore=-1;
long connindex=-1;
long score;
2003-01-07 05:13:39 +03:00
struct timeval now;
now = Curl_tvnow();
for(i=0; i< data->state.numconnects; i++) {
conn = data->state.connects[i];
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
if(!conn)
continue;
/*
* By using the set policy, we score each connection.
*/
switch(data->set.closepolicy) {
case CURLCLOSEPOLICY_LEAST_RECENTLY_USED:
default:
/*
* Set higher score for the age passed since the connection
* was used.
*/
score = Curl_tvdiff(now, conn->now);
break;
case CURLCLOSEPOLICY_OLDEST:
/*
* Set higher score for the age passed since the connection
* was created.
*/
score = Curl_tvdiff(now, conn->created);
break;
}
if(score > highscore) {
highscore = score;
connindex = i;
}
}
if(connindex >= 0) {
/* the winner gets the honour of being disconnected */
2004-10-05 17:34:20 +04:00
(void) Curl_disconnect(data->state.connects[connindex]);
2003-01-07 05:13:39 +03:00
/* clean the array entry */
data->state.connects[connindex] = NULL;
}
return connindex; /* return the available index or -1 */
}
/*
* The given input connection struct pointer is to be stored. If the "cache"
* is already full, we must clean out the most suitable using the previously
* set policy.
*
* The given connection should be unique. That must've been checked prior to
* this call.
*/
2004-10-05 17:34:20 +04:00
static long
2003-01-07 05:13:39 +03:00
ConnectionStore(struct SessionHandle *data,
struct connectdata *conn)
{
long i;
for(i=0; i< data->state.numconnects; i++) {
if(!data->state.connects[i])
break;
}
if(i == data->state.numconnects) {
/* there was no room available, kill one */
i = ConnectionKillOne(data);
infof(data, "Connection (#%d) was killed to make room\n", i);
}
if(-1 != i) {
/* only do this if a true index was returned, if -1 was returned there
is no room in the cache for an unknown reason and we cannot store
this there. */
data->state.connects[i] = conn; /* fill in this */
conn->connectindex = i; /* make the child know where the pointer to this
particular data is stored */
}
return i;
}
2003-01-10 07:26:37 +03:00
/*
* This function logs in to a SOCKS5 proxy and sends the specifies the final
* desitination server.
*/
2004-10-05 17:34:20 +04:00
static int handleSock5Proxy(const char *proxy_name,
const char *proxy_password,
struct connectdata *conn)
2003-01-10 07:26:37 +03:00
{
2004-10-05 17:34:20 +04:00
/*
According to the RFC1928, section "6. Replies". This is what a SOCK5
replies:
+----+-----+-------+------+----------+----------+
|VER | REP | RSV | ATYP | BND.ADDR | BND.PORT |
+----+-----+-------+------+----------+----------+
| 1 | 1 | X'00' | 1 | Variable | 2 |
+----+-----+-------+------+----------+----------+
Where:
o VER protocol version: X'05'
o REP Reply field:
o X'00' succeeded
*/
2003-01-10 07:26:37 +03:00
unsigned char socksreq[600]; /* room for large user/pw (255 max each) */
2003-05-07 18:27:32 +04:00
ssize_t actualread;
ssize_t written;
2004-10-05 17:34:20 +04:00
int result;
CURLcode code;
int sock = conn->sock[FIRSTSOCKET];
2003-01-10 07:26:37 +03:00
Curl_nonblock(sock, FALSE);
socksreq[0] = 5; /* version */
2004-10-05 17:34:20 +04:00
socksreq[1] = (char)(proxy_name ? 2 : 1); /* number of methods (below) */
2003-01-10 07:26:37 +03:00
socksreq[2] = 0; /* no authentication */
socksreq[3] = 2; /* username/password */
2004-10-05 17:34:20 +04:00
code = Curl_write(conn, sock, (char *)socksreq, (2 + (int)socksreq[1]),
2003-01-10 07:26:37 +03:00
&written);
2004-10-05 17:34:20 +04:00
if ((code != CURLE_OK) || (written != (2 + (int)socksreq[1]))) {
2003-01-10 07:26:37 +03:00
failf(conn->data, "Unable to send initial SOCKS5 request.");
return 1;
}
2004-10-05 17:34:20 +04:00
result=Curl_read(conn, sock, (char *)socksreq, 2, &actualread);
2003-01-10 07:26:37 +03:00
if ((result != CURLE_OK) || (actualread != 2)) {
failf(conn->data, "Unable to receive initial SOCKS5 response.");
return 1;
}
if (socksreq[0] != 5) {
failf(conn->data, "Received invalid version in initial SOCKS5 response.");
return 1;
}
if (socksreq[1] == 0) {
/* Nothing to do, no authentication needed */
;
}
else if (socksreq[1] == 2) {
/* Needs user name and password */
int userlen, pwlen, len;
userlen = (int)strlen(proxy_name);
2004-10-05 17:34:20 +04:00
pwlen = proxy_password?(int)strlen(proxy_password):0;
2003-01-10 07:26:37 +03:00
/* username/password request looks like
* +----+------+----------+------+----------+
* |VER | ULEN | UNAME | PLEN | PASSWD |
* +----+------+----------+------+----------+
* | 1 | 1 | 1 to 255 | 1 | 1 to 255 |
* +----+------+----------+------+----------+
*/
len = 0;
socksreq[len++] = 1; /* username/pw subnegotiation version */
socksreq[len++] = (char) userlen;
memcpy(socksreq + len, proxy_name, (int) userlen);
len += userlen;
socksreq[len++] = (char) pwlen;
memcpy(socksreq + len, proxy_password, (int) pwlen);
len += pwlen;
2004-10-05 17:34:20 +04:00
code = Curl_write(conn, sock, (char *)socksreq, len, &written);
if ((code != CURLE_OK) || (len != written)) {
2003-01-10 07:26:37 +03:00
failf(conn->data, "Failed to send SOCKS5 sub-negotiation request.");
return 1;
}
2004-10-05 17:34:20 +04:00
result=Curl_read(conn, sock, (char *)socksreq, 2, &actualread);
2003-01-10 07:26:37 +03:00
if ((result != CURLE_OK) || (actualread != 2)) {
failf(conn->data, "Unable to receive SOCKS5 sub-negotiation response.");
return 1;
}
if ((socksreq[0] != 5) || /* version */
(socksreq[1] != 0)) { /* status */
failf(conn->data, "User was rejected by the SOCKS5 server (%d %d).",
socksreq[0], socksreq[1]);
return 1;
}
/* Everything is good so far, user was authenticated! */
}
else {
/* error */
if (socksreq[1] == 1) {
failf(conn->data,
"SOCKS5 GSSAPI per-message authentication is not supported.");
return 1;
}
else if (socksreq[1] == 255) {
if (proxy_name[0] == 0) {
failf(conn->data,
"No authentication method was acceptable. (It is quite likely"
" that the SOCKS5 server wanted a username/password, since none"
" was supplied to the server on this connection.)");
}
2004-10-05 17:34:20 +04:00
else {
2003-01-10 07:26:37 +03:00
failf(conn->data, "No authentication method was acceptable.");
}
return 1;
}
else {
failf(conn->data,
"Undocumented SOCKS5 mode attempted to be used by server.");
return 1;
}
}
/* Authentication is complete, now specify destination to the proxy */
socksreq[0] = 5; /* version (SOCKS5) */
socksreq[1] = 1; /* connect */
socksreq[2] = 0; /* must be zero */
socksreq[3] = 1; /* IPv4 = 1 */
2004-10-05 17:34:20 +04:00
2003-01-10 07:26:37 +03:00
{
struct Curl_dns_entry *dns;
Curl_addrinfo *hp=NULL;
2004-10-05 17:34:20 +04:00
int rc = Curl_resolv(conn, conn->host.name, (int)conn->remote_port, &dns);
if(rc == CURLRESOLV_ERROR)
return 1;
if(rc == CURLRESOLV_PENDING)
/* this requires that we're in "wait for resolve" state */
rc = Curl_wait_for_resolv(conn, &dns);
2003-01-10 07:26:37 +03:00
/*
* We cannot use 'hostent' as a struct that Curl_resolv() returns. It
* returns a Curl_addrinfo pointer that may not always look the same.
*/
if(dns)
hp=dns->addr;
2004-10-05 17:34:20 +04:00
if (hp) {
char buf[64];
unsigned short ip[4];
Curl_printable_address(hp, buf, sizeof(buf));
if(4 == sscanf( buf, "%hu.%hu.%hu.%hu",
&ip[0], &ip[1], &ip[2], &ip[3])) {
socksreq[4] = (unsigned char)ip[0];
socksreq[5] = (unsigned char)ip[1];
socksreq[6] = (unsigned char)ip[2];
socksreq[7] = (unsigned char)ip[3];
}
else
hp = NULL; /* fail! */
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
Curl_resolv_unlock(conn->data, dns); /* not used anymore from now on */
2003-01-10 07:26:37 +03:00
}
2004-10-05 17:34:20 +04:00
if(!hp) {
2003-01-10 07:26:37 +03:00
failf(conn->data, "Failed to resolve \"%s\" for SOCKS5 connect.",
2004-10-05 17:34:20 +04:00
conn->host.name);
2003-01-10 07:26:37 +03:00
return 1;
}
}
2004-10-05 17:34:20 +04:00
*((unsigned short*)&socksreq[8]) = htons(conn->remote_port);
2003-01-10 07:26:37 +03:00
{
const int packetsize = 10;
2004-10-05 17:34:20 +04:00
code = Curl_write(conn, sock, (char *)socksreq, packetsize, &written);
if ((code != CURLE_OK) || (written != packetsize)) {
2003-01-10 07:26:37 +03:00
failf(conn->data, "Failed to send SOCKS5 connect request.");
return 1;
}
2004-10-05 17:34:20 +04:00
result = Curl_read(conn, sock, (char *)socksreq, packetsize, &actualread);
2003-01-10 07:26:37 +03:00
if ((result != CURLE_OK) || (actualread != packetsize)) {
failf(conn->data, "Failed to receive SOCKS5 connect request ack.");
return 1;
}
if (socksreq[0] != 5) { /* version */
failf(conn->data,
"SOCKS5 reply has wrong version, version should be 5.");
return 1;
}
if (socksreq[1] != 0) { /* Anything besides 0 is an error */
failf(conn->data,
"Can't complete SOCKS5 connection to %d.%d.%d.%d:%d. (%d)",
(unsigned char)socksreq[4], (unsigned char)socksreq[5],
(unsigned char)socksreq[6], (unsigned char)socksreq[7],
2004-10-05 17:34:20 +04:00
(unsigned int)ntohs(*(unsigned short*)(&socksreq[8])),
2003-01-10 07:26:37 +03:00
socksreq[1]);
return 1;
}
}
Curl_nonblock(sock, TRUE);
return 0; /* Proxy was successful! */
}
static CURLcode ConnectPlease(struct connectdata *conn,
struct Curl_dns_entry *hostaddr,
bool *connected)
2003-01-07 05:13:39 +03:00
{
CURLcode result;
2004-10-05 17:34:20 +04:00
Curl_addrinfo *addr;
struct SessionHandle *data = conn->data;
char *hostname = data->change.proxy?conn->proxy.name:conn->host.name;
infof(data, "About to connect() to %s port %d\n",
hostname, conn->port);
2003-01-07 05:13:39 +03:00
/*************************************************************
* Connect to server/proxy
*************************************************************/
result= Curl_connecthost(conn,
2003-01-10 07:26:37 +03:00
hostaddr,
2004-10-05 17:34:20 +04:00
&conn->sock[FIRSTSOCKET],
2003-01-10 07:26:37 +03:00
&addr,
connected);
2003-01-07 05:13:39 +03:00
if(CURLE_OK == result) {
2004-10-05 17:34:20 +04:00
/* All is cool, then we store the current information */
conn->dns_entry = hostaddr;
conn->ip_addr = addr;
2003-01-10 07:26:37 +03:00
if (conn->data->set.proxytype == CURLPROXY_SOCKS5) {
2004-10-05 17:34:20 +04:00
return handleSock5Proxy(conn->proxyuser,
conn->proxypasswd,
conn) ?
2003-01-10 07:26:37 +03:00
CURLE_COULDNT_CONNECT : CURLE_OK;
}
else if (conn->data->set.proxytype == CURLPROXY_HTTP) {
/* do nothing here. handled later. */
}
else {
failf(conn->data, "unknown proxytype option given");
2004-10-05 17:34:20 +04:00
return CURLE_COULDNT_CONNECT;
2003-01-10 07:26:37 +03:00
}
2003-01-07 05:13:39 +03:00
}
return result;
}
2003-01-14 17:12:37 +03:00
/*
2004-10-05 17:34:20 +04:00
* verboseconnect() displays verbose information after a connect
2003-01-14 17:12:37 +03:00
*/
2004-10-05 17:34:20 +04:00
static void verboseconnect(struct connectdata *conn)
2003-01-10 07:26:37 +03:00
{
struct SessionHandle *data = conn->data;
2004-10-05 17:34:20 +04:00
char addrbuf[256];
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
/* Get a printable version of the network address. */
Curl_printable_address(conn->ip_addr, addrbuf, sizeof(addrbuf));
infof(data, "Connected to %s (%s) port %d\n",
conn->bits.httpproxy ? conn->proxy.dispname : conn->host.dispname,
addrbuf[0] ? addrbuf : "??", conn->port);
2003-01-10 07:26:37 +03:00
}
/*
* We have discovered that the TCP connection has been successful, we can now
* proceed with some action.
*
* If we're using the multi interface, this host address pointer is most
* likely NULL at this point as we can't keep the resolved info around. This
* may call for some reworking, like a reference counter in the struct or
2004-10-05 17:34:20 +04:00
* something.
2003-01-10 07:26:37 +03:00
*/
2004-10-05 17:34:20 +04:00
CURLcode Curl_protocol_connect(struct connectdata *conn)
2003-01-10 07:26:37 +03:00
{
struct SessionHandle *data = conn->data;
CURLcode result=CURLE_OK;
2004-10-05 17:34:20 +04:00
2003-01-14 17:12:37 +03:00
if(conn->bits.tcpconnect)
/* We already are connected, get back. This may happen when the connect
worked fine in the first call, like when we connect to a local server
or proxy. */
return CURLE_OK;
2003-01-10 07:26:37 +03:00
Curl_pgrsTime(data, TIMER_CONNECT); /* connect done */
if(data->set.verbose)
2004-10-05 17:34:20 +04:00
verboseconnect(conn);
2003-01-10 07:26:37 +03:00
if(conn->curl_connect) {
/* is there a protocol-specific connect() procedure? */
/* set start time here for timeout purposes in the
* connect procedure, it is later set again for the
* progress meter purpose */
conn->now = Curl_tvnow();
/* Call the protocol-specific connect function */
result = conn->curl_connect(conn);
}
return result; /* pass back status */
}
2004-10-05 17:34:20 +04:00
/*
* Helpers for IDNA convertions.
*/
#ifdef USE_LIBIDN
static bool is_ASCII_name (const char *hostname)
{
const unsigned char *ch = (const unsigned char*)hostname;
while (*ch) {
if (*ch++ & 0x80)
return FALSE;
}
return TRUE;
}
#endif
static void fix_hostname(struct connectdata *conn, struct hostname *host)
{
/* set the name we use to display the host name */
host->dispname = host->name;
#ifdef USE_LIBIDN
/*************************************************************
* Check name for non-ASCII and convert hostname to ACE form.
*************************************************************/
if (!is_ASCII_name(host->name) &&
stringprep_check_version(LIBIDN_REQUIRED_VERSION)) {
char *ace_hostname = NULL;
struct SessionHandle *data = conn->data;
int rc = idna_to_ascii_lz(host->name, &ace_hostname, 0);
infof (data, "Input domain encoded as `%s'\n",
stringprep_locale_charset ());
if (rc != IDNA_SUCCESS)
infof(data, "Failed to convert %s to ACE; IDNA error %d\n",
host->name, rc);
else {
host->encalloc = ace_hostname;
/* change the name pointer to point to the encoded hostname */
host->name = host->encalloc;
}
}
#else
(void)conn; /* never used */
#endif
}
/**
* CreateConnection() sets up a new connectdata struct, or re-uses an already
* existing one, and resolves host name.
*
* if this function returns CURLE_OK and *async is set to TRUE, the resolve
* response will be coming asynchronously. If *async is FALSE, the name is
* already resolved.
*
* @param data The sessionhandle pointer
* @param in_connect is set to the next connection data pointer
* @param addr is set to the new dns entry for this connection
* @param async is set TRUE/FALSE depending on the nature of this lookup
* @return CURLcode
* @see SetupConnection()
*/
2003-01-07 05:13:39 +03:00
static CURLcode CreateConnection(struct SessionHandle *data,
2004-10-05 17:34:20 +04:00
struct connectdata **in_connect,
struct Curl_dns_entry **addr,
bool *async)
2003-01-07 05:13:39 +03:00
{
char *tmp;
CURLcode result=CURLE_OK;
struct connectdata *conn;
struct connectdata *conn_temp;
2004-10-05 17:34:20 +04:00
size_t urllen;
2003-01-10 07:26:37 +03:00
struct Curl_dns_entry *hostaddr;
2004-10-05 17:34:20 +04:00
#if defined(HAVE_ALARM) && !defined(USE_ARES)
2003-01-10 07:26:37 +03:00
unsigned int prev_alarm=0;
2003-01-07 05:13:39 +03:00
#endif
2003-01-10 07:26:37 +03:00
char endbracket;
2004-10-05 17:34:20 +04:00
char user[MAX_CURL_USER_LENGTH];
char passwd[MAX_CURL_PASSWORD_LENGTH];
int rc;
bool reuse;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
#ifndef USE_ARES
#ifdef SIGALRM
2003-01-07 05:13:39 +03:00
#ifdef HAVE_SIGACTION
struct sigaction keep_sigact; /* store the old struct here */
2003-01-10 07:26:37 +03:00
bool keep_copysig=FALSE; /* did copy it? */
2003-01-07 05:13:39 +03:00
#else
#ifdef HAVE_SIGNAL
void *keep_sigact; /* store the old handler here */
2004-10-05 17:34:20 +04:00
#endif /* HAVE_SIGNAL */
#endif /* HAVE_SIGACTION */
#endif /* SIGALRM */
#endif /* USE_ARES */
*addr = NULL; /* nothing yet */
*async = FALSE;
2003-01-07 05:13:39 +03:00
/*************************************************************
* Check input data
*************************************************************/
if(!data->change.url)
return CURLE_URL_MALFORMAT;
/* First, split up the current URL in parts so that we can use the
parts for checking against the already present connections. In order
to not have to modify everything at once, we allocate a temporary
connection data struct and fill in for comparison purposes. */
conn = (struct connectdata *)malloc(sizeof(struct connectdata));
if(!conn) {
*in_connect = NULL; /* clear the pointer */
return CURLE_OUT_OF_MEMORY;
}
/* We must set the return variable as soon as possible, so that our
parent can cleanup any possible allocs we may have done before
any failure */
*in_connect = conn;
/* we have to init the struct */
memset(conn, 0, sizeof(struct connectdata));
/* and we setup a few fields in case we end up actually using this struct */
conn->data = data; /* remember our daddy */
2004-10-05 17:34:20 +04:00
conn->sock[FIRSTSOCKET] = CURL_SOCKET_BAD; /* no file descriptor */
conn->sock[SECONDARYSOCKET] = CURL_SOCKET_BAD; /* no file descriptor */
2003-01-07 05:13:39 +03:00
conn->connectindex = -1; /* no index */
2004-10-05 17:34:20 +04:00
conn->bits.httpproxy = (data->change.proxy && *data->change.proxy &&
2003-01-10 07:26:37 +03:00
(data->set.proxytype == CURLPROXY_HTTP))?
2004-10-05 17:34:20 +04:00
TRUE:FALSE; /* http proxy or not */
2003-01-07 05:13:39 +03:00
/* Default protocol-independent behavior doesn't support persistant
connections, so we set this to force-close. Protocols that support
this need to set this to FALSE in their "curl_do" functions. */
2004-10-05 17:34:20 +04:00
conn->bits.close = TRUE;
2003-01-07 05:13:39 +03:00
/* maxdownload must be -1 on init, as 0 is a valid value! */
conn->maxdownload = -1; /* might have been used previously! */
/* Store creation time to help future close decision making */
conn->created = Curl_tvnow();
2004-10-05 17:34:20 +04:00
conn->bits.use_range = data->set.set_range?TRUE:FALSE; /* range status */
conn->range = data->set.set_range; /* clone the range setting */
conn->resume_from = data->set.set_resume_from; /* inherite resume_from */
2003-01-10 07:26:37 +03:00
/* Set the start time temporary to this creation time to allow easier
timeout checks before the transfer has started for real. The start time
is later set "for real" using Curl_pgrsStartNow(). */
2004-10-05 17:34:20 +04:00
conn->data->progress.start = conn->created;
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
conn->bits.user_passwd = data->set.userpwd?1:0;
conn->bits.proxy_user_passwd = data->set.proxyuserpwd?1:0;
conn->bits.no_body = data->set.opt_no_body;
conn->bits.tunnel_proxy = data->set.tunnel_thru_httpproxy;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
/* This initing continues below, see the comment "Continue connectdata
* initialization here" */
2003-01-14 17:12:37 +03:00
2003-01-07 05:13:39 +03:00
/***********************************************************
* We need to allocate memory to store the path in. We get the size of the
* full URL to be sure, and we need to make it at least 256 bytes since
* other parts of the code will rely on this fact
***********************************************************/
#define LEAST_PATH_ALLOC 256
2004-10-05 17:34:20 +04:00
urllen=strlen(data->change.url);
2003-01-07 05:13:39 +03:00
if(urllen < LEAST_PATH_ALLOC)
urllen=LEAST_PATH_ALLOC;
2004-10-05 17:34:20 +04:00
conn->pathbuffer=(char *)malloc(urllen);
if(NULL == conn->pathbuffer)
2003-01-07 05:13:39 +03:00
return CURLE_OUT_OF_MEMORY; /* really bad error */
2004-10-05 17:34:20 +04:00
conn->path = conn->pathbuffer;
conn->host.rawalloc=(char *)malloc(urllen);
if(NULL == conn->host.rawalloc)
return CURLE_OUT_OF_MEMORY;
conn->host.name = conn->host.rawalloc;
2003-01-07 05:13:39 +03:00
/*************************************************************
* Parse the URL.
*
* We need to parse the url even when using the proxy, because we will need
* the hostname and port in case we are trying to SSL connect through the
* proxy -- and we don't know if we will need to use SSL until we parse the
* url ...
************************************************************/
2004-10-05 17:34:20 +04:00
if((2 == sscanf(data->change.url, "%15[^:]:%[^\n]",
2003-01-07 05:13:39 +03:00
conn->protostr,
conn->path)) && strequal(conn->protostr, "file")) {
2004-10-05 17:34:20 +04:00
if(conn->path[0] == '/' && conn->path[1] == '/') {
/* Allow omitted hostname (e.g. file:/<path>). This is not strictly
* speaking a valid file: URL by RFC 1738, but treating file:/<path> as
* file://localhost/<path> is similar to how other schemes treat missing
* hostnames. See RFC 1808. */
/* This cannot be done with strcpy() in a portable manner, since the
memory areas overlap! */
memmove(conn->path, conn->path + 2, strlen(conn->path + 2)+1);
}
2003-01-07 05:13:39 +03:00
/*
* we deal with file://<host>/<path> differently since it supports no
* hostname other than "localhost" and "127.0.0.1", which is unique among
* the URL protocols specified in RFC 1738
*/
if(conn->path[0] != '/') {
/* the URL included a host name, we ignore host names in file:// URLs
as the standards don't define what to do with them */
char *ptr=strchr(conn->path, '/');
if(ptr) {
/* there was a slash present
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
RFC1738 (section 3.1, page 5) says:
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
The rest of the locator consists of data specific to the scheme,
and is known as the "url-path". It supplies the details of how the
specified resource can be accessed. Note that the "/" between the
host (or port) and the url-path is NOT part of the url-path.
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
As most agents use file://localhost/foo to get '/foo' although the
slash preceeding foo is a separator and not a slash for the path,
a URL as file://localhost//foo must be valid as well, to refer to
the same file with an absolute path.
*/
if(ptr[1] && ('/' == ptr[1]))
/* if there was two slashes, we skip the first one as that is then
used truly as a separator */
2004-10-05 17:34:20 +04:00
ptr++;
/* This cannot be made with strcpy, as the memory chunks overlap! */
memmove(conn->path, ptr, strlen(ptr)+1);
2003-01-07 05:13:39 +03:00
}
}
strcpy(conn->protostr, "file"); /* store protocol string lowercase */
}
else {
2004-10-05 17:34:20 +04:00
/* Set default path */
2003-01-07 05:13:39 +03:00
strcpy(conn->path, "/");
2004-10-05 17:34:20 +04:00
/* We need to search for '/' OR '?' - whichever comes first after host
* name but before the path. We need to change that to handle things like
* http://example.com?param= (notice the missing '/'). Later we'll insert
* that missing slash at the beginning of the path.
*/
2003-01-07 05:13:39 +03:00
if (2 > sscanf(data->change.url,
2004-10-05 17:34:20 +04:00
"%15[^\n:]://%[^\n/?]%[^\n]",
conn->protostr,
conn->host.name, conn->path)) {
2003-01-07 05:13:39 +03:00
/*
* The URL was badly formatted, let's try the browser-style _without_
* protocol specified like 'http://'.
*/
2004-10-05 17:34:20 +04:00
if((1 > sscanf(data->change.url, "%[^\n/?]%[^\n]",
conn->host.name, conn->path)) ) {
2003-01-07 05:13:39 +03:00
/*
* We couldn't even get this format.
*/
failf(data, "<url> malformed");
return CURLE_URL_MALFORMAT;
}
/*
* Since there was no protocol part specified, we guess what protocol it
* is based on the first letters of the server name.
*/
2003-01-10 07:26:37 +03:00
/* Note: if you add a new protocol, please update the list in
* lib/version.c too! */
2004-10-05 17:34:20 +04:00
if(checkprefix("GOPHER", conn->host.name))
2003-01-07 05:13:39 +03:00
strcpy(conn->protostr, "gopher");
#ifdef USE_SSLEAY
2004-10-05 17:34:20 +04:00
else if(checkprefix("HTTPS", conn->host.name))
2003-01-07 05:13:39 +03:00
strcpy(conn->protostr, "https");
2004-10-05 17:34:20 +04:00
else if(checkprefix("FTPS", conn->host.name))
2003-01-07 05:13:39 +03:00
strcpy(conn->protostr, "ftps");
#endif /* USE_SSLEAY */
2004-10-05 17:34:20 +04:00
else if(checkprefix("FTP", conn->host.name))
strcpy(conn->protostr, "ftp");
else if(checkprefix("TELNET", conn->host.name))
2003-01-07 05:13:39 +03:00
strcpy(conn->protostr, "telnet");
2004-10-05 17:34:20 +04:00
else if (checkprefix("DICT", conn->host.name))
2003-01-07 05:13:39 +03:00
strcpy(conn->protostr, "DICT");
2004-10-05 17:34:20 +04:00
else if (checkprefix("LDAP", conn->host.name))
2003-01-07 05:13:39 +03:00
strcpy(conn->protostr, "LDAP");
else {
strcpy(conn->protostr, "http");
}
conn->protocol |= PROT_MISSING; /* not given in URL */
}
}
2004-10-05 17:34:20 +04:00
/* If the URL is malformatted (missing a '/' after hostname before path) we
* insert a slash here. The only letter except '/' we accept to start a path
* is '?'.
*/
if(conn->path[0] == '?') {
/* We need this function to deal with overlapping memory areas. We know
that the memory area 'path' points to is 'urllen' bytes big and that
is bigger than the path. Use +1 to move the zero byte too. */
memmove(&conn->path[1], conn->path, strlen(conn->path)+1);
conn->path[0] = '/';
}
2003-01-07 05:13:39 +03:00
2003-01-10 07:26:37 +03:00
/*
* So if the URL was A://B/C,
* conn->protostr is A
2004-10-05 17:34:20 +04:00
* conn->host.name is B
2003-01-10 07:26:37 +03:00
* conn->path is /C
*/
2003-01-07 05:13:39 +03:00
/*************************************************************
* Take care of proxy authentication stuff
*************************************************************/
if(conn->bits.proxy_user_passwd) {
2004-10-05 17:34:20 +04:00
char proxyuser[MAX_CURL_USER_LENGTH]="";
char proxypasswd[MAX_CURL_PASSWORD_LENGTH]="";
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
sscanf(data->set.proxyuserpwd,
"%" MAX_CURL_USER_LENGTH_TXT "[^:]:"
"%" MAX_CURL_PASSWORD_LENGTH_TXT "[^\n]",
proxyuser, proxypasswd);
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
conn->proxyuser = strdup(proxyuser);
if(!conn->proxyuser)
return CURLE_OUT_OF_MEMORY;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
conn->proxypasswd = strdup(proxypasswd);
if(!conn->proxypasswd)
return CURLE_OUT_OF_MEMORY;
}
2003-01-07 05:13:39 +03:00
/*************************************************************
* Detect what (if any) proxy to use
*************************************************************/
if(!data->change.proxy) {
/* If proxy was not specified, we check for default proxy environment
* variables, to enable i.e Lynx compliance:
*
* http_proxy=http://some.server.dom:port/
* https_proxy=http://some.server.dom:port/
* ftp_proxy=http://some.server.dom:port/
* gopher_proxy=http://some.server.dom:port/
* no_proxy=domain1.dom,host.domain2.dom
* (a comma-separated list of hosts which should
* not be proxied, or an asterisk to override
* all proxy variables)
* all_proxy=http://some.server.dom:port/
* (seems to exist for the CERN www lib. Probably
* the first to check for.)
*
* For compatibility, the all-uppercase versions of these variables are
* checked if the lowercase versions don't exist.
*/
char *no_proxy=NULL;
char *no_proxy_tok_buf;
char *proxy=NULL;
char proxy_env[128];
no_proxy=curl_getenv("no_proxy");
if(!no_proxy)
no_proxy=curl_getenv("NO_PROXY");
if(!no_proxy || !strequal("*", no_proxy)) {
/* NO_PROXY wasn't specified or it wasn't just an asterisk */
char *nope;
nope=no_proxy?strtok_r(no_proxy, ", ", &no_proxy_tok_buf):NULL;
while(nope) {
2004-10-05 17:34:20 +04:00
size_t namelen;
char *endptr = strchr(conn->host.name, ':');
2003-01-10 07:26:37 +03:00
if(endptr)
2004-10-05 17:34:20 +04:00
namelen=endptr-conn->host.name;
2003-01-10 07:26:37 +03:00
else
2004-10-05 17:34:20 +04:00
namelen=strlen(conn->host.name);
2003-01-10 07:26:37 +03:00
if(strlen(nope) <= namelen) {
2003-01-07 05:13:39 +03:00
char *checkn=
2004-10-05 17:34:20 +04:00
conn->host.name + namelen - strlen(nope);
2003-01-10 07:26:37 +03:00
if(checkprefix(nope, checkn)) {
2003-01-07 05:13:39 +03:00
/* no proxy for this host! */
break;
}
}
nope=strtok_r(NULL, ", ", &no_proxy_tok_buf);
}
if(!nope) {
/* It was not listed as without proxy */
char *protop = conn->protostr;
char *envp = proxy_env;
char *prox;
/* Now, build <protocol>_proxy and check for such a one to use */
while(*protop)
2004-10-05 17:34:20 +04:00
*envp++ = tolower((int)*protop++);
2003-01-07 05:13:39 +03:00
/* append _proxy */
strcpy(envp, "_proxy");
/* read the protocol proxy: */
prox=curl_getenv(proxy_env);
/*
* We don't try the uppercase version of HTTP_PROXY because of
* security reasons:
*
* When curl is used in a webserver application
* environment (cgi or php), this environment variable can
* be controlled by the web server user by setting the
* http header 'Proxy:' to some value.
2004-10-05 17:34:20 +04:00
*
2003-01-07 05:13:39 +03:00
* This can cause 'internal' http/ftp requests to be
* arbitrarily redirected by any external attacker.
*/
if(!prox && !strequal("http_proxy", proxy_env)) {
/* There was no lowercase variable, try the uppercase version: */
for(envp = proxy_env; *envp; envp++)
2004-10-05 17:34:20 +04:00
*envp = toupper((int)*envp);
2003-01-07 05:13:39 +03:00
prox=curl_getenv(proxy_env);
}
if(prox && *prox) { /* don't count "" strings */
proxy = prox; /* use this */
}
else {
proxy = curl_getenv("all_proxy"); /* default proxy to use */
if(!proxy)
proxy=curl_getenv("ALL_PROXY");
}
if(proxy && *proxy) {
/* we have a proxy here to set */
2004-10-05 17:34:20 +04:00
char *ptr;
char proxyuser[MAX_CURL_USER_LENGTH];
char proxypasswd[MAX_CURL_PASSWORD_LENGTH];
char *fineptr;
/* skip the possible protocol piece */
ptr=strstr(proxy, "://");
if(ptr)
ptr += 3;
else
ptr = proxy;
fineptr = ptr;
/* check for an @-letter */
ptr = strchr(ptr, '@');
if(ptr && (2 == sscanf(fineptr,
"%" MAX_CURL_USER_LENGTH_TXT"[^:]:"
"%" MAX_CURL_PASSWORD_LENGTH_TXT "[^@]",
proxyuser, proxypasswd))) {
CURLcode res = CURLE_OK;
/* found user and password, rip them out */
Curl_safefree(conn->proxyuser);
conn->proxyuser = strdup(proxyuser);
if(!conn->proxyuser)
res = CURLE_OUT_OF_MEMORY;
else {
Curl_safefree(conn->proxypasswd);
conn->proxypasswd = strdup(proxypasswd);
if(!conn->proxypasswd)
res = CURLE_OUT_OF_MEMORY;
}
if(CURLE_OK == res) {
conn->bits.proxy_user_passwd = TRUE; /* enable it */
ptr = strdup(ptr+1); /* the right side of the @-letter */
if(ptr) {
free(proxy); /* free the former proxy string */
proxy = ptr; /* now use this instead */
}
else
res = CURLE_OUT_OF_MEMORY;
}
if(res) {
free(proxy); /* free the allocated proxy string */
return res;
}
}
2003-01-07 05:13:39 +03:00
data->change.proxy = proxy;
data->change.proxy_alloc=TRUE; /* this needs to be freed later */
conn->bits.httpproxy = TRUE;
}
} /* if (!nope) - it wasn't specified non-proxy */
} /* NO_PROXY wasn't specified or '*' */
if(no_proxy)
free(no_proxy);
} /* if not using proxy */
/*************************************************************
* No protocol part in URL was used, add it!
*************************************************************/
if(conn->protocol&PROT_MISSING) {
/* We're guessing prefixes here and if we're told to use a proxy or if
we're gonna follow a Location: later or... then we need the protocol
part added so that we have a valid URL. */
char *reurl;
reurl = aprintf("%s://%s", conn->protostr, data->change.url);
if(!reurl)
return CURLE_OUT_OF_MEMORY;
data->change.url = reurl;
data->change.url_alloc = TRUE; /* free this later */
conn->protocol &= ~PROT_MISSING; /* switch that one off again */
}
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_HTTP
2003-01-07 05:13:39 +03:00
/************************************************************
* RESUME on a HTTP page is a tricky business. First, let's just check that
* 'range' isn't used, then set the range parameter and leave the resume as
* it is to inform about this situation for later use. We will then
* "attempt" to resume, and if we're talking to a HTTP/1.1 (or later)
* server, we will get the document resumed. If we talk to a HTTP/1.0
* server, we just fail since we can't rewind the file writing from within
* this function.
***********************************************************/
if(conn->resume_from) {
if(!conn->bits.use_range) {
/* if it already was in use, we just skip this */
2004-10-05 17:34:20 +04:00
conn->range = aprintf("%" FORMAT_OFF_T "-", conn->resume_from);
if(!conn->range)
return CURLE_OUT_OF_MEMORY;
2003-01-07 05:13:39 +03:00
conn->bits.rangestringalloc = TRUE; /* mark as allocated */
conn->bits.use_range = 1; /* switch on range usage */
}
}
2003-01-10 07:26:37 +03:00
#endif
2003-01-07 05:13:39 +03:00
/*************************************************************
* Setup internals depending on protocol
*************************************************************/
if (strequal(conn->protostr, "HTTP")) {
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_HTTP
2003-01-07 05:13:39 +03:00
conn->port = (data->set.use_port && data->state.allow_port)?
data->set.use_port:PORT_HTTP;
conn->remote_port = PORT_HTTP;
conn->protocol |= PROT_HTTP;
conn->curl_do = Curl_http;
2003-01-10 07:26:37 +03:00
conn->curl_do_more = NULL;
2003-01-07 05:13:39 +03:00
conn->curl_done = Curl_http_done;
conn->curl_connect = Curl_http_connect;
2003-01-10 07:26:37 +03:00
#else
failf(data, LIBCURL_NAME
" was built with HTTP disabled, http: not supported!");
return CURLE_UNSUPPORTED_PROTOCOL;
#endif
2003-01-07 05:13:39 +03:00
}
else if (strequal(conn->protostr, "HTTPS")) {
2003-01-10 07:26:37 +03:00
#if defined(USE_SSLEAY) && !defined(CURL_DISABLE_HTTP)
2003-01-07 05:13:39 +03:00
conn->port = (data->set.use_port && data->state.allow_port)?
data->set.use_port:PORT_HTTPS;
conn->remote_port = PORT_HTTPS;
conn->protocol |= PROT_HTTP|PROT_HTTPS|PROT_SSL;
conn->curl_do = Curl_http;
2003-01-10 07:26:37 +03:00
conn->curl_do_more = NULL;
2003-01-07 05:13:39 +03:00
conn->curl_done = Curl_http_done;
conn->curl_connect = Curl_http_connect;
#else /* USE_SSLEAY */
failf(data, LIBCURL_NAME
" was built with SSL disabled, https: not supported!");
return CURLE_UNSUPPORTED_PROTOCOL;
#endif /* !USE_SSLEAY */
}
else if (strequal(conn->protostr, "GOPHER")) {
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_GOPHER
2003-01-07 05:13:39 +03:00
conn->port = (data->set.use_port && data->state.allow_port)?
data->set.use_port:PORT_GOPHER;
conn->remote_port = PORT_GOPHER;
/* Skip /<item-type>/ in path if present */
if (isdigit((int)conn->path[1])) {
2004-10-05 17:34:20 +04:00
conn->path = strchr(&conn->path[1], '/');
if (conn->path == NULL)
conn->path = conn->pathbuffer;
}
2003-01-07 05:13:39 +03:00
conn->protocol |= PROT_GOPHER;
conn->curl_do = Curl_http;
2003-01-10 07:26:37 +03:00
conn->curl_do_more = NULL;
2003-01-07 05:13:39 +03:00
conn->curl_done = Curl_http_done;
2003-01-10 07:26:37 +03:00
#else
failf(data, LIBCURL_NAME
" was built with GOPHER disabled, gopher: not supported!");
#endif
2003-01-07 05:13:39 +03:00
}
else if(strequal(conn->protostr, "FTP") ||
strequal(conn->protostr, "FTPS")) {
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_FTP
2003-01-07 05:13:39 +03:00
char *type;
2004-10-05 17:34:20 +04:00
int port = PORT_FTP;
2003-01-07 05:13:39 +03:00
if(strequal(conn->protostr, "FTPS")) {
#ifdef USE_SSLEAY
conn->protocol |= PROT_FTPS|PROT_SSL;
2004-10-05 17:34:20 +04:00
conn->ssl[SECONDARYSOCKET].use = TRUE; /* send data securely */
port = PORT_FTPS;
2003-01-07 05:13:39 +03:00
#else
failf(data, LIBCURL_NAME
" was built with SSL disabled, ftps: not supported!");
return CURLE_UNSUPPORTED_PROTOCOL;
#endif /* !USE_SSLEAY */
}
conn->port = (data->set.use_port && data->state.allow_port)?
2004-10-05 17:34:20 +04:00
data->set.use_port:port;
conn->remote_port = port;
2003-01-07 05:13:39 +03:00
conn->protocol |= PROT_FTP;
if(data->change.proxy &&
2003-01-10 07:26:37 +03:00
*data->change.proxy &&
2003-01-07 05:13:39 +03:00
!data->set.tunnel_thru_httpproxy) {
/* Unless we have asked to tunnel ftp operations through the proxy, we
switch and use HTTP operations only */
if(conn->protocol & PROT_FTPS) {
/* FTPS is a hacked protocol and does not work through your
ordinary http proxy! */
failf(data, "ftps does not work through http proxy!");
return CURLE_UNSUPPORTED_PROTOCOL;
}
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_HTTP
2003-01-07 05:13:39 +03:00
conn->curl_do = Curl_http;
conn->curl_done = Curl_http_done;
2003-01-10 07:26:37 +03:00
#else
failf(data, "FTP over http proxy requires HTTP support built-in!");
return CURLE_UNSUPPORTED_PROTOCOL;
#endif
2003-01-07 05:13:39 +03:00
}
else {
conn->curl_do = Curl_ftp;
2003-01-10 07:26:37 +03:00
conn->curl_do_more = Curl_ftp_nextconnect;
2003-01-07 05:13:39 +03:00
conn->curl_done = Curl_ftp_done;
conn->curl_connect = Curl_ftp_connect;
conn->curl_disconnect = Curl_ftp_disconnect;
}
2004-10-05 17:34:20 +04:00
conn->path++; /* don't include the initial slash */
2003-01-07 05:13:39 +03:00
/* FTP URLs support an extension like ";type=<typecode>" that
* we'll try to get now! */
2004-10-05 17:34:20 +04:00
type=strstr(conn->path, ";type=");
2003-01-07 05:13:39 +03:00
if(!type) {
2004-10-05 17:34:20 +04:00
type=strstr(conn->host.rawalloc, ";type=");
2003-01-07 05:13:39 +03:00
}
if(type) {
char command;
2003-01-10 07:26:37 +03:00
*type=0; /* it was in the middle of the hostname */
2004-10-05 17:34:20 +04:00
command = toupper((int)type[6]);
2003-01-07 05:13:39 +03:00
switch(command) {
case 'A': /* ASCII mode */
data->set.ftp_ascii = 1;
break;
case 'D': /* directory mode */
data->set.ftp_list_only = 1;
break;
case 'I': /* binary mode */
default:
/* switch off ASCII */
data->set.ftp_ascii = 0;
break;
}
}
2003-01-10 07:26:37 +03:00
#else /* CURL_DISABLE_FTP */
failf(data, LIBCURL_NAME
" was built with FTP disabled, ftp/ftps: not supported!");
return CURLE_UNSUPPORTED_PROTOCOL;
#endif
2003-01-07 05:13:39 +03:00
}
else if(strequal(conn->protostr, "TELNET")) {
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_TELNET
2003-01-07 05:13:39 +03:00
/* telnet testing factory */
conn->protocol |= PROT_TELNET;
conn->port = (data->set.use_port && data->state.allow_port)?
data->set.use_port: PORT_TELNET;
conn->remote_port = PORT_TELNET;
conn->curl_do = Curl_telnet;
conn->curl_done = Curl_telnet_done;
2003-01-10 07:26:37 +03:00
#else
failf(data, LIBCURL_NAME
" was built with TELNET disabled!");
#endif
2003-01-07 05:13:39 +03:00
}
else if (strequal(conn->protostr, "DICT")) {
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_DICT
2003-01-07 05:13:39 +03:00
conn->protocol |= PROT_DICT;
conn->port = (data->set.use_port && data->state.allow_port)?
data->set.use_port:PORT_DICT;
conn->remote_port = PORT_DICT;
conn->curl_do = Curl_dict;
conn->curl_done = NULL; /* no DICT-specific done */
2003-01-10 07:26:37 +03:00
#else
failf(data, LIBCURL_NAME
" was built with DICT disabled!");
#endif
2003-01-07 05:13:39 +03:00
}
else if (strequal(conn->protostr, "LDAP")) {
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_LDAP
2003-01-07 05:13:39 +03:00
conn->protocol |= PROT_LDAP;
conn->port = (data->set.use_port && data->state.allow_port)?
data->set.use_port:PORT_LDAP;
conn->remote_port = PORT_LDAP;
conn->curl_do = Curl_ldap;
conn->curl_done = NULL; /* no LDAP-specific done */
2003-01-10 07:26:37 +03:00
#else
failf(data, LIBCURL_NAME
" was built with LDAP disabled!");
#endif
2003-01-07 05:13:39 +03:00
}
else if (strequal(conn->protostr, "FILE")) {
2003-01-10 07:26:37 +03:00
#ifndef CURL_DISABLE_FILE
2003-01-07 05:13:39 +03:00
conn->protocol |= PROT_FILE;
conn->curl_do = Curl_file;
2004-10-05 17:34:20 +04:00
conn->curl_done = Curl_file_done;
2003-01-07 05:13:39 +03:00
/* anyway, this is supposed to be the connect function so we better
at least check that the file is present here! */
result = Curl_file_connect(conn);
/* Setup a "faked" transfer that'll do nothing */
if(CURLE_OK == result) {
2003-01-14 17:12:37 +03:00
conn->bits.tcpconnect = TRUE; /* we are "connected */
2003-01-07 05:13:39 +03:00
result = Curl_Transfer(conn, -1, -1, FALSE, NULL, /* no download */
-1, NULL); /* no upload */
}
return result;
2003-01-10 07:26:37 +03:00
#else
failf(data, LIBCURL_NAME
" was built with FILE disabled!");
#endif
2003-01-07 05:13:39 +03:00
}
else {
/* We fell through all checks and thus we don't support the specified
protocol */
failf(data, "Unsupported protocol: %s", conn->protostr);
return CURLE_UNSUPPORTED_PROTOCOL;
}
/*************************************************************
* Figure out the remote port number
*
* No matter if we use a proxy or not, we have to figure out the remote
* port number of various reasons.
*
* To be able to detect port number flawlessly, we must not confuse them
* IPv6-specified addresses in the [0::1] style. (RFC2732)
2003-01-10 07:26:37 +03:00
*
2004-10-05 17:34:20 +04:00
* The conn->host.name is currently [user:passwd@]host[:port] where host
* could be a hostname, IPv4 address or IPv6 address.
2003-01-07 05:13:39 +03:00
*************************************************************/
2004-10-05 17:34:20 +04:00
if((1 == sscanf(conn->host.name, "[%*39[0-9a-fA-F:.]%c", &endbracket)) &&
2003-01-07 05:13:39 +03:00
(']' == endbracket)) {
2003-01-10 07:26:37 +03:00
/* this is a RFC2732-style specified IP-address */
conn->bits.ipv6_ip = TRUE;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
conn->host.name++; /* pass the starting bracket */
tmp = strchr(conn->host.name, ']');
2003-01-07 05:13:39 +03:00
*tmp = 0; /* zero terminate */
tmp++; /* pass the ending bracket */
if(':' != *tmp)
tmp = NULL; /* no port number available */
}
2003-01-10 07:26:37 +03:00
else
2004-10-05 17:34:20 +04:00
tmp = strrchr(conn->host.name, ':');
2003-01-07 05:13:39 +03:00
if (tmp) {
2003-01-10 07:26:37 +03:00
char *rest;
unsigned long port;
port=strtoul(tmp+1, &rest, 10); /* Port number must be decimal */
if (rest != (tmp+1) && *rest == '\0') {
/* The colon really did have only digits after it,
* so it is either a port number or a mistake */
if (port > 0xffff) { /* Single unix standard says port numbers are
* 16 bits long */
failf(data, "Port number too large: %lu", port);
return CURLE_URL_MALFORMAT;
}
*tmp = '\0'; /* cut off the name there */
conn->remote_port = (unsigned short)port;
}
2003-01-07 05:13:39 +03:00
}
2003-01-10 07:26:37 +03:00
if(data->change.proxy && *data->change.proxy) {
2003-01-07 05:13:39 +03:00
/* If this is supposed to use a proxy, we need to figure out the proxy
host name name, so that we can re-use an existing connection
that may exist registered to the same proxy host. */
char *prox_portno;
char *endofprot;
/* We need to make a duplicate of the proxy so that we can modify the
string safely. */
char *proxydup=strdup(data->change.proxy);
/* We use 'proxyptr' to point to the proxy name from now on... */
char *proxyptr=proxydup;
if(NULL == proxydup) {
failf(data, "memory shortage");
return CURLE_OUT_OF_MEMORY;
}
/* Daniel Dec 10, 1998:
We do the proxy host string parsing here. We want the host name and the
port name. Accept a protocol:// prefix, even though it should just be
ignored. */
/* 1. skip the protocol part if present */
endofprot=strstr(proxyptr, "://");
if(endofprot) {
proxyptr = endofprot+3;
}
/* allow user to specify proxy.server.com:1080 if desired */
prox_portno = strchr (proxyptr, ':');
if (prox_portno) {
*prox_portno = 0x0; /* cut off number from host name */
prox_portno ++;
/* now set the local port number */
conn->port = atoi(prox_portno);
}
else if(data->set.proxyport) {
/* None given in the proxy string, then get the default one if it is
given */
conn->port = data->set.proxyport;
}
/* now, clone the cleaned proxy host name */
2004-10-05 17:34:20 +04:00
conn->proxy.rawalloc = strdup(proxyptr);
conn->proxy.name = conn->proxy.rawalloc;
2003-01-07 05:13:39 +03:00
free(proxydup); /* free the duplicate pointer and not the modified */
2004-10-05 17:34:20 +04:00
if(!conn->proxy.rawalloc)
return CURLE_OUT_OF_MEMORY;
2003-01-07 05:13:39 +03:00
}
2004-10-05 17:34:20 +04:00
/*************************************************************
* If the protcol is using SSL and HTTP proxy is used, we set
* the tunnel_proxy bit.
*************************************************************/
if((conn->protocol&PROT_SSL) && conn->bits.httpproxy)
conn->bits.tunnel_proxy = TRUE;
2003-01-10 07:26:37 +03:00
/*************************************************************
* Take care of user and password authentication stuff
*************************************************************/
/*
* Inputs: data->set.userpwd (CURLOPT_USERPWD)
* data->set.fpasswd (CURLOPT_PASSWDFUNCTION)
* data->set.use_netrc (CURLOPT_NETRC)
2004-10-05 17:34:20 +04:00
* conn->host.name
2003-01-10 07:26:37 +03:00
* netrc file
* hard-coded defaults
*
* Outputs: (almost :- all currently undefined)
* conn->bits.user_passwd - non-zero if non-default passwords exist
2004-10-05 17:34:20 +04:00
* conn->user - non-zero length if defined
* conn->passwd - ditto
* conn->host.name - remove user name and password
2003-01-10 07:26:37 +03:00
*/
/* At this point, we're hoping all the other special cases have
2004-10-05 17:34:20 +04:00
* been taken care of, so conn->host.name is at most
2003-01-10 07:26:37 +03:00
* [user[:password]]@]hostname
*
* We need somewhere to put the embedded details, so do that first.
*/
2004-10-05 17:34:20 +04:00
user[0] =0; /* to make everything well-defined */
passwd[0]=0;
2003-01-10 07:26:37 +03:00
if (conn->protocol & (PROT_FTP|PROT_HTTP)) {
/* This is a FTP or HTTP URL, we will now try to extract the possible
* user+password pair in a string like:
* ftp://user:password@ftp.my.site:8021/README */
2004-10-05 17:34:20 +04:00
char *ptr=strchr(conn->host.name, '@');
char *userpass = conn->host.name;
2003-01-10 07:26:37 +03:00
if(ptr != NULL) {
/* there's a user+password given here, to the left of the @ */
2004-10-05 17:34:20 +04:00
conn->host.name = ++ptr;
2003-01-10 07:26:37 +03:00
/* So the hostname is sane. Only bother interpreting the
* results if we could care. It could still be wasted
* work because it might be overtaken by the programmatically
* set user/passwd, but doing that first adds more cases here :-(
*/
if (data->set.use_netrc != CURL_NETRC_REQUIRED) {
/* We could use the one in the URL */
conn->bits.user_passwd = 1; /* enable user+password */
if(*userpass != ':') {
/* the name is given, get user+password */
sscanf(userpass, "%127[^:@]:%127[^@]",
2004-10-05 17:34:20 +04:00
user, passwd);
2003-01-10 07:26:37 +03:00
}
else
/* no name given, get the password only */
2004-10-05 17:34:20 +04:00
sscanf(userpass, ":%127[^@]", passwd);
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
if(user[0]) {
char *newname=curl_unescape(user, 0);
if(!newname)
return CURLE_OUT_OF_MEMORY;
if(strlen(newname) < sizeof(user))
strcpy(user, newname);
2003-01-14 17:12:37 +03:00
2003-01-10 07:26:37 +03:00
/* if the new name is longer than accepted, then just use
the unconverted name, it'll be wrong but what the heck */
free(newname);
}
2004-10-05 17:34:20 +04:00
if (passwd[0]) {
2003-01-10 07:26:37 +03:00
/* we have a password found in the URL, decode it! */
2004-10-05 17:34:20 +04:00
char *newpasswd=curl_unescape(passwd, 0);
if(!newpasswd)
return CURLE_OUT_OF_MEMORY;
if(strlen(newpasswd) < sizeof(passwd))
strcpy(passwd, newpasswd);
2003-01-10 07:26:37 +03:00
free(newpasswd);
}
}
}
}
/* Programmatically set password:
* - always applies, if available
* - takes precedence over the values we just set above
* so scribble it over the top.
* User-supplied passwords are assumed not to need unescaping.
*
* user_password is set in "inherite initial knowledge' above,
* so it doesn't have to be set in this block
*/
if (data->set.userpwd != NULL) {
2004-10-05 17:34:20 +04:00
/* the name is given, get user+password */
sscanf(data->set.userpwd,
"%" MAX_CURL_USER_LENGTH_TXT "[^:]:"
"%" MAX_CURL_PASSWORD_LENGTH_TXT "[^\n]",
user, passwd);
}
if (data->set.use_netrc != CURL_NETRC_IGNORED) {
if(Curl_parsenetrc(conn->host.name,
user, passwd,
data->set.netrc_file)) {
infof(data, "Couldn't find host %s in the .netrc file, using defaults\n",
conn->host.name);
2003-01-10 07:26:37 +03:00
}
else
conn->bits.user_passwd = 1; /* enable user+password */
}
/* If our protocol needs a password and we have none, use the defaults */
2004-10-05 17:34:20 +04:00
if ( (conn->protocol & PROT_FTP) &&
!conn->bits.user_passwd) {
2003-01-14 17:12:37 +03:00
2004-10-05 17:34:20 +04:00
conn->user = strdup(CURL_DEFAULT_USER);
conn->passwd = strdup(CURL_DEFAULT_PASSWORD);
2003-01-10 07:26:37 +03:00
/* This is the default password, so DON'T set conn->bits.user_passwd */
}
2004-10-05 17:34:20 +04:00
else {
/* store user + password, zero-length if not set */
conn->user = strdup(user);
conn->passwd = strdup(passwd);
}
if(!conn->user || !conn->passwd)
return CURLE_OUT_OF_MEMORY;
2003-01-10 07:26:37 +03:00
2003-01-07 05:13:39 +03:00
/*************************************************************
* Check the current list of connections to see if we can
* re-use an already existing one or if we have to create a
* new one.
*************************************************************/
2004-10-05 17:34:20 +04:00
/* get a cloned copy of the SSL config situation stored in the
connection struct */
if(!Curl_clone_ssl_config(&data->set.ssl, &conn->ssl_config))
return CURLE_OUT_OF_MEMORY;
/* reuse_fresh is TRUE if we are told to use a new connection by force, but
we only acknowledge this option if this is not a re-used connection
already (which happens due to follow-location or during a HTTP
authentication phase). */
if(data->set.reuse_fresh && !data->state.this_is_a_follow)
reuse = FALSE;
else
reuse = ConnectionExists(data, conn, &conn_temp);
if(reuse) {
2003-01-07 05:13:39 +03:00
/*
* We already have a connection for this, we got the former connection
* in the conn_temp variable and thus we need to cleanup the one we
* just allocated before we can move along and use the previously
* existing one.
*/
struct connectdata *old_conn = conn;
2004-10-05 17:34:20 +04:00
if(old_conn->proxy.rawalloc)
free(old_conn->proxy.rawalloc);
/* free the SSL config struct from this connection struct as this was
allocated in vain and is targeted for destruction */
Curl_free_ssl_config(&conn->ssl_config);
2003-01-07 05:13:39 +03:00
conn = conn_temp; /* use this connection from now on */
2004-10-05 17:34:20 +04:00
/* get the user+password information from the old_conn struct since it may
* be new for this request even when we re-use an existing connection */
conn->bits.user_passwd = old_conn->bits.user_passwd;
conn->bits.proxy_user_passwd = old_conn->bits.proxy_user_passwd;
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
/* host can change, when doing keepalive with a proxy ! */
if (conn->bits.httpproxy) {
free(conn->host.rawalloc);
conn->host=old_conn->host;
}
/* get the newly set value, not the old one */
conn->bits.no_body = old_conn->bits.no_body;
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
if (!conn->bits.httpproxy)
free(old_conn->host.rawalloc); /* free the newly allocated name buffer */
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
free(conn->pathbuffer); /* free the newly allocated path pointer */
conn->pathbuffer = old_conn->pathbuffer; /* use the old one */
conn->path = old_conn->path;
2003-01-07 05:13:39 +03:00
/* re-use init */
conn->bits.reuse = TRUE; /* yes, we're re-using here */
conn->bits.chunk = FALSE; /* always assume not chunked unless told
otherwise */
conn->maxdownload = -1; /* might have been used previously! */
2004-10-05 17:34:20 +04:00
Curl_safefree(old_conn->user);
Curl_safefree(old_conn->passwd);
Curl_safefree(old_conn->proxyuser);
Curl_safefree(old_conn->proxypasswd);
if(old_conn->bits.rangestringalloc)
free(old_conn->range);
2003-01-07 05:13:39 +03:00
free(old_conn); /* we don't need this anymore */
/*
* If we're doing a resumed transfer, we need to setup our stuff
* properly.
*/
conn->resume_from = data->set.set_resume_from;
if (conn->resume_from) {
2004-10-05 17:34:20 +04:00
if (conn->bits.rangestringalloc == TRUE)
free(conn->range);
conn->range = aprintf("%" FORMAT_OFF_T "-", conn->resume_from);
if(!conn->range)
return CURLE_OUT_OF_MEMORY;
/* tell ourselves to fetch this range */
conn->bits.use_range = TRUE; /* enable range download */
conn->bits.rangestringalloc = TRUE; /* mark range string allocated */
2003-01-07 05:13:39 +03:00
}
else if (data->set.set_range) {
/* There is a range, but is not a resume, useful for random ftp access */
conn->range = strdup(data->set.set_range);
2004-10-05 17:34:20 +04:00
if(!conn->range)
return CURLE_OUT_OF_MEMORY;
2003-01-07 05:13:39 +03:00
conn->bits.rangestringalloc = TRUE; /* mark range string allocated */
conn->bits.use_range = TRUE; /* enable range download */
}
2004-10-05 17:34:20 +04:00
else
conn->bits.use_range = FALSE; /* disable range download */
2003-01-07 05:13:39 +03:00
*in_connect = conn; /* return this instead! */
2004-10-05 17:34:20 +04:00
infof(data, "Re-using existing connection! (#%ld) with host %s\n",
conn->connectindex,
conn->bits.httpproxy?conn->proxy.dispname:conn->host.dispname);
2003-01-07 05:13:39 +03:00
}
else {
/*
* This is a brand new connection, so let's store it in the connection
* cache of ours!
*/
ConnectionStore(data, conn);
}
2004-10-05 17:34:20 +04:00
/* Continue connectdata initialization here.
*
* Inherit the proper values from the urldata struct AFTER we have arranged
* the persistant conncetion stuff */
conn->fread = data->set.fread;
conn->fread_in = data->set.in;
conn->bits.upload_chunky =
((conn->protocol&PROT_HTTP) &&
data->set.upload &&
(data->set.infilesize == -1) &&
(data->set.httpversion != CURL_HTTP_VERSION_1_0))?
/* HTTP, upload, unknown file size and not HTTP 1.0 */
TRUE:
/* else, no chunky upload */
FALSE;
#ifndef USE_ARES
2003-01-07 05:13:39 +03:00
/*************************************************************
2004-10-05 17:34:20 +04:00
* Set timeout if that is being used, and we're not using an asynchronous
* name resolve.
2003-01-07 05:13:39 +03:00
*************************************************************/
2003-01-10 07:26:37 +03:00
if((data->set.timeout || data->set.connecttimeout) && !data->set.no_signal) {
2003-01-07 05:13:39 +03:00
/*************************************************************
* Set signal handler to catch SIGALRM
* Store the old value to be able to set it back later!
*************************************************************/
2004-10-05 17:34:20 +04:00
#ifdef SIGALRM
2003-01-07 05:13:39 +03:00
#ifdef HAVE_SIGACTION
struct sigaction sigact;
sigaction(SIGALRM, NULL, &sigact);
keep_sigact = sigact;
keep_copysig = TRUE; /* yes, we have a copy */
sigact.sa_handler = alarmfunc;
#ifdef SA_RESTART
/* HPUX doesn't have SA_RESTART but defaults to that behaviour! */
sigact.sa_flags &= ~SA_RESTART;
#endif
/* now set the new struct */
sigaction(SIGALRM, &sigact, NULL);
2004-10-05 17:34:20 +04:00
#else /* HAVE_SIGACTION */
2003-01-07 05:13:39 +03:00
/* no sigaction(), revert to the much lamer signal() */
#ifdef HAVE_SIGNAL
keep_sigact = signal(SIGALRM, alarmfunc);
#endif
2004-10-05 17:34:20 +04:00
#endif /* HAVE_SIGACTION */
2003-01-07 05:13:39 +03:00
/* We set the timeout on the name resolving phase first, separately from
* the download/upload part to allow a maximum time on everything. This is
* a signal-based timeout, why it won't work and shouldn't be used in
* multi-threaded environments. */
#ifdef HAVE_ALARM
/* alarm() makes a signal get sent when the timeout fires off, and that
will abort system calls */
prev_alarm = alarm(data->set.connecttimeout?
data->set.connecttimeout:
data->set.timeout);
/* We can expect the conn->created time to be "now", as that was just
recently set in the beginning of this function and nothing slow
has been done since then until now. */
#endif
2004-10-05 17:34:20 +04:00
#endif /* SIGALRM */
2003-01-07 05:13:39 +03:00
}
2004-10-05 17:34:20 +04:00
#endif /* USE_ARES */
2003-01-07 05:13:39 +03:00
/*************************************************************
* Resolve the name of the server or proxy
*************************************************************/
2003-01-10 07:26:37 +03:00
if(conn->bits.reuse) {
/* re-used connection, no resolving is necessary */
hostaddr = NULL;
2004-10-05 17:34:20 +04:00
conn->dns_entry = NULL; /* we don't connect now so we don't have any fresh
dns entry struct to point to */
if (conn->bits.httpproxy)
fix_hostname(conn, &conn->host);
2003-01-10 07:26:37 +03:00
}
2004-10-05 17:34:20 +04:00
else {
/* this is a fresh connect */
/* set a pointer to the hostname we display */
fix_hostname(conn, &conn->host);
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
if(!data->change.proxy || !*data->change.proxy) {
/* If not connecting via a proxy, extract the port from the URL, if it is
* there, thus overriding any defaults that might have been set above. */
conn->port = conn->remote_port; /* it is the same port */
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
/* Resolve target host right on */
rc = Curl_resolv(conn, conn->host.name, (int)conn->port, &hostaddr);
if(rc == CURLRESOLV_PENDING)
*async = TRUE;
else if(!hostaddr) {
failf(data, "Couldn't resolve host '%s'", conn->host.dispname);
result = CURLE_COULDNT_RESOLVE_HOST;
/* don't return yet, we need to clean up the timeout first */
}
2003-01-07 05:13:39 +03:00
}
2004-10-05 17:34:20 +04:00
else {
/* This is a proxy that hasn't been resolved yet. */
/* IDN-fix the proxy name */
fix_hostname(conn, &conn->proxy);
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
/* resolve proxy */
rc = Curl_resolv(conn, conn->proxy.name, (int)conn->port, &hostaddr);
2003-01-07 05:13:39 +03:00
2004-10-05 17:34:20 +04:00
if(rc == CURLRESOLV_PENDING)
*async = TRUE;
else if(!hostaddr) {
failf(data, "Couldn't resolve proxy '%s'", conn->proxy.dispname);
result = CURLE_COULDNT_RESOLVE_PROXY;
/* don't return yet, we need to clean up the timeout first */
}
2003-01-07 05:13:39 +03:00
}
}
2004-10-05 17:34:20 +04:00
*addr = hostaddr;
#if defined(HAVE_ALARM) && defined(SIGALRM) && !defined(USE_ARES)
2003-01-10 07:26:37 +03:00
if((data->set.timeout || data->set.connecttimeout) && !data->set.no_signal) {
2003-01-07 05:13:39 +03:00
#ifdef HAVE_SIGACTION
if(keep_copysig) {
/* we got a struct as it looked before, now put that one back nice
and clean */
sigaction(SIGALRM, &keep_sigact, NULL); /* put it back */
}
#else
#ifdef HAVE_SIGNAL
/* restore the previous SIGALRM handler */
signal(SIGALRM, keep_sigact);
#endif
2004-10-05 17:34:20 +04:00
#endif /* HAVE_SIGACTION */
2003-01-07 05:13:39 +03:00
/* switch back the alarm() to either zero or to what it was before minus
the time we spent until now! */
if(prev_alarm) {
/* there was an alarm() set before us, now put it back */
2004-10-05 17:34:20 +04:00
unsigned long elapsed_ms = Curl_tvdiff(Curl_tvnow(), conn->created);
unsigned long alarm_set;
2003-01-07 05:13:39 +03:00
/* the alarm period is counted in even number of seconds */
alarm_set = prev_alarm - elapsed_ms/1000;
2004-10-05 17:34:20 +04:00
if(!alarm_set ||
((alarm_set >= 0x80000000) && (prev_alarm < 0x80000000)) ) {
/* if the alarm time-left reached zero or turned "negative" (counted
with unsigned values), we should fire off a SIGALRM here, but we
2003-01-07 05:13:39 +03:00
won't, and zero would be to switch it off so we never set it to
less than 1! */
alarm(1);
result = CURLE_OPERATION_TIMEOUTED;
failf(data, "Previous alarm fired off!");
}
else
2004-10-05 17:34:20 +04:00
alarm((unsigned int)alarm_set);
2003-01-07 05:13:39 +03:00
}
else
alarm(0); /* just shut it off */
}
#endif
2004-10-05 17:34:20 +04:00
return result;
}
/* SetupConnection() should be called after the name resolve initiated in
* CreateConnection() is all done.
*/
static CURLcode SetupConnection(struct connectdata *conn,
struct Curl_dns_entry *hostaddr)
{
struct SessionHandle *data = conn->data;
CURLcode result=CURLE_OK;
Curl_pgrsTime(data, TIMER_NAMELOOKUP);
if(conn->protocol & PROT_FILE)
/* There's nothing in this function to setup if we're only doing
a file:// transfer */
return result;
2003-01-07 05:13:39 +03:00
/*************************************************************
* Send user-agent to HTTP proxies even if the target protocol
* isn't HTTP.
*************************************************************/
2003-01-10 07:26:37 +03:00
if((conn->protocol&PROT_HTTP) ||
(data->change.proxy && *data->change.proxy)) {
2003-01-07 05:13:39 +03:00
if(data->set.useragent) {
2004-10-05 17:34:20 +04:00
Curl_safefree(conn->allocptr.uagent);
2003-01-07 05:13:39 +03:00
conn->allocptr.uagent =
aprintf("User-Agent: %s\015\012", data->set.useragent);
2004-10-05 17:34:20 +04:00
if(!conn->allocptr.uagent)
return CURLE_OUT_OF_MEMORY;
2003-01-07 05:13:39 +03:00
}
}
2003-01-10 07:26:37 +03:00
if(data->set.encoding) {
2004-10-05 17:34:20 +04:00
Curl_safefree(conn->allocptr.accept_encoding);
2003-01-10 07:26:37 +03:00
conn->allocptr.accept_encoding =
aprintf("Accept-Encoding: %s\015\012", data->set.encoding);
2004-10-05 17:34:20 +04:00
if(!conn->allocptr.accept_encoding)
return CURLE_OUT_OF_MEMORY;
2003-01-07 05:13:39 +03:00
}
conn->bytecount = 0;
conn->headerbytecount = 0;
2004-10-05 17:34:20 +04:00
if(CURL_SOCKET_BAD == conn->sock[FIRSTSOCKET]) {
2003-01-10 07:26:37 +03:00
bool connected;
2003-01-07 05:13:39 +03:00
2003-01-10 07:26:37 +03:00
/* Connect only if not already connected! */
result = ConnectPlease(conn, hostaddr, &connected);
2003-01-14 17:12:37 +03:00
if(connected) {
2004-10-05 17:34:20 +04:00
result = Curl_protocol_connect(conn);
2003-01-14 17:12:37 +03:00
if(CURLE_OK == result)
conn->bits.tcpconnect = TRUE;
}
else
conn->bits.tcpconnect = FALSE;
2003-01-10 07:26:37 +03:00
if(CURLE_OK != result)
return result;
2003-01-07 05:13:39 +03:00
}
2003-01-10 07:26:37 +03:00
else {
Curl_pgrsTime(data, TIMER_CONNECT); /* we're connected already */
2003-01-14 17:12:37 +03:00
conn->bits.tcpconnect = TRUE;
2003-01-10 07:26:37 +03:00
if(data->set.verbose)
2004-10-05 17:34:20 +04:00
verboseconnect(conn);
2003-01-07 05:13:39 +03:00
}
2003-01-10 07:26:37 +03:00
conn->now = Curl_tvnow(); /* time this *after* the connect is done, we
set this here perhaps a second time */
2003-01-07 05:13:39 +03:00
#ifdef __EMX__
/* 20000330 mgs
* the check is quite a hack...
* we're calling _fsetmode to fix the problem with fwrite converting newline
* characters (you get mangled text files, and corrupted binary files when
* you download to stdout and redirect it to a file). */
if ((data->set.out)->_handle == NULL) {
_fsetmode(stdout, "b");
}
#endif
return CURLE_OK;
}
CURLcode Curl_connect(struct SessionHandle *data,
2004-10-05 17:34:20 +04:00
struct connectdata **in_connect,
bool *asyncp)
2003-01-07 05:13:39 +03:00
{
CURLcode code;
2004-10-05 17:34:20 +04:00
struct Curl_dns_entry *dns;
*asyncp = FALSE; /* assume synchronous resolves by default */
2003-01-07 05:13:39 +03:00
/* call the stuff that needs to be called */
2004-10-05 17:34:20 +04:00
code = CreateConnection(data, in_connect, &dns, asyncp);
if(CURLE_OK == code) {
/* no error */
if(dns || !*asyncp)
/* If an address is available it means that we already have the name
resolved, OR it isn't async.
If so => continue connecting from here */
code = SetupConnection(*in_connect, dns);
/* else
response will be received and treated async wise */
}
2003-01-07 05:13:39 +03:00
if(CURLE_OK != code) {
/* We're not allowed to return failure with memory left allocated
in the connectdata struct, free those here */
2004-10-05 17:34:20 +04:00
if(*in_connect) {
Curl_disconnect(*in_connect); /* close the connection */
*in_connect = NULL; /* return a NULL */
2003-01-07 05:13:39 +03:00
}
}
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
return code;
}
2004-10-05 17:34:20 +04:00
/* Call this function after Curl_connect() has returned async=TRUE and
then a successful name resolve has been received */
CURLcode Curl_async_resolved(struct connectdata *conn)
{
#if defined(USE_ARES) || defined(USE_THREADING_GETHOSTBYNAME) || \
defined(USE_THREADING_GETADDRINFO)
CURLcode code = SetupConnection(conn, conn->async.dns);
if(code)
/* We're not allowed to return failure with memory left allocated
in the connectdata struct, free those here */
Curl_disconnect(conn); /* close the connection */
return code;
#else
(void)conn;
return CURLE_OK;
#endif
}
CURLcode Curl_done(struct connectdata **connp,
CURLcode status) /* an error if this is called after an
error was detected */
2003-01-07 05:13:39 +03:00
{
CURLcode result;
2004-10-05 17:34:20 +04:00
struct connectdata *conn = *connp;
struct SessionHandle *data=conn->data;
2003-01-07 05:13:39 +03:00
/* cleanups done even if the connection is re-used */
if(conn->bits.rangestringalloc) {
free(conn->range);
conn->bits.rangestringalloc = FALSE;
}
/* Cleanup possible redirect junk */
if(conn->newurl) {
free(conn->newurl);
conn->newurl = NULL;
}
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
if(conn->dns_entry)
Curl_resolv_unlock(conn->data, conn->dns_entry); /* done with this */
2003-01-10 07:26:37 +03:00
2004-10-05 17:34:20 +04:00
#if defined(CURLDEBUG) && defined(AGGRESIVE_TEST)
2003-01-10 07:26:37 +03:00
/* scan for DNS cache entries still marked as in use */
Curl_hash_apply(data->hostcache,
NULL, Curl_scan_cache_used);
#endif
2004-10-05 17:34:20 +04:00
Curl_hostcache_prune(data); /* kill old DNS cache entries */
2003-01-07 05:13:39 +03:00
/* this calls the protocol-specific function pointer previously set */
if(conn->curl_done)
2004-10-05 17:34:20 +04:00
result = conn->curl_done(conn, status);
2003-01-07 05:13:39 +03:00
else
result = CURLE_OK;
Curl_pgrsDone(conn); /* done with the operation */
/* if data->set.reuse_forbid is TRUE, it means the libcurl client has
forced us to close this no matter what we think.
2004-10-05 17:34:20 +04:00
2003-01-07 05:13:39 +03:00
if conn->bits.close is TRUE, it means that the connection should be
closed in spite of all our efforts to be nice, due to protocol
restrictions in our or the server's end */
2004-10-05 17:34:20 +04:00
if(data->set.reuse_forbid || conn->bits.close) {
CURLcode res2;
res2 = Curl_disconnect(conn); /* close the connection */
*connp = NULL; /* to make the caller of this function better detect that
this was actually killed here */
/* If we had an error already, make sure we return that one. But
if we got a new error, return that. */
if(!result && res2)
result = res2;
}
2003-01-07 05:13:39 +03:00
else
2004-10-05 17:34:20 +04:00
infof(data, "Connection #%ld to host %s left intact\n",
conn->connectindex,
conn->bits.httpproxy?conn->proxy.dispname:conn->host.dispname);
2003-01-07 05:13:39 +03:00
return result;
}
CURLcode Curl_do(struct connectdata **connp)
{
CURLcode result=CURLE_OK;
struct connectdata *conn = *connp;
struct SessionHandle *data=conn->data;
2003-01-10 07:26:37 +03:00
conn->bits.do_more = FALSE; /* by default there's no curl_do_more() to use */
2003-01-07 05:13:39 +03:00
if(conn->curl_do) {
/* generic protocol-specific function pointer set in curl_connect() */
result = conn->curl_do(conn);
/* This was formerly done in transfer.c, but we better do it here */
2004-10-05 17:34:20 +04:00
2003-01-10 07:26:37 +03:00
if((CURLE_SEND_ERROR == result) && conn->bits.reuse) {
2003-01-07 05:13:39 +03:00
/* This was a re-use of a connection and we got a write error in the
* DO-phase. Then we DISCONNECT this connection and have another attempt
* to CONNECT and then DO again! The retry cannot possibly find another
* connection to re-use, since we only keep one possible connection for
* each. */
infof(data, "Re-used connection seems dead, get a new one\n");
2004-10-05 17:34:20 +04:00
conn->bits.close = TRUE; /* enforce close of this connection */
result = Curl_done(&conn, result); /* we are so done with this */
/* conn may no longer be a good pointer */
2003-01-07 05:13:39 +03:00
if(CURLE_OK == result) {
2004-10-05 17:34:20 +04:00
bool async;
2003-01-07 05:13:39 +03:00
/* Now, redo the connect and get a new connection */
2004-10-05 17:34:20 +04:00
result = Curl_connect(data, connp, &async);
if(CURLE_OK == result) {
/* We have connected or sent away a name resolve query fine */
conn = *connp; /* setup conn to again point to something nice */
if(async) {
/* Now, if async is TRUE here, we need to wait for the name
to resolve */
result = Curl_wait_for_resolv(conn, NULL);
if(result)
return result;
/* Resolved, continue with the connection */
result = Curl_async_resolved(conn);
if(result)
return result;
}
2003-01-07 05:13:39 +03:00
/* ... finally back to actually retry the DO phase */
2004-10-05 17:34:20 +04:00
result = conn->curl_do(conn);
}
2003-01-07 05:13:39 +03:00
}
}
}
return result;
}
2003-01-10 07:26:37 +03:00
CURLcode Curl_do_more(struct connectdata *conn)
{
CURLcode result=CURLE_OK;
if(conn->curl_do_more)
result = conn->curl_do_more(conn);
return result;
}
2004-10-05 17:34:20 +04:00
static bool safe_strequal(char* str1, char* str2)
{
if(str1 && str2)
/* both pointers point to something then compare them */
return strequal(str1, str2);
else
/* if both pointers are NULL then treat them as equal */
return (!str1 && !str2);
}
bool
Curl_ssl_config_matches(struct ssl_config_data* data,
struct ssl_config_data* needle)
{
if((data->version == needle->version) &&
(data->verifypeer == needle->verifypeer) &&
(data->verifyhost == needle->verifyhost) &&
safe_strequal(data->CApath, needle->CApath) &&
safe_strequal(data->CAfile, needle->CAfile) &&
safe_strequal(data->random_file, needle->random_file) &&
safe_strequal(data->egdsocket, needle->egdsocket) &&
safe_strequal(data->cipher_list, needle->cipher_list))
return TRUE;
return FALSE;
}
bool
Curl_clone_ssl_config(struct ssl_config_data *source,
struct ssl_config_data *dest)
{
dest->verifyhost = source->verifyhost;
dest->verifypeer = source->verifypeer;
dest->version = source->version;
if(source->CAfile) {
dest->CAfile = strdup(source->CAfile);
if(!dest->CAfile)
return FALSE;
}
if(source->CApath) {
dest->CApath = strdup(source->CApath);
if(!dest->CApath)
return FALSE;
}
if(source->cipher_list) {
dest->cipher_list = strdup(source->cipher_list);
if(!dest->cipher_list)
return FALSE;
}
if(source->egdsocket) {
dest->egdsocket = strdup(source->egdsocket);
if(!dest->egdsocket)
return FALSE;
}
if(source->random_file) {
dest->random_file = strdup(source->random_file);
if(!dest->random_file)
return FALSE;
}
return TRUE;
}
void Curl_free_ssl_config(struct ssl_config_data* sslc)
{
if(sslc->CAfile)
free(sslc->CAfile);
if(sslc->CApath)
free(sslc->CApath);
if(sslc->cipher_list)
free(sslc->cipher_list);
if(sslc->egdsocket)
free(sslc->egdsocket);
if(sslc->random_file)
free(sslc->random_file);
}