CMake/Modules/ExternalProject.cmake

2307 lines
77 KiB
CMake
Raw Normal View History

#[=======================================================================[.rst:
ExternalProject
---------------
Create custom targets to build projects in external trees
.. command:: ExternalProject_Add
The ``ExternalProject_Add`` function creates a custom target to drive
download, update/patch, configure, build, install and test steps of an
external project::
ExternalProject_Add(<name> [<option>...])
General options are:
``DEPENDS <projects>...``
Targets on which the project depends
``PREFIX <dir>``
Root dir for entire project
``LIST_SEPARATOR <sep>``
Sep to be replaced by ; in cmd lines
``TMP_DIR <dir>``
Directory to store temporary files
``STAMP_DIR <dir>``
Directory to store step timestamps
``EXCLUDE_FROM_ALL 1``
The "all" target does not depend on this
Download step options are:
``DOWNLOAD_NAME <fname>``
File name to store (if not end of URL)
``DOWNLOAD_DIR <dir>``
Directory to store downloaded files
``DOWNLOAD_COMMAND <cmd>...``
Command to download source tree
``DOWNLOAD_NO_PROGRESS 1``
Disable download progress reports
``CVS_REPOSITORY <cvsroot>``
CVSROOT of CVS repository
``CVS_MODULE <mod>``
Module to checkout from CVS repo
``CVS_TAG <tag>``
Tag to checkout from CVS repo
``SVN_REPOSITORY <url>``
URL of Subversion repo
``SVN_REVISION -r<rev>``
Revision to checkout from Subversion repo
``SVN_USERNAME <username>``
Username for Subversion checkout and update
``SVN_PASSWORD <password>``
Password for Subversion checkout and update
``SVN_TRUST_CERT 1``
Trust the Subversion server site certificate
``GIT_REPOSITORY <url>``
URL of git repo
``GIT_TAG <tag>``
Git branch name, commit id or tag
``GIT_SUBMODULES <module>...``
Git submodules that shall be updated, all if empty
``HG_REPOSITORY <url>``
URL of mercurial repo
``HG_TAG <tag>``
Mercurial branch name, commit id or tag
``URL /.../src.tgz``
Full path or URL of source
``URL_HASH ALGO=value``
Hash of file at URL
``URL_MD5 md5``
Equivalent to URL_HASH MD5=md5
``TLS_VERIFY <bool>``
Should certificate for https be checked
``TLS_CAINFO <file>``
Path to a certificate authority file
``TIMEOUT <seconds>``
Time allowed for file download operations
Update/Patch step options are:
``UPDATE_COMMAND <cmd>...``
Source work-tree update command
``UPDATE_DISCONNECTED 1``
Never update automatically from the remote repository
``PATCH_COMMAND <cmd>...``
Command to patch downloaded source
Configure step options are:
``SOURCE_DIR <dir>``
Source dir to be used for build
``CONFIGURE_COMMAND <cmd>...``
Build tree configuration command
``CMAKE_COMMAND /.../cmake``
Specify alternative cmake executable
``CMAKE_GENERATOR <gen>``
Specify generator for native build
``CMAKE_GENERATOR_PLATFORM <platform>``
Generator-specific platform name
``CMAKE_GENERATOR_TOOLSET <toolset>``
Generator-specific toolset name
``CMAKE_ARGS <arg>...``
Arguments to CMake command line.
These arguments are passed to CMake command line, and can contain
arguments other than cache values, see also
:manual:`CMake Options <cmake(1)>`. Arguments in the form
``-Dvar:string=on`` are always passed to the command line, and
therefore cannot be changed by the user.
``CMAKE_CACHE_ARGS <arg>...``
Initial cache arguments, of the form ``-Dvar:string=on``.
These arguments are written in a pre-load a script that populates
CMake cache, see also :manual:`cmake -C <cmake(1)>`. This allows to
overcome command line length limits.
These arguments are :command:`set` using the ``FORCE`` argument,
and therefore cannot be changed by the user.
``CMAKE_CACHE_DEFAULT_ARGS <arg>...``
Initial default cache arguments, of the form ``-Dvar:string=on``.
These arguments are written in a pre-load a script that populates
CMake cache, see also :manual:`cmake -C <cmake(1)>`. This allows to
overcome command line length limits.
These arguments can be used as default value that will be set if no
previous value is found in the cache, and that the user can change
later.
Build step options are:
``BINARY_DIR <dir>``
Specify build dir location
``BUILD_COMMAND <cmd>...``
Command to drive the native build
``BUILD_IN_SOURCE 1``
Use source dir for build dir
``BUILD_ALWAYS 1``
No stamp file, build step always runs
``BUILD_BYPRODUCTS <file>...``
Files that will be generated by the build command but may or may
not have their modification time updated by subsequent builds.
Install step options are:
``INSTALL_DIR <dir>``
Installation prefix
``INSTALL_COMMAND <cmd>...``
Command to drive install after build
Test step options are:
``TEST_BEFORE_INSTALL 1``
Add test step executed before install step
``TEST_AFTER_INSTALL 1``
Add test step executed after install step
``TEST_COMMAND <cmd>...``
Command to drive test
Output logging options are:
``LOG_DOWNLOAD 1``
Wrap download in script to log output
``LOG_UPDATE 1``
Wrap update in script to log output
``LOG_CONFIGURE 1``
Wrap configure in script to log output
``LOG_BUILD 1``
Wrap build in script to log output
``LOG_TEST 1``
Wrap test in script to log output
``LOG_INSTALL 1``
Wrap install in script to log output
Other options are:
``STEP_TARGETS <step-target>...``
Generate custom targets for these steps
``INDEPENDENT_STEP_TARGETS <step-target>...``
Generate custom targets for these steps that do not depend on other
external projects even if a dependency is set
The ``*_DIR`` options specify directories for the project, with default
directories computed as follows. If the ``PREFIX`` option is given to
``ExternalProject_Add()`` or the ``EP_PREFIX`` directory property is set,
then an external project is built and installed under the specified prefix::
TMP_DIR = <prefix>/tmp
STAMP_DIR = <prefix>/src/<name>-stamp
DOWNLOAD_DIR = <prefix>/src
SOURCE_DIR = <prefix>/src/<name>
BINARY_DIR = <prefix>/src/<name>-build
INSTALL_DIR = <prefix>
Otherwise, if the ``EP_BASE`` directory property is set then components
of an external project are stored under the specified base::
TMP_DIR = <base>/tmp/<name>
STAMP_DIR = <base>/Stamp/<name>
DOWNLOAD_DIR = <base>/Download/<name>
SOURCE_DIR = <base>/Source/<name>
BINARY_DIR = <base>/Build/<name>
INSTALL_DIR = <base>/Install/<name>
If no ``PREFIX``, ``EP_PREFIX``, or ``EP_BASE`` is specified then the
default is to set ``PREFIX`` to ``<name>-prefix``. Relative paths are
interpreted with respect to the build directory corresponding to the
source directory in which ``ExternalProject_Add`` is invoked.
If ``SOURCE_DIR`` is explicitly set to an existing directory the project
will be built from it. Otherwise a download step must be specified
using one of the ``DOWNLOAD_COMMAND``, ``CVS_*``, ``SVN_*``, or ``URL``
options. The ``URL`` option may refer locally to a directory or source
tarball, or refer to a remote tarball (e.g. ``http://.../src.tgz``).
If ``UPDATE_DISCONNECTED`` is set, the update step is not executed
automatically when building the main target. The update step can still
be added as a step target and called manually. This is useful if you
want to allow to build the project when you are disconnected from the
network (you might still need the network for the download step).
This is disabled by default.
The directory property ``EP_UPDATE_DISCONNECTED`` can be used to change
the default value for all the external projects in the current
directory and its subdirectories.
.. command:: ExternalProject_Add_Step
The ``ExternalProject_Add_Step`` function adds a custom step to an
external project::
ExternalProject_Add_Step(<name> <step> [<option>...])
Options are:
``COMMAND <cmd>...``
Command line invoked by this step
``COMMENT "<text>..."``
Text printed when step executes
``DEPENDEES <step>...``
Steps on which this step depends
``DEPENDERS <step>...``
Steps that depend on this step
``DEPENDS <file>...``
Files on which this step depends
``BYPRODUCTS <file>...``
Files that will be generated by this step but may or may not
have their modification time updated by subsequent builds.
``ALWAYS 1``
No stamp file, step always runs
``EXCLUDE_FROM_MAIN 1``
Main target does not depend on this step
``WORKING_DIRECTORY <dir>``
Working directory for command
``LOG 1``
Wrap step in script to log output
The command line, comment, and working directory of every standard and
custom step is processed to replace tokens ``<SOURCE_DIR>``,
``<BINARY_DIR>``, ``<INSTALL_DIR>``, and ``<TMP_DIR>`` with
corresponding property values.
Any builtin step that specifies a ``<step>_COMMAND cmd...`` or custom
step that specifies a ``COMMAND cmd...`` may specify additional command
lines using the form ``COMMAND cmd...``. At build time the commands
will be executed in order and aborted if any one fails. For example::
... BUILD_COMMAND make COMMAND echo done ...
specifies to run ``make`` and then ``echo done`` during the build step.
Whether the current working directory is preserved between commands is
not defined. Behavior of shell operators like ``&&`` is not defined.
.. command:: ExternalProject_Get_Property
The ``ExternalProject_Get_Property`` function retrieves external project
target properties::
ExternalProject_Get_Property(<name> [prop1 [prop2 [...]]])
It stores property values in variables of the same name. Property
names correspond to the keyword argument names of
``ExternalProject_Add``.
.. command:: ExternalProject_Add_StepTargets
The ``ExternalProject_Add_StepTargets`` function generates custom
targets for the steps listed::
ExternalProject_Add_StepTargets(<name> [NO_DEPENDS] [step1 [step2 [...]]])
If ``NO_DEPENDS`` is set, the target will not depend on the
dependencies of the complete project. This is usually safe to use for
the download, update, and patch steps that do not require that all the
dependencies are updated and built. Using ``NO_DEPENDS`` for other
of the default steps might break parallel builds, so you should avoid,
it. For custom steps, you should consider whether or not the custom
commands requires that the dependencies are configured, built and
installed.
If ``STEP_TARGETS`` or ``INDEPENDENT_STEP_TARGETS`` is set then
``ExternalProject_Add_StepTargets`` is automatically called at the end
of matching calls to ``ExternalProject_Add_Step``. Pass
``STEP_TARGETS`` or ``INDEPENDENT_STEP_TARGETS`` explicitly to
individual ``ExternalProject_Add`` calls, or implicitly to all
``ExternalProject_Add`` calls by setting the directory properties
``EP_STEP_TARGETS`` and ``EP_INDEPENDENT_STEP_TARGETS``. The
``INDEPENDENT`` version of the argument and of the property will call
``ExternalProject_Add_StepTargets`` with the ``NO_DEPENDS`` argument.
If ``STEP_TARGETS`` and ``INDEPENDENT_STEP_TARGETS`` are not set,
clients may still manually call ``ExternalProject_Add_StepTargets``
after calling ``ExternalProject_Add`` or ``ExternalProject_Add_Step``.
This functionality is provided to make it easy to drive the steps
independently of each other by specifying targets on build command
lines. For example, you may be submitting to a sub-project based
dashboard, where you want to drive the configure portion of the build,
then submit to the dashboard, followed by the build portion, followed
by tests. If you invoke a custom target that depends on a step
halfway through the step dependency chain, then all the previous steps
will also run to ensure everything is up to date.
For example, to drive configure, build and test steps independently
for each ``ExternalProject_Add`` call in your project, write the following
line prior to any ``ExternalProject_Add`` calls in your ``CMakeLists.txt``
file::
set_property(DIRECTORY PROPERTY EP_STEP_TARGETS configure build test)
.. command:: ExternalProject_Add_StepDependencies
The ``ExternalProject_Add_StepDependencies`` function add some
dependencies for some external project step::
ExternalProject_Add_StepDependencies(<name> <step> [target1 [target2 [...]]])
This function takes care to set both target and file level
dependencies, and will ensure that parallel builds will not break.
It should be used instead of :command:`add_dependencies()` when adding
a dependency for some of the step targets generated by
``ExternalProject``.
#]=======================================================================]
#=============================================================================
# Copyright 2008-2013 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
# License text for the above reference.)
# Pre-compute a regex to match documented keywords for each command.
math(EXPR _ep_documentation_line_count "${CMAKE_CURRENT_LIST_LINE} - 16")
file(STRINGS "${CMAKE_CURRENT_LIST_FILE}" lines
LIMIT_COUNT ${_ep_documentation_line_count}
REGEX "^\\.\\. command:: [A-Za-z0-9_]+|^ ``[A-Z0-9_]+ .*``$")
foreach(line IN LISTS lines)
if("${line}" MATCHES "^\\.\\. command:: ([A-Za-z0-9_]+)")
if(_ep_func)
set(_ep_keywords_${_ep_func} "${_ep_keywords_${_ep_func}})$")
endif()
set(_ep_func "${CMAKE_MATCH_1}")
#message("function [${_ep_func}]")
set(_ep_keywords_${_ep_func} "^(")
set(_ep_keyword_sep)
elseif("${line}" MATCHES "^ ``([A-Z0-9_]+) .*``$")
set(_ep_key "${CMAKE_MATCH_1}")
#message(" keyword [${_ep_key}]")
set(_ep_keywords_${_ep_func}
"${_ep_keywords_${_ep_func}}${_ep_keyword_sep}${_ep_key}")
set(_ep_keyword_sep "|")
endif()
endforeach()
if(_ep_func)
set(_ep_keywords_${_ep_func} "${_ep_keywords_${_ep_func}})$")
endif()
# Save regex matching supported hash algorithm names.
set(_ep_hash_algos "MD5|SHA1|SHA224|SHA256|SHA384|SHA512")
set(_ep_hash_regex "^(${_ep_hash_algos})=([0-9A-Fa-f]+)$")
function(_ep_parse_arguments f name ns args)
# Transfer the arguments to this function into target properties for the
# new custom target we just added so that we can set up all the build steps
# correctly based on target properties.
#
# We loop through ARGN and consider the namespace starting with an
# upper-case letter followed by at least two more upper-case letters,
# numbers or underscores to be keywords.
set(key)
foreach(arg IN LISTS args)
set(is_value 1)
if(arg MATCHES "^[A-Z][A-Z0-9_][A-Z0-9_]+$" AND
NOT (("x${arg}x" STREQUAL "x${key}x") AND ("x${key}x" STREQUAL "xCOMMANDx")) AND
NOT arg MATCHES "^(TRUE|FALSE)$")
if(_ep_keywords_${f} AND arg MATCHES "${_ep_keywords_${f}}")
set(is_value 0)
endif()
endif()
if(is_value)
if(key)
# Value
if(NOT arg STREQUAL "")
set_property(TARGET ${name} APPEND PROPERTY ${ns}${key} "${arg}")
else()
get_property(have_key TARGET ${name} PROPERTY ${ns}${key} SET)
if(have_key)
get_property(value TARGET ${name} PROPERTY ${ns}${key})
set_property(TARGET ${name} PROPERTY ${ns}${key} "${value};${arg}")
else()
set_property(TARGET ${name} PROPERTY ${ns}${key} "${arg}")
endif()
endif()
else()
# Missing Keyword
message(AUTHOR_WARNING "value '${arg}' with no previous keyword in ${f}")
endif()
else()
set(key "${arg}")
endif()
endforeach()
endfunction()
define_property(DIRECTORY PROPERTY "EP_BASE" INHERITED
BRIEF_DOCS "Base directory for External Project storage."
FULL_DOCS
"See documentation of the ExternalProject_Add() function in the "
"ExternalProject module."
)
define_property(DIRECTORY PROPERTY "EP_PREFIX" INHERITED
BRIEF_DOCS "Top prefix for External Project storage."
FULL_DOCS
"See documentation of the ExternalProject_Add() function in the "
"ExternalProject module."
)
define_property(DIRECTORY PROPERTY "EP_STEP_TARGETS" INHERITED
BRIEF_DOCS
"List of ExternalProject steps that automatically get corresponding targets"
FULL_DOCS
"These targets will be dependent on the main target dependencies"
"See documentation of the ExternalProject_Add_StepTargets() function in the "
"ExternalProject module."
)
define_property(DIRECTORY PROPERTY "EP_INDEPENDENT_STEP_TARGETS" INHERITED
BRIEF_DOCS
"List of ExternalProject steps that automatically get corresponding targets"
FULL_DOCS
"These targets will not be dependent on the main target dependencies"
"See documentation of the ExternalProject_Add_StepTargets() function in the "
"ExternalProject module."
)
define_property(DIRECTORY PROPERTY "EP_UPDATE_DISCONNECTED" INHERITED
BRIEF_DOCS "Never update automatically from the remote repo."
FULL_DOCS
"See documentation of the ExternalProject_Add() function in the "
"ExternalProject module."
)
function(_ep_write_gitclone_script script_filename source_dir git_EXECUTABLE git_repository git_tag git_submodules src_name work_dir gitclone_infofile gitclone_stampfile)
file(WRITE ${script_filename}
"if(\"${git_tag}\" STREQUAL \"\")
message(FATAL_ERROR \"Tag for git checkout should not be empty.\")
endif()
set(run 0)
if(\"${gitclone_infofile}\" IS_NEWER_THAN \"${gitclone_stampfile}\")
set(run 1)
endif()
if(NOT run)
message(STATUS \"Avoiding repeated git clone, stamp file is up to date: '${gitclone_stampfile}'\")
return()
endif()
execute_process(
COMMAND \${CMAKE_COMMAND} -E remove_directory \"${source_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to remove directory: '${source_dir}'\")
endif()
# try the clone 3 times incase there is an odd git clone issue
set(error_code 1)
set(number_of_tries 0)
while(error_code AND number_of_tries LESS 3)
execute_process(
COMMAND \"${git_EXECUTABLE}\" clone \"${git_repository}\" \"${src_name}\"
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
math(EXPR number_of_tries \"\${number_of_tries} + 1\")
endwhile()
if(number_of_tries GREATER 1)
message(STATUS \"Had to git clone more than once:
\${number_of_tries} times.\")
endif()
if(error_code)
message(FATAL_ERROR \"Failed to clone repository: '${git_repository}'\")
endif()
execute_process(
COMMAND \"${git_EXECUTABLE}\" checkout ${git_tag}
WORKING_DIRECTORY \"${work_dir}/${src_name}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to checkout tag: '${git_tag}'\")
endif()
execute_process(
COMMAND \"${git_EXECUTABLE}\" submodule init
WORKING_DIRECTORY \"${work_dir}/${src_name}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to init submodules in: '${work_dir}/${src_name}'\")
endif()
execute_process(
COMMAND \"${git_EXECUTABLE}\" submodule update --recursive ${git_submodules}
WORKING_DIRECTORY \"${work_dir}/${src_name}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to update submodules in: '${work_dir}/${src_name}'\")
endif()
# Complete success, update the script-last-run stamp file:
#
execute_process(
COMMAND \${CMAKE_COMMAND} -E copy
\"${gitclone_infofile}\"
\"${gitclone_stampfile}\"
WORKING_DIRECTORY \"${work_dir}/${src_name}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to copy script-last-run stamp file: '${gitclone_stampfile}'\")
endif()
"
)
endfunction()
function(_ep_write_hgclone_script script_filename source_dir hg_EXECUTABLE hg_repository hg_tag src_name work_dir hgclone_infofile hgclone_stampfile)
file(WRITE ${script_filename}
"if(\"${hg_tag}\" STREQUAL \"\")
message(FATAL_ERROR \"Tag for hg checkout should not be empty.\")
endif()
set(run 0)
if(\"${hgclone_infofile}\" IS_NEWER_THAN \"${hgclone_stampfile}\")
set(run 1)
endif()
if(NOT run)
message(STATUS \"Avoiding repeated hg clone, stamp file is up to date: '${hgclone_stampfile}'\")
return()
endif()
execute_process(
COMMAND \${CMAKE_COMMAND} -E remove_directory \"${source_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to remove directory: '${source_dir}'\")
endif()
execute_process(
COMMAND \"${hg_EXECUTABLE}\" clone \"${hg_repository}\" \"${src_name}\"
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to clone repository: '${hg_repository}'\")
endif()
execute_process(
COMMAND \"${hg_EXECUTABLE}\" update ${hg_tag}
WORKING_DIRECTORY \"${work_dir}/${src_name}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to checkout tag: '${hg_tag}'\")
endif()
# Complete success, update the script-last-run stamp file:
#
execute_process(
COMMAND \${CMAKE_COMMAND} -E copy
\"${hgclone_infofile}\"
\"${hgclone_stampfile}\"
WORKING_DIRECTORY \"${work_dir}/${src_name}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to copy script-last-run stamp file: '${hgclone_stampfile}'\")
endif()
"
)
endfunction()
function(_ep_write_gitupdate_script script_filename git_EXECUTABLE git_tag git_submodules git_repository work_dir)
file(WRITE ${script_filename}
"if(\"${git_tag}\" STREQUAL \"\")
message(FATAL_ERROR \"Tag for git checkout should not be empty.\")
endif()
execute_process(
COMMAND \"${git_EXECUTABLE}\" rev-list --max-count=1 HEAD
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
OUTPUT_VARIABLE head_sha
OUTPUT_STRIP_TRAILING_WHITESPACE
)
if(error_code)
message(FATAL_ERROR \"Failed to get the hash for HEAD\")
endif()
execute_process(
COMMAND \"${git_EXECUTABLE}\" show-ref ${git_tag}
WORKING_DIRECTORY \"${work_dir}\"
OUTPUT_VARIABLE show_ref_output
)
# If a remote ref is asked for, which can possibly move around,
# we must always do a fetch and checkout.
if(\"\${show_ref_output}\" MATCHES \"remotes\")
set(is_remote_ref 1)
else()
set(is_remote_ref 0)
endif()
# Tag is in the form <remote>/<tag> (i.e. origin/master) we must strip
# the remote from the tag.
if(\"\${show_ref_output}\" MATCHES \"refs/remotes/${git_tag}\")
string(REGEX MATCH \"^([^/]+)/(.+)$\" _unused \"${git_tag}\")
set(git_remote \"\${CMAKE_MATCH_1}\")
set(git_tag \"\${CMAKE_MATCH_2}\")
else()
set(git_remote \"origin\")
set(git_tag \"${git_tag}\")
endif()
# This will fail if the tag does not exist (it probably has not been fetched
# yet).
execute_process(
COMMAND \"${git_EXECUTABLE}\" rev-list --max-count=1 ${git_tag}
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
OUTPUT_VARIABLE tag_sha
OUTPUT_STRIP_TRAILING_WHITESPACE
)
# Is the hash checkout out that we want?
if(error_code OR is_remote_ref OR NOT (\"\${tag_sha}\" STREQUAL \"\${head_sha}\"))
execute_process(
COMMAND \"${git_EXECUTABLE}\" fetch
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to fetch repository '${git_repository}'\")
endif()
if(is_remote_ref)
# Check if stash is needed
execute_process(
COMMAND \"${git_EXECUTABLE}\" status --porcelain
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
OUTPUT_VARIABLE repo_status
)
if(error_code)
message(FATAL_ERROR \"Failed to get the status\")
endif()
string(LENGTH \"\${repo_status}\" need_stash)
# If not in clean state, stash changes in order to be able to be able to
# perform git pull --rebase
if(need_stash)
execute_process(
COMMAND \"${git_EXECUTABLE}\" stash save --all --quiet
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to stash changes\")
endif()
endif()
# Pull changes from the remote branch
execute_process(
COMMAND \"${git_EXECUTABLE}\" rebase \${git_remote}/\${git_tag}
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
# Rebase failed: Restore previous state.
execute_process(
COMMAND \"${git_EXECUTABLE}\" rebase --abort
WORKING_DIRECTORY \"${work_dir}\"
)
if(need_stash)
execute_process(
COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
WORKING_DIRECTORY \"${work_dir}\"
)
endif()
message(FATAL_ERROR \"\\nFailed to rebase in: '${work_dir}/${src_name}'.\\nYou will have to resolve the conflicts manually\")
endif()
if(need_stash)
execute_process(
COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
# Stash pop --index failed: Try again dropping the index
execute_process(
COMMAND \"${git_EXECUTABLE}\" reset --hard --quiet
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
execute_process(
COMMAND \"${git_EXECUTABLE}\" stash pop --quiet
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
# Stash pop failed: Restore previous state.
execute_process(
COMMAND \"${git_EXECUTABLE}\" reset --hard --quiet \${head_sha}
WORKING_DIRECTORY \"${work_dir}\"
)
execute_process(
COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
WORKING_DIRECTORY \"${work_dir}\"
)
message(FATAL_ERROR \"\\nFailed to unstash changes in: '${work_dir}/${src_name}'.\\nYou will have to resolve the conflicts manually\")
endif()
endif()
endif()
else()
execute_process(
COMMAND \"${git_EXECUTABLE}\" checkout ${git_tag}
WORKING_DIRECTORY \"${work_dir}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to checkout tag: '${git_tag}'\")
endif()
endif()
execute_process(
COMMAND \"${git_EXECUTABLE}\" submodule update --recursive ${git_submodules}
WORKING_DIRECTORY \"${work_dir}/${src_name}\"
RESULT_VARIABLE error_code
)
if(error_code)
message(FATAL_ERROR \"Failed to update submodules in: '${work_dir}/${src_name}'\")
endif()
endif()
"
)
endfunction(_ep_write_gitupdate_script)
function(_ep_write_downloadfile_script script_filename remote local timeout no_progress hash tls_verify tls_cainfo)
if(timeout)
set(timeout_args TIMEOUT ${timeout})
set(timeout_msg "${timeout} seconds")
else()
set(timeout_args "# no TIMEOUT")
set(timeout_msg "none")
endif()
if(no_progress)
set(show_progress "")
else()
set(show_progress "SHOW_PROGRESS")
endif()
if("${hash}" MATCHES "${_ep_hash_regex}")
string(CONCAT hash_check
"if(EXISTS \"${local}\")\n"
" file(\"${CMAKE_MATCH_1}\" \"${local}\" hash_value)\n"
" if(\"x\${hash_value}\" STREQUAL \"x${CMAKE_MATCH_2}\")\n"
" return()\n"
" endif()\n"
"endif()\n"
)
else()
set(hash_check "")
endif()
# check for curl globals in the project
if(DEFINED CMAKE_TLS_VERIFY)
set(tls_verify "set(CMAKE_TLS_VERIFY ${CMAKE_TLS_VERIFY})")
endif()
if(DEFINED CMAKE_TLS_CAINFO)
set(tls_cainfo "set(CMAKE_TLS_CAINFO \"${CMAKE_TLS_CAINFO}\")")
endif()
# now check for curl locals so that the local values
# will override the globals
# check for tls_verify argument
string(LENGTH "${tls_verify}" tls_verify_len)
if(tls_verify_len GREATER 0)
set(tls_verify "set(CMAKE_TLS_VERIFY ${tls_verify})")
endif()
# check for tls_cainfo argument
string(LENGTH "${tls_cainfo}" tls_cainfo_len)
if(tls_cainfo_len GREATER 0)
set(tls_cainfo "set(CMAKE_TLS_CAINFO \"${tls_cainfo}\")")
endif()
file(WRITE ${script_filename}
"${hash_check}message(STATUS \"downloading...
src='${remote}'
dst='${local}'
timeout='${timeout_msg}'\")
${tls_verify}
${tls_cainfo}
file(DOWNLOAD
\"${remote}\"
\"${local}\"
${show_progress}
${timeout_args}
STATUS status
LOG log)
list(GET status 0 status_code)
list(GET status 1 status_string)
if(NOT status_code EQUAL 0)
message(FATAL_ERROR \"error: downloading '${remote}' failed
status_code: \${status_code}
status_string: \${status_string}
log: \${log}
\")
endif()
message(STATUS \"downloading... done\")
"
)
endfunction()
function(_ep_write_verifyfile_script script_filename local hash retries download_script)
if("${hash}" MATCHES "${_ep_hash_regex}")
set(algo "${CMAKE_MATCH_1}")
string(TOLOWER "${CMAKE_MATCH_2}" expect_value)
set(script_content "set(expect_value \"${expect_value}\")
set(attempt 0)
set(succeeded 0)
while(\${attempt} LESS ${retries} OR \${attempt} EQUAL ${retries} AND NOT \${succeeded})
file(${algo} \"\${file}\" actual_value)
if(\"\${actual_value}\" STREQUAL \"\${expect_value}\")
set(succeeded 1)
elseif(\${attempt} LESS ${retries})
message(STATUS \"${algo} hash of \${file}
does not match expected value
expected: \${expect_value}
actual: \${actual_value}
Retrying download.
\")
file(REMOVE \"\${file}\")
execute_process(COMMAND \${CMAKE_COMMAND} -P \"${download_script}\")
endif()
math(EXPR attempt \"\${attempt} + 1\")
endwhile()
if(\${succeeded})
message(STATUS \"verifying file... done\")
else()
message(FATAL_ERROR \"error: ${algo} hash of
\${file}
does not match expected value
expected: \${expect_value}
actual: \${actual_value}
\")
endif()")
else()
set(script_content "message(STATUS \"verifying file... warning: did not verify file - no URL_HASH specified?\")")
endif()
file(WRITE ${script_filename} "set(file \"${local}\")
message(STATUS \"verifying file...
file='\${file}'\")
${script_content}
")
endfunction()
function(_ep_write_extractfile_script script_filename name filename directory)
set(args "")
if(filename MATCHES "(\\.|=)(7z|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
set(args xfz)
endif()
if(filename MATCHES "(\\.|=)tar$")
set(args xf)
endif()
if(args STREQUAL "")
message(SEND_ERROR "error: do not know how to extract '${filename}' -- known types are .7z, .tar, .tar.bz2, .tar.gz, .tar.xz, .tbz2, .tgz, .txz and .zip")
return()
endif()
file(WRITE ${script_filename}
"# Make file names absolute:
#
get_filename_component(filename \"${filename}\" ABSOLUTE)
get_filename_component(directory \"${directory}\" ABSOLUTE)
message(STATUS \"extracting...
src='\${filename}'
dst='\${directory}'\")
if(NOT EXISTS \"\${filename}\")
message(FATAL_ERROR \"error: file to extract does not exist: '\${filename}'\")
endif()
# Prepare a space for extracting:
#
set(i 1234)
while(EXISTS \"\${directory}/../ex-${name}\${i}\")
math(EXPR i \"\${i} + 1\")
endwhile()
set(ut_dir \"\${directory}/../ex-${name}\${i}\")
file(MAKE_DIRECTORY \"\${ut_dir}\")
# Extract it:
#
message(STATUS \"extracting... [tar ${args}]\")
execute_process(COMMAND \${CMAKE_COMMAND} -E tar ${args} \${filename}
WORKING_DIRECTORY \${ut_dir}
RESULT_VARIABLE rv)
if(NOT rv EQUAL 0)
message(STATUS \"extracting... [error clean up]\")
file(REMOVE_RECURSE \"\${ut_dir}\")
message(FATAL_ERROR \"error: extract of '\${filename}' failed\")
endif()
# Analyze what came out of the tar file:
#
message(STATUS \"extracting... [analysis]\")
file(GLOB contents \"\${ut_dir}/*\")
list(LENGTH contents n)
if(NOT n EQUAL 1 OR NOT IS_DIRECTORY \"\${contents}\")
set(contents \"\${ut_dir}\")
endif()
# Move \"the one\" directory to the final directory:
#
message(STATUS \"extracting... [rename]\")
file(REMOVE_RECURSE \${directory})
get_filename_component(contents \${contents} ABSOLUTE)
file(RENAME \${contents} \${directory})
# Clean up:
#
message(STATUS \"extracting... [clean up]\")
file(REMOVE_RECURSE \"\${ut_dir}\")
message(STATUS \"extracting... done\")
"
)
endfunction()
function(_ep_set_directories name)
get_property(prefix TARGET ${name} PROPERTY _EP_PREFIX)
if(NOT prefix)
get_property(prefix DIRECTORY PROPERTY EP_PREFIX)
if(NOT prefix)
get_property(base DIRECTORY PROPERTY EP_BASE)
if(NOT base)
set(prefix "${name}-prefix")
endif()
endif()
endif()
if(prefix)
set(tmp_default "${prefix}/tmp")
set(download_default "${prefix}/src")
set(source_default "${prefix}/src/${name}")
set(binary_default "${prefix}/src/${name}-build")
set(stamp_default "${prefix}/src/${name}-stamp")
set(install_default "${prefix}")
else()
set(tmp_default "${base}/tmp/${name}")
set(download_default "${base}/Download/${name}")
set(source_default "${base}/Source/${name}")
set(binary_default "${base}/Build/${name}")
set(stamp_default "${base}/Stamp/${name}")
set(install_default "${base}/Install/${name}")
endif()
get_property(build_in_source TARGET ${name} PROPERTY _EP_BUILD_IN_SOURCE)
if(build_in_source)
get_property(have_binary_dir TARGET ${name} PROPERTY _EP_BINARY_DIR SET)
if(have_binary_dir)
message(FATAL_ERROR
"External project ${name} has both BINARY_DIR and BUILD_IN_SOURCE!")
endif()
endif()
set(top "${CMAKE_CURRENT_BINARY_DIR}")
set(places stamp download source binary install tmp)
foreach(var ${places})
string(TOUPPER "${var}" VAR)
get_property(${var}_dir TARGET ${name} PROPERTY _EP_${VAR}_DIR)
if(NOT ${var}_dir)
set(${var}_dir "${${var}_default}")
endif()
if(NOT IS_ABSOLUTE "${${var}_dir}")
get_filename_component(${var}_dir "${top}/${${var}_dir}" ABSOLUTE)
endif()
set_property(TARGET ${name} PROPERTY _EP_${VAR}_DIR "${${var}_dir}")
endforeach()
if(build_in_source)
get_property(source_dir TARGET ${name} PROPERTY _EP_SOURCE_DIR)
set_property(TARGET ${name} PROPERTY _EP_BINARY_DIR "${source_dir}")
endif()
# Make the directories at CMake configure time *and* add a custom command
# to make them at build time. They need to exist at makefile generation
# time for Borland make and wmake so that CMake may generate makefiles
# with "cd C:\short\paths\with\no\spaces" commands in them.
#
# Additionally, the add_custom_command is still used in case somebody
# removes one of the necessary directories and tries to rebuild without
# re-running cmake.
foreach(var ${places})
string(TOUPPER "${var}" VAR)
get_property(dir TARGET ${name} PROPERTY _EP_${VAR}_DIR)
file(MAKE_DIRECTORY "${dir}")
if(NOT EXISTS "${dir}")
message(FATAL_ERROR "dir '${dir}' does not exist after file(MAKE_DIRECTORY)")
endif()
endforeach()
endfunction()
# IMPORTANT: this MUST be a macro and not a function because of the
# in-place replacements that occur in each ${var}
#
macro(_ep_replace_location_tags target_name)
set(vars ${ARGN})
foreach(var ${vars})
if(${var})
foreach(dir SOURCE_DIR BINARY_DIR INSTALL_DIR TMP_DIR)
get_property(val TARGET ${target_name} PROPERTY _EP_${dir})
string(REPLACE "<${dir}>" "${val}" ${var} "${${var}}")
endforeach()
endif()
endforeach()
endmacro()
function(_ep_command_line_to_initial_cache var args force)
set(script_initial_cache "")
set(regex "^([^:]+):([^=]+)=(.*)$")
set(setArg "")
set(forceArg "")
if(force)
set(forceArg "FORCE")
endif()
foreach(line ${args})
if("${line}" MATCHES "^-D(.*)")
set(line "${CMAKE_MATCH_1}")
if(setArg)
# This is required to build up lists in variables, or complete an entry
set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})")
set(script_initial_cache "${script_initial_cache}\n${setArg}")
set(accumulator "")
set(setArg "")
endif()
if("${line}" MATCHES "${regex}")
set(name "${CMAKE_MATCH_1}")
set(type "${CMAKE_MATCH_2}")
set(value "${CMAKE_MATCH_3}")
set(setArg "set(${name} \"${value}")
else()
message(WARNING "Line '${line}' does not match regex. Ignoring.")
endif()
else()
# Assume this is a list to append to the last var
set(accumulator "${accumulator};${line}")
endif()
endforeach()
# Catch the final line of the args
if(setArg)
set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})")
set(script_initial_cache "${script_initial_cache}\n${setArg}")
endif()
set(${var} ${script_initial_cache} PARENT_SCOPE)
endfunction()
function(_ep_write_initial_cache target_name script_filename script_initial_cache)
# Write out values into an initial cache, that will be passed to CMake with -C
# Replace location tags.
_ep_replace_location_tags(${target_name} script_initial_cache)
# Write out the initial cache file to the location specified.
if(NOT EXISTS "${script_filename}.in")
file(WRITE "${script_filename}.in" "\@script_initial_cache\@\n")
endif()
configure_file("${script_filename}.in" "${script_filename}")
endfunction()
function(ExternalProject_Get_Property name)
foreach(var ${ARGN})
string(TOUPPER "${var}" VAR)
get_property(${var} TARGET ${name} PROPERTY _EP_${VAR})
if(NOT ${var})
message(FATAL_ERROR "External project \"${name}\" has no ${var}")
endif()
set(${var} "${${var}}" PARENT_SCOPE)
endforeach()
endfunction()
function(_ep_get_configure_command_id name cfg_cmd_id_var)
get_target_property(cmd ${name} _EP_CONFIGURE_COMMAND)
if(cmd STREQUAL "")
# Explicit empty string means no configure step for this project
set(${cfg_cmd_id_var} "none" PARENT_SCOPE)
else()
if(NOT cmd)
# Default is "use cmake":
set(${cfg_cmd_id_var} "cmake" PARENT_SCOPE)
else()
# Otherwise we have to analyze the value:
if(cmd MATCHES "^[^;]*/configure")
set(${cfg_cmd_id_var} "configure" PARENT_SCOPE)
elseif(cmd MATCHES "^[^;]*/cmake" AND NOT cmd MATCHES ";-[PE];")
set(${cfg_cmd_id_var} "cmake" PARENT_SCOPE)
elseif(cmd MATCHES "config")
set(${cfg_cmd_id_var} "configure" PARENT_SCOPE)
else()
set(${cfg_cmd_id_var} "unknown:${cmd}" PARENT_SCOPE)
endif()
endif()
endif()
endfunction()
function(_ep_get_build_command name step cmd_var)
set(cmd "${${cmd_var}}")
if(NOT cmd)
set(args)
_ep_get_configure_command_id(${name} cfg_cmd_id)
if(cfg_cmd_id STREQUAL "cmake")
# CMake project. Select build command based on generator.
get_target_property(cmake_generator ${name} _EP_CMAKE_GENERATOR)
if("${CMAKE_GENERATOR}" MATCHES "Make" AND
("${cmake_generator}" MATCHES "Make" OR NOT cmake_generator))
# The project uses the same Makefile generator. Use recursive make.
set(cmd "$(MAKE)")
if(step STREQUAL "INSTALL")
set(args install)
endif()
if(step STREQUAL "TEST")
set(args test)
endif()
else()
# Drive the project with "cmake --build".
get_target_property(cmake_command ${name} _EP_CMAKE_COMMAND)
if(cmake_command)
set(cmd "${cmake_command}")
else()
set(cmd "${CMAKE_COMMAND}")
endif()
set(args --build ${binary_dir} --config ${CMAKE_CFG_INTDIR})
if(step STREQUAL "INSTALL")
list(APPEND args --target install)
endif()
# But for "TEST" drive the project with corresponding "ctest".
if(step STREQUAL "TEST")
string(REGEX REPLACE "^(.*/)cmake([^/]*)$" "\\1ctest\\2" cmd "${cmd}")
set(args "")
endif()
endif()
else()
# Non-CMake project. Guess "make" and "make install" and "make test".
if("${CMAKE_GENERATOR}" MATCHES "Makefiles")
# Try to get the parallel arguments
set(cmd "$(MAKE)")
else()
set(cmd "make")
endif()
if(step STREQUAL "INSTALL")
set(args install)
endif()
if(step STREQUAL "TEST")
set(args test)
endif()
endif()
# Use user-specified arguments instead of default arguments, if any.
get_property(have_args TARGET ${name} PROPERTY _EP_${step}_ARGS SET)
if(have_args)
get_target_property(args ${name} _EP_${step}_ARGS)
endif()
list(APPEND cmd ${args})
endif()
set(${cmd_var} "${cmd}" PARENT_SCOPE)
endfunction()
function(_ep_write_log_script name step cmd_var)
ExternalProject_Get_Property(${name} stamp_dir)
set(command "${${cmd_var}}")
set(make "")
set(code_cygpath_make "")
if("${command}" MATCHES "^\\$\\(MAKE\\)")
# GNU make recognizes the string "$(MAKE)" as recursive make, so
# ensure that it appears directly in the makefile.
string(REGEX REPLACE "^\\$\\(MAKE\\)" "\${make}" command "${command}")
set(make "-Dmake=$(MAKE)")
if(WIN32 AND NOT CYGWIN)
set(code_cygpath_make "
if(\${make} MATCHES \"^/\")
execute_process(
COMMAND cygpath -w \${make}
OUTPUT_VARIABLE cygpath_make
ERROR_VARIABLE cygpath_make
RESULT_VARIABLE cygpath_error
OUTPUT_STRIP_TRAILING_WHITESPACE
)
if(NOT cygpath_error)
set(make \${cygpath_make})
endif()
endif()
")
endif()
endif()
set(config "")
if("${CMAKE_CFG_INTDIR}" MATCHES "^\\$")
string(REPLACE "${CMAKE_CFG_INTDIR}" "\${config}" command "${command}")
set(config "-Dconfig=${CMAKE_CFG_INTDIR}")
endif()
# Wrap multiple 'COMMAND' lines up into a second-level wrapper
# script so all output can be sent to one log file.
if("${command}" MATCHES ";COMMAND;")
set(code_execute_process "
${code_cygpath_make}
execute_process(COMMAND \${command} RESULT_VARIABLE result)
if(result)
set(msg \"Command failed (\${result}):\\n\")
foreach(arg IN LISTS command)
set(msg \"\${msg} '\${arg}'\")
endforeach()
message(FATAL_ERROR \"\${msg}\")
endif()
")
set(code "")
set(cmd "")
set(sep "")
foreach(arg IN LISTS command)
if("x${arg}" STREQUAL "xCOMMAND")
set(code "${code}set(command \"${cmd}\")${code_execute_process}")
set(cmd "")
set(sep "")
else()
set(cmd "${cmd}${sep}${arg}")
set(sep ";")
endif()
endforeach()
set(code "${code}set(command \"${cmd}\")${code_execute_process}")
file(WRITE ${stamp_dir}/${name}-${step}-impl.cmake "${code}")
set(command ${CMAKE_COMMAND} "-Dmake=\${make}" "-Dconfig=\${config}" -P ${stamp_dir}/${name}-${step}-impl.cmake)
endif()
# Wrap the command in a script to log output to files.
set(script ${stamp_dir}/${name}-${step}.cmake)
set(logbase ${stamp_dir}/${name}-${step})
file(WRITE ${script} "
${code_cygpath_make}
set(command \"${command}\")
execute_process(
COMMAND \${command}
RESULT_VARIABLE result
OUTPUT_FILE \"${logbase}-out.log\"
ERROR_FILE \"${logbase}-err.log\"
)
if(result)
set(msg \"Command failed: \${result}\\n\")
foreach(arg IN LISTS command)
set(msg \"\${msg} '\${arg}'\")
endforeach()
set(msg \"\${msg}\\nSee also\\n ${logbase}-*.log\\n\")
message(FATAL_ERROR \"\${msg}\")
else()
set(msg \"${name} ${step} command succeeded. See also ${logbase}-*.log\\n\")
message(STATUS \"\${msg}\")
endif()
")
set(command ${CMAKE_COMMAND} ${make} ${config} -P ${script})
set(${cmd_var} "${command}" PARENT_SCOPE)
endfunction()
# This module used to use "/${CMAKE_CFG_INTDIR}" directly and produced
# makefiles with "/./" in paths for custom command dependencies. Which
# resulted in problems with parallel make -j invocations.
#
# This function was added so that the suffix (search below for ${cfgdir}) is
# only set to "/${CMAKE_CFG_INTDIR}" when ${CMAKE_CFG_INTDIR} is not going to
# be "." (multi-configuration build systems like Visual Studio and Xcode...)
#
function(_ep_get_configuration_subdir_suffix suffix_var)
set(suffix "")
if(CMAKE_CONFIGURATION_TYPES)
set(suffix "/${CMAKE_CFG_INTDIR}")
endif()
set(${suffix_var} "${suffix}" PARENT_SCOPE)
endfunction()
function(_ep_get_step_stampfile name step stampfile_var)
ExternalProject_Get_Property(${name} stamp_dir)
_ep_get_configuration_subdir_suffix(cfgdir)
set(stampfile "${stamp_dir}${cfgdir}/${name}-${step}")
set(${stampfile_var} "${stampfile}" PARENT_SCOPE)
endfunction()
function(ExternalProject_Add_StepTargets name)
set(steps ${ARGN})
if("${ARGV1}" STREQUAL "NO_DEPENDS")
set(no_deps 1)
list(REMOVE_AT steps 0)
endif()
foreach(step ${steps})
if(no_deps AND "${step}" MATCHES "^(configure|build|install|test)$")
message(AUTHOR_WARNING "Using NO_DEPENDS for \"${step}\" step might break parallel builds")
endif()
_ep_get_step_stampfile(${name} ${step} stamp_file)
add_custom_target(${name}-${step}
DEPENDS ${stamp_file})
set_property(TARGET ${name}-${step} PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP 1)
set_property(TARGET ${name}-${step} PROPERTY LABELS ${name})
set_property(TARGET ${name}-${step} PROPERTY FOLDER "ExternalProjectTargets/${name}")
2011-11-11 09:00:49 +04:00
# Depend on other external projects (target-level).
if(NOT no_deps)
get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
foreach(arg IN LISTS deps)
add_dependencies(${name}-${step} ${arg})
endforeach()
endif()
endforeach()
endfunction()
function(ExternalProject_Add_Step name step)
set(cmf_dir ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles)
_ep_get_configuration_subdir_suffix(cfgdir)
set(complete_stamp_file "${cmf_dir}${cfgdir}/${name}-complete")
_ep_get_step_stampfile(${name} ${step} stamp_file)
_ep_parse_arguments(ExternalProject_Add_Step
${name} _EP_${step}_ "${ARGN}")
get_property(exclude_from_main TARGET ${name} PROPERTY _EP_${step}_EXCLUDE_FROM_MAIN)
if(NOT exclude_from_main)
add_custom_command(APPEND
OUTPUT ${complete_stamp_file}
DEPENDS ${stamp_file}
)
endif()
# Steps depending on this step.
get_property(dependers TARGET ${name} PROPERTY _EP_${step}_DEPENDERS)
foreach(depender IN LISTS dependers)
_ep_get_step_stampfile(${name} ${depender} depender_stamp_file)
add_custom_command(APPEND
OUTPUT ${depender_stamp_file}
DEPENDS ${stamp_file}
)
endforeach()
# Dependencies on files.
get_property(depends TARGET ${name} PROPERTY _EP_${step}_DEPENDS)
# Byproducts of the step.
get_property(byproducts TARGET ${name} PROPERTY _EP_${step}_BYPRODUCTS)
# Dependencies on steps.
get_property(dependees TARGET ${name} PROPERTY _EP_${step}_DEPENDEES)
foreach(dependee IN LISTS dependees)
_ep_get_step_stampfile(${name} ${dependee} dependee_stamp_file)
list(APPEND depends ${dependee_stamp_file})
endforeach()
# The command to run.
get_property(command TARGET ${name} PROPERTY _EP_${step}_COMMAND)
if(command)
set(comment "Performing ${step} step for '${name}'")
else()
set(comment "No ${step} step for '${name}'")
endif()
get_property(work_dir TARGET ${name} PROPERTY _EP_${step}_WORKING_DIRECTORY)
# Replace list separators.
get_property(sep TARGET ${name} PROPERTY _EP_LIST_SEPARATOR)
if(sep AND command)
string(REPLACE "${sep}" "\\;" command "${command}")
endif()
# Replace location tags.
_ep_replace_location_tags(${name} comment command work_dir)
# Custom comment?
get_property(comment_set TARGET ${name} PROPERTY _EP_${step}_COMMENT SET)
if(comment_set)
get_property(comment TARGET ${name} PROPERTY _EP_${step}_COMMENT)
endif()
# Run every time?
get_property(always TARGET ${name} PROPERTY _EP_${step}_ALWAYS)
if(always)
set_property(SOURCE ${stamp_file} PROPERTY SYMBOLIC 1)
set(touch)
else()
set(touch ${CMAKE_COMMAND} -E touch ${stamp_file})
endif()
# Wrap with log script?
get_property(log TARGET ${name} PROPERTY _EP_${step}_LOG)
if(command AND log)
_ep_write_log_script(${name} ${step} command)
endif()
if("${command}" STREQUAL "")
# Some generators (i.e. Xcode) will not generate a file level target
# if no command is set, and therefore the dependencies on this
# target will be broken.
# The empty command is replaced by an echo command here in order to
# avoid this issue.
set(command ${CMAKE_COMMAND} -E echo_append)
endif()
add_custom_command(
OUTPUT ${stamp_file}
BYPRODUCTS ${byproducts}
COMMENT ${comment}
COMMAND ${command}
COMMAND ${touch}
DEPENDS ${depends}
WORKING_DIRECTORY ${work_dir}
VERBATIM
)
set_property(TARGET ${name} APPEND PROPERTY _EP_STEPS ${step})
# Add custom "step target"?
get_property(step_targets TARGET ${name} PROPERTY _EP_STEP_TARGETS)
if(NOT step_targets)
get_property(step_targets DIRECTORY PROPERTY EP_STEP_TARGETS)
endif()
foreach(st ${step_targets})
if("${st}" STREQUAL "${step}")
ExternalProject_Add_StepTargets(${name} ${step})
break()
endif()
endforeach()
get_property(independent_step_targets TARGET ${name} PROPERTY _EP_INDEPENDENT_STEP_TARGETS)
if(NOT independent_step_targets)
get_property(independent_step_targets DIRECTORY PROPERTY EP_INDEPENDENT_STEP_TARGETS)
endif()
foreach(st ${independent_step_targets})
if("${st}" STREQUAL "${step}")
ExternalProject_Add_StepTargets(${name} NO_DEPENDS ${step})
break()
endif()
endforeach()
endfunction()
function(ExternalProject_Add_StepDependencies name step)
set(dependencies ${ARGN})
# Sanity checks on "name" and "step".
if(NOT TARGET ${name})
message(FATAL_ERROR "Cannot find target \"${name}\". Perhaps it has not yet been created using ExternalProject_Add.")
endif()
get_property(is_ep TARGET ${name} PROPERTY _EP_IS_EXTERNAL_PROJECT)
if(NOT is_ep)
message(FATAL_ERROR "Target \"${name}\" was not generated by ExternalProject_Add.")
endif()
get_property(steps TARGET ${name} PROPERTY _EP_STEPS)
list(FIND steps ${step} is_step)
if(NOT is_step)
message(FATAL_ERROR "External project \"${name}\" does not have a step \"${step}\".")
endif()
if(TARGET ${name}-${step})
get_property(is_ep_step TARGET ${name}-${step} PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP)
if(NOT is_ep_step)
message(FATAL_ERROR "Target \"${name}\" was not generated by ExternalProject_Add_StepTargets.")
endif()
endif()
# Always add file-level dependency, but add target-level dependency
# only if the target exists for that step.
_ep_get_step_stampfile(${name} ${step} stamp_file)
foreach(dep ${dependencies})
add_custom_command(APPEND
OUTPUT ${stamp_file}
DEPENDS ${dep})
if(TARGET ${name}-${step})
foreach(dep ${dependencies})
add_dependencies(${name}-${step} ${dep})
endforeach()
endif()
endforeach()
endfunction()
function(_ep_add_mkdir_command name)
ExternalProject_Get_Property(${name}
source_dir binary_dir install_dir stamp_dir download_dir tmp_dir)
_ep_get_configuration_subdir_suffix(cfgdir)
ExternalProject_Add_Step(${name} mkdir
COMMENT "Creating directories for '${name}'"
COMMAND ${CMAKE_COMMAND} -E make_directory ${source_dir}
COMMAND ${CMAKE_COMMAND} -E make_directory ${binary_dir}
COMMAND ${CMAKE_COMMAND} -E make_directory ${install_dir}
COMMAND ${CMAKE_COMMAND} -E make_directory ${tmp_dir}
COMMAND ${CMAKE_COMMAND} -E make_directory ${stamp_dir}${cfgdir}
COMMAND ${CMAKE_COMMAND} -E make_directory ${download_dir}
)
endfunction()
function(_ep_get_git_version git_EXECUTABLE git_version_var)
if(git_EXECUTABLE)
execute_process(
COMMAND "${git_EXECUTABLE}" --version
OUTPUT_VARIABLE ov
ERROR_VARIABLE ev
OUTPUT_STRIP_TRAILING_WHITESPACE
)
string(REGEX REPLACE "^git version (.+)$" "\\1" version "${ov}")
set(${git_version_var} "${version}" PARENT_SCOPE)
endif()
endfunction()
function(_ep_is_dir_empty dir empty_var)
file(GLOB gr "${dir}/*")
if("${gr}" STREQUAL "")
set(${empty_var} 1 PARENT_SCOPE)
else()
set(${empty_var} 0 PARENT_SCOPE)
endif()
endfunction()
function(_ep_add_download_command name)
ExternalProject_Get_Property(${name} source_dir stamp_dir download_dir tmp_dir)
get_property(cmd_set TARGET ${name} PROPERTY _EP_DOWNLOAD_COMMAND SET)
get_property(cmd TARGET ${name} PROPERTY _EP_DOWNLOAD_COMMAND)
get_property(cvs_repository TARGET ${name} PROPERTY _EP_CVS_REPOSITORY)
get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY)
get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
get_property(hg_repository TARGET ${name} PROPERTY _EP_HG_REPOSITORY )
get_property(url TARGET ${name} PROPERTY _EP_URL)
get_property(fname TARGET ${name} PROPERTY _EP_DOWNLOAD_NAME)
# TODO: Perhaps file:// should be copied to download dir before extraction.
string(REGEX REPLACE "^file://" "" url "${url}")
set(depends)
set(comment)
set(work_dir)
if(cmd_set)
set(work_dir ${download_dir})
elseif(cvs_repository)
find_package(CVS QUIET)
if(NOT CVS_EXECUTABLE)
message(FATAL_ERROR "error: could not find cvs for checkout of ${name}")
endif()
get_target_property(cvs_module ${name} _EP_CVS_MODULE)
if(NOT cvs_module)
message(FATAL_ERROR "error: no CVS_MODULE")
endif()
get_property(cvs_tag TARGET ${name} PROPERTY _EP_CVS_TAG)
set(repository ${cvs_repository})
set(module ${cvs_module})
set(tag ${cvs_tag})
configure_file(
"${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
"${stamp_dir}/${name}-cvsinfo.txt"
@ONLY
)
get_filename_component(src_name "${source_dir}" NAME)
get_filename_component(work_dir "${source_dir}" PATH)
set(comment "Performing download step (CVS checkout) for '${name}'")
set(cmd ${CVS_EXECUTABLE} -d ${cvs_repository} -q co ${cvs_tag} -d ${src_name} ${cvs_module})
list(APPEND depends ${stamp_dir}/${name}-cvsinfo.txt)
elseif(svn_repository)
find_package(Subversion QUIET)
if(NOT Subversion_SVN_EXECUTABLE)
message(FATAL_ERROR "error: could not find svn for checkout of ${name}")
endif()
get_property(svn_revision TARGET ${name} PROPERTY _EP_SVN_REVISION)
get_property(svn_username TARGET ${name} PROPERTY _EP_SVN_USERNAME)
get_property(svn_password TARGET ${name} PROPERTY _EP_SVN_PASSWORD)
get_property(svn_trust_cert TARGET ${name} PROPERTY _EP_SVN_TRUST_CERT)
set(repository "${svn_repository} user=${svn_username} password=${svn_password}")
set(module)
set(tag ${svn_revision})
configure_file(
"${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
"${stamp_dir}/${name}-svninfo.txt"
@ONLY
)
get_filename_component(src_name "${source_dir}" NAME)
get_filename_component(work_dir "${source_dir}" PATH)
set(comment "Performing download step (SVN checkout) for '${name}'")
set(svn_user_pw_args "")
if(DEFINED svn_username)
set(svn_user_pw_args ${svn_user_pw_args} "--username=${svn_username}")
endif()
if(DEFINED svn_password)
set(svn_user_pw_args ${svn_user_pw_args} "--password=${svn_password}")
endif()
if(svn_trust_cert)
set(svn_trust_cert_args --trust-server-cert)
endif()
set(cmd ${Subversion_SVN_EXECUTABLE} co ${svn_repository} ${svn_revision}
--non-interactive ${svn_trust_cert_args} ${svn_user_pw_args} ${src_name})
list(APPEND depends ${stamp_dir}/${name}-svninfo.txt)
elseif(git_repository)
find_package(Git QUIET)
if(NOT GIT_EXECUTABLE)
message(FATAL_ERROR "error: could not find git for clone of ${name}")
endif()
# The git submodule update '--recursive' flag requires git >= v1.6.5
#
_ep_get_git_version("${GIT_EXECUTABLE}" git_version)
if(git_version VERSION_LESS 1.6.5)
message(FATAL_ERROR "error: git version 1.6.5 or later required for 'git submodule update --recursive': git_version='${git_version}'")
endif()
get_property(git_tag TARGET ${name} PROPERTY _EP_GIT_TAG)
if(NOT git_tag)
set(git_tag "master")
endif()
get_property(git_submodules TARGET ${name} PROPERTY _EP_GIT_SUBMODULES)
# For the download step, and the git clone operation, only the repository
# should be recorded in a configured RepositoryInfo file. If the repo
# changes, the clone script should be run again. But if only the tag
# changes, avoid running the clone script again. Let the 'always' running
# update step checkout the new tag.
#
set(repository ${git_repository})
set(module)
set(tag)
configure_file(
"${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
"${stamp_dir}/${name}-gitinfo.txt"
@ONLY
)
get_filename_component(src_name "${source_dir}" NAME)
get_filename_component(work_dir "${source_dir}" PATH)
# Since git clone doesn't succeed if the non-empty source_dir exists,
# create a cmake script to invoke as download command.
# The script will delete the source directory and then call git clone.
#
_ep_write_gitclone_script(${tmp_dir}/${name}-gitclone.cmake ${source_dir}
${GIT_EXECUTABLE} ${git_repository} ${git_tag} "${git_submodules}" ${src_name} ${work_dir}
${stamp_dir}/${name}-gitinfo.txt ${stamp_dir}/${name}-gitclone-lastrun.txt
)
set(comment "Performing download step (git clone) for '${name}'")
set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-gitclone.cmake)
list(APPEND depends ${stamp_dir}/${name}-gitinfo.txt)
elseif(hg_repository)
find_package(Hg QUIET)
if(NOT HG_EXECUTABLE)
message(FATAL_ERROR "error: could not find hg for clone of ${name}")
endif()
get_property(hg_tag TARGET ${name} PROPERTY _EP_HG_TAG)
if(NOT hg_tag)
set(hg_tag "tip")
endif()
# For the download step, and the hg clone operation, only the repository
# should be recorded in a configured RepositoryInfo file. If the repo
# changes, the clone script should be run again. But if only the tag
# changes, avoid running the clone script again. Let the 'always' running
# update step checkout the new tag.
#
set(repository ${hg_repository})
set(module)
set(tag)
configure_file(
"${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
"${stamp_dir}/${name}-hginfo.txt"
@ONLY
)
get_filename_component(src_name "${source_dir}" NAME)
get_filename_component(work_dir "${source_dir}" PATH)
# Since hg clone doesn't succeed if the non-empty source_dir exists,
# create a cmake script to invoke as download command.
# The script will delete the source directory and then call hg clone.
#
_ep_write_hgclone_script(${tmp_dir}/${name}-hgclone.cmake ${source_dir}
${HG_EXECUTABLE} ${hg_repository} ${hg_tag} ${src_name} ${work_dir}
${stamp_dir}/${name}-hginfo.txt ${stamp_dir}/${name}-hgclone-lastrun.txt
)
set(comment "Performing download step (hg clone) for '${name}'")
set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-hgclone.cmake)
list(APPEND depends ${stamp_dir}/${name}-hginfo.txt)
elseif(url)
get_filename_component(work_dir "${source_dir}" PATH)
get_property(hash TARGET ${name} PROPERTY _EP_URL_HASH)
if(hash AND NOT "${hash}" MATCHES "${_ep_hash_regex}")
message(FATAL_ERROR "URL_HASH is set to\n ${hash}\n"
"but must be ALGO=value where ALGO is\n ${_ep_hash_algos}\n"
"and value is a hex string.")
endif()
get_property(md5 TARGET ${name} PROPERTY _EP_URL_MD5)
if(md5 AND NOT "MD5=${md5}" MATCHES "${_ep_hash_regex}")
message(FATAL_ERROR "URL_MD5 is set to\n ${md5}\nbut must be a hex string.")
endif()
if(md5 AND NOT hash)
set(hash "MD5=${md5}")
endif()
set(repository "external project URL")
set(module "${url}")
set(tag "${hash}")
set(retries 0)
set(download_script "")
configure_file(
"${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
"${stamp_dir}/${name}-urlinfo.txt"
@ONLY
)
list(APPEND depends ${stamp_dir}/${name}-urlinfo.txt)
if(IS_DIRECTORY "${url}")
get_filename_component(abs_dir "${url}" ABSOLUTE)
set(comment "Performing download step (DIR copy) for '${name}'")
set(cmd ${CMAKE_COMMAND} -E remove_directory ${source_dir}
COMMAND ${CMAKE_COMMAND} -E copy_directory ${abs_dir} ${source_dir})
else()
if("${url}" MATCHES "^[a-z]+://")
# TODO: Should download and extraction be different steps?
if("x${fname}" STREQUAL "x")
string(REGEX MATCH "[^/\\?]*$" fname "${url}")
endif()
if(NOT "${fname}" MATCHES "(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
string(REGEX MATCH "([^/\\?]+(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip))/.*$" match_result "${url}")
set(fname "${CMAKE_MATCH_1}")
endif()
if(NOT "${fname}" MATCHES "(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
message(FATAL_ERROR "Could not extract tarball filename from url:\n ${url}")
endif()
string(REPLACE ";" "-" fname "${fname}")
set(file ${download_dir}/${fname})
get_property(timeout TARGET ${name} PROPERTY _EP_TIMEOUT)
get_property(no_progress TARGET ${name} PROPERTY _EP_DOWNLOAD_NO_PROGRESS)
get_property(tls_verify TARGET ${name} PROPERTY _EP_TLS_VERIFY)
get_property(tls_cainfo TARGET ${name} PROPERTY _EP_TLS_CAINFO)
set(download_script "${stamp_dir}/download-${name}.cmake")
_ep_write_downloadfile_script("${download_script}" "${url}" "${file}" "${timeout}" "${no_progress}" "${hash}" "${tls_verify}" "${tls_cainfo}")
set(cmd ${CMAKE_COMMAND} -P "${download_script}"
COMMAND)
set(retries 3)
set(comment "Performing download step (download, verify and extract) for '${name}'")
else()
set(file "${url}")
set(comment "Performing download step (verify and extract) for '${name}'")
endif()
_ep_write_verifyfile_script("${stamp_dir}/verify-${name}.cmake" "${file}" "${hash}" "${retries}" "${download_script}")
list(APPEND cmd ${CMAKE_COMMAND} -P ${stamp_dir}/verify-${name}.cmake
COMMAND)
_ep_write_extractfile_script("${stamp_dir}/extract-${name}.cmake" "${name}" "${file}" "${source_dir}")
list(APPEND cmd ${CMAKE_COMMAND} -P ${stamp_dir}/extract-${name}.cmake)
endif()
else()
_ep_is_dir_empty("${source_dir}" empty)
if(${empty})
message(SEND_ERROR "error: no download info for '${name}' -- please specify existing/non-empty SOURCE_DIR or one of URL, CVS_REPOSITORY and CVS_MODULE, SVN_REPOSITORY, GIT_REPOSITORY, HG_REPOSITORY or DOWNLOAD_COMMAND")
endif()
endif()
get_property(log TARGET ${name} PROPERTY _EP_LOG_DOWNLOAD)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
ExternalProject_Add_Step(${name} download
COMMENT ${comment}
COMMAND ${cmd}
WORKING_DIRECTORY ${work_dir}
DEPENDS ${depends}
DEPENDEES mkdir
${log}
)
endfunction()
function(_ep_add_update_command name)
ExternalProject_Get_Property(${name} source_dir tmp_dir)
get_property(cmd_set TARGET ${name} PROPERTY _EP_UPDATE_COMMAND SET)
get_property(cmd TARGET ${name} PROPERTY _EP_UPDATE_COMMAND)
get_property(cvs_repository TARGET ${name} PROPERTY _EP_CVS_REPOSITORY)
get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY)
get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
get_property(hg_repository TARGET ${name} PROPERTY _EP_HG_REPOSITORY )
get_property(update_disconnected_set TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED SET)
if(update_disconnected_set)
get_property(update_disconnected TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED)
else()
get_property(update_disconnected DIRECTORY PROPERTY EP_UPDATE_DISCONNECTED)
endif()
set(work_dir)
set(comment)
set(always)
if(cmd_set)
set(work_dir ${source_dir})
elseif(cvs_repository)
if(NOT CVS_EXECUTABLE)
message(FATAL_ERROR "error: could not find cvs for update of ${name}")
endif()
set(work_dir ${source_dir})
set(comment "Performing update step (CVS update) for '${name}'")
get_property(cvs_tag TARGET ${name} PROPERTY _EP_CVS_TAG)
set(cmd ${CVS_EXECUTABLE} -d ${cvs_repository} -q up -dP ${cvs_tag})
set(always 1)
elseif(svn_repository)
if(NOT Subversion_SVN_EXECUTABLE)
message(FATAL_ERROR "error: could not find svn for update of ${name}")
endif()
set(work_dir ${source_dir})
set(comment "Performing update step (SVN update) for '${name}'")
get_property(svn_revision TARGET ${name} PROPERTY _EP_SVN_REVISION)
get_property(svn_username TARGET ${name} PROPERTY _EP_SVN_USERNAME)
get_property(svn_password TARGET ${name} PROPERTY _EP_SVN_PASSWORD)
get_property(svn_trust_cert TARGET ${name} PROPERTY _EP_SVN_TRUST_CERT)
set(svn_user_pw_args "")
if(DEFINED svn_username)
set(svn_user_pw_args ${svn_user_pw_args} "--username=${svn_username}")
endif()
if(DEFINED svn_password)
set(svn_user_pw_args ${svn_user_pw_args} "--password=${svn_password}")
endif()
if(svn_trust_cert)
set(svn_trust_cert_args --trust-server-cert)
endif()
set(cmd ${Subversion_SVN_EXECUTABLE} up ${svn_revision}
--non-interactive ${svn_trust_cert_args} ${svn_user_pw_args})
set(always 1)
elseif(git_repository)
if(NOT GIT_EXECUTABLE)
message(FATAL_ERROR "error: could not find git for fetch of ${name}")
endif()
set(work_dir ${source_dir})
set(comment "Performing update step for '${name}'")
get_property(git_tag TARGET ${name} PROPERTY _EP_GIT_TAG)
if(NOT git_tag)
set(git_tag "master")
endif()
get_property(git_submodules TARGET ${name} PROPERTY _EP_GIT_SUBMODULES)
_ep_write_gitupdate_script(${tmp_dir}/${name}-gitupdate.cmake
${GIT_EXECUTABLE} ${git_tag} "${git_submodules}" ${git_repository} ${work_dir}
)
set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-gitupdate.cmake)
set(always 1)
elseif(hg_repository)
if(NOT HG_EXECUTABLE)
message(FATAL_ERROR "error: could not find hg for pull of ${name}")
endif()
set(work_dir ${source_dir})
set(comment "Performing update step (hg pull) for '${name}'")
get_property(hg_tag TARGET ${name} PROPERTY _EP_HG_TAG)
if(NOT hg_tag)
set(hg_tag "tip")
endif()
if("${HG_VERSION_STRING}" STREQUAL "2.1")
message(WARNING "Mercurial 2.1 does not distinguish an empty pull from a failed pull:
http://mercurial.selenic.com/wiki/UpgradeNotes#A2.1.1:_revert_pull_return_code_change.2C_compile_issue_on_OS_X
http://thread.gmane.org/gmane.comp.version-control.mercurial.devel/47656
Update to Mercurial >= 2.1.1.
")
endif()
set(cmd ${HG_EXECUTABLE} pull
COMMAND ${HG_EXECUTABLE} update ${hg_tag}
)
set(always 1)
endif()
get_property(log TARGET ${name} PROPERTY _EP_LOG_UPDATE)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
ExternalProject_Add_Step(${name} update
COMMENT ${comment}
COMMAND ${cmd}
ALWAYS ${always}
EXCLUDE_FROM_MAIN ${update_disconnected}
WORKING_DIRECTORY ${work_dir}
DEPENDEES download
${log}
)
if(always AND update_disconnected)
_ep_get_step_stampfile(${name} skip-update skip-update_stamp_file)
string(REPLACE "Performing" "Skipping" comment "${comment}")
ExternalProject_Add_Step(${name} skip-update
COMMENT ${comment}
ALWAYS 1
EXCLUDE_FROM_MAIN 1
WORKING_DIRECTORY ${work_dir}
DEPENDEES download
${log}
)
set_property(SOURCE ${skip-update_stamp_file} PROPERTY SYMBOLIC 1)
endif()
endfunction()
function(_ep_add_patch_command name)
ExternalProject_Get_Property(${name} source_dir)
get_property(cmd_set TARGET ${name} PROPERTY _EP_PATCH_COMMAND SET)
get_property(cmd TARGET ${name} PROPERTY _EP_PATCH_COMMAND)
set(work_dir)
if(cmd_set)
set(work_dir ${source_dir})
endif()
ExternalProject_Add_Step(${name} patch
COMMAND ${cmd}
WORKING_DIRECTORY ${work_dir}
DEPENDEES download
)
endfunction()
# TODO: Make sure external projects use the proper compiler
function(_ep_add_configure_command name)
ExternalProject_Get_Property(${name} source_dir binary_dir tmp_dir)
# Depend on other external projects (file-level).
set(file_deps)
get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
foreach(dep IN LISTS deps)
get_property(is_ep TARGET ${dep} PROPERTY _EP_IS_EXTERNAL_PROJECT)
if(is_ep)
_ep_get_step_stampfile(${dep} "done" done_stamp_file)
list(APPEND file_deps ${done_stamp_file})
endif()
endforeach()
get_property(cmd_set TARGET ${name} PROPERTY _EP_CONFIGURE_COMMAND SET)
if(cmd_set)
get_property(cmd TARGET ${name} PROPERTY _EP_CONFIGURE_COMMAND)
else()
get_target_property(cmake_command ${name} _EP_CMAKE_COMMAND)
if(cmake_command)
set(cmd "${cmake_command}")
else()
set(cmd "${CMAKE_COMMAND}")
endif()
get_property(cmake_args TARGET ${name} PROPERTY _EP_CMAKE_ARGS)
list(APPEND cmd ${cmake_args})
# If there are any CMAKE_CACHE_ARGS or CMAKE_CACHE_DEFAULT_ARGS,
# write an initial cache and use it
get_property(cmake_cache_args TARGET ${name} PROPERTY _EP_CMAKE_CACHE_ARGS)
get_property(cmake_cache_default_args TARGET ${name} PROPERTY _EP_CMAKE_CACHE_DEFAULT_ARGS)
if(cmake_cache_args OR cmake_cache_default_args)
set(_ep_cache_args_script "${tmp_dir}/${name}-cache.cmake")
if(cmake_cache_args)
_ep_command_line_to_initial_cache(script_initial_cache_force "${cmake_cache_args}" 1)
endif()
if(cmake_cache_default_args)
_ep_command_line_to_initial_cache(script_initial_cache_default "${cmake_cache_default_args}" 0)
endif()
_ep_write_initial_cache(${name} "${_ep_cache_args_script}" "${script_initial_cache_force}${script_initial_cache_default}")
list(APPEND cmd "-C${_ep_cache_args_script}")
endif()
get_target_property(cmake_generator ${name} _EP_CMAKE_GENERATOR)
get_target_property(cmake_generator_platform ${name} _EP_CMAKE_GENERATOR_PLATFORM)
get_target_property(cmake_generator_toolset ${name} _EP_CMAKE_GENERATOR_TOOLSET)
if(cmake_generator)
list(APPEND cmd "-G${cmake_generator}")
if(cmake_generator_platform)
list(APPEND cmd "-A${cmake_generator_platform}")
endif()
if(cmake_generator_toolset)
list(APPEND cmd "-T${cmake_generator_toolset}")
endif()
else()
if(CMAKE_EXTRA_GENERATOR)
list(APPEND cmd "-G${CMAKE_EXTRA_GENERATOR} - ${CMAKE_GENERATOR}")
else()
list(APPEND cmd "-G${CMAKE_GENERATOR}")
endif()
if(cmake_generator_platform)
message(FATAL_ERROR "Option CMAKE_GENERATOR_PLATFORM not allowed without CMAKE_GENERATOR.")
endif()
if(CMAKE_GENERATOR_PLATFORM)
list(APPEND cmd "-A${CMAKE_GENERATOR_PLATFORM}")
endif()
if(cmake_generator_toolset)
message(FATAL_ERROR "Option CMAKE_GENERATOR_TOOLSET not allowed without CMAKE_GENERATOR.")
endif()
if(CMAKE_GENERATOR_TOOLSET)
list(APPEND cmd "-T${CMAKE_GENERATOR_TOOLSET}")
endif()
endif()
list(APPEND cmd "${source_dir}")
endif()
# If anything about the configure command changes, (command itself, cmake
# used, cmake args or cmake generator) then re-run the configure step.
# Fixes issue http://public.kitware.com/Bug/view.php?id=10258
#
if(NOT EXISTS ${tmp_dir}/${name}-cfgcmd.txt.in)
file(WRITE ${tmp_dir}/${name}-cfgcmd.txt.in "cmd='\@cmd\@'\n")
endif()
configure_file(${tmp_dir}/${name}-cfgcmd.txt.in ${tmp_dir}/${name}-cfgcmd.txt)
list(APPEND file_deps ${tmp_dir}/${name}-cfgcmd.txt)
list(APPEND file_deps ${_ep_cache_args_script})
get_property(log TARGET ${name} PROPERTY _EP_LOG_CONFIGURE)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(update_disconnected_set TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED SET)
if(update_disconnected_set)
get_property(update_disconnected TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED)
else()
get_property(update_disconnected DIRECTORY PROPERTY EP_UPDATE_DISCONNECTED)
endif()
if(update_disconnected)
set(update_dep skip-update)
else()
set(update_dep update)
endif()
ExternalProject_Add_Step(${name} configure
COMMAND ${cmd}
WORKING_DIRECTORY ${binary_dir}
DEPENDEES ${update_dep} patch
DEPENDS ${file_deps}
${log}
)
endfunction()
function(_ep_add_build_command name)
ExternalProject_Get_Property(${name} binary_dir)
get_property(cmd_set TARGET ${name} PROPERTY _EP_BUILD_COMMAND SET)
if(cmd_set)
get_property(cmd TARGET ${name} PROPERTY _EP_BUILD_COMMAND)
else()
_ep_get_build_command(${name} BUILD cmd)
endif()
get_property(log TARGET ${name} PROPERTY _EP_LOG_BUILD)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(build_always TARGET ${name} PROPERTY _EP_BUILD_ALWAYS)
if(build_always)
set(always 1)
else()
set(always 0)
endif()
get_property(build_byproducts TARGET ${name} PROPERTY _EP_BUILD_BYPRODUCTS)
ExternalProject_Add_Step(${name} build
COMMAND ${cmd}
BYPRODUCTS ${build_byproducts}
WORKING_DIRECTORY ${binary_dir}
DEPENDEES configure
ALWAYS ${always}
${log}
)
endfunction()
function(_ep_add_install_command name)
ExternalProject_Get_Property(${name} binary_dir)
get_property(cmd_set TARGET ${name} PROPERTY _EP_INSTALL_COMMAND SET)
if(cmd_set)
get_property(cmd TARGET ${name} PROPERTY _EP_INSTALL_COMMAND)
else()
_ep_get_build_command(${name} INSTALL cmd)
endif()
get_property(log TARGET ${name} PROPERTY _EP_LOG_INSTALL)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
ExternalProject_Add_Step(${name} install
COMMAND ${cmd}
WORKING_DIRECTORY ${binary_dir}
DEPENDEES build
${log}
)
endfunction()
function(_ep_add_test_command name)
ExternalProject_Get_Property(${name} binary_dir)
get_property(before TARGET ${name} PROPERTY _EP_TEST_BEFORE_INSTALL)
get_property(after TARGET ${name} PROPERTY _EP_TEST_AFTER_INSTALL)
get_property(cmd_set TARGET ${name} PROPERTY _EP_TEST_COMMAND SET)
# Only actually add the test step if one of the test related properties is
# explicitly set. (i.e. the test step is omitted unless requested...)
#
if(cmd_set OR before OR after)
if(cmd_set)
get_property(cmd TARGET ${name} PROPERTY _EP_TEST_COMMAND)
else()
_ep_get_build_command(${name} TEST cmd)
endif()
if(before)
set(dep_args DEPENDEES build DEPENDERS install)
else()
set(dep_args DEPENDEES install)
endif()
get_property(log TARGET ${name} PROPERTY _EP_LOG_TEST)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
ExternalProject_Add_Step(${name} test
COMMAND ${cmd}
WORKING_DIRECTORY ${binary_dir}
${dep_args}
${log}
)
endif()
endfunction()
function(ExternalProject_Add name)
_ep_get_configuration_subdir_suffix(cfgdir)
# Add a custom target for the external project.
set(cmf_dir ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles)
set(complete_stamp_file "${cmf_dir}${cfgdir}/${name}-complete")
# The "ALL" option to add_custom_target just tells it to not set the
# EXCLUDE_FROM_ALL target property. Later, if the EXCLUDE_FROM_ALL
# argument was passed, we explicitly set it for the target.
add_custom_target(${name} ALL DEPENDS ${complete_stamp_file})
set_property(TARGET ${name} PROPERTY _EP_IS_EXTERNAL_PROJECT 1)
set_property(TARGET ${name} PROPERTY LABELS ${name})
set_property(TARGET ${name} PROPERTY FOLDER "ExternalProjectTargets/${name}")
_ep_parse_arguments(ExternalProject_Add ${name} _EP_ "${ARGN}")
_ep_set_directories(${name})
_ep_get_step_stampfile(${name} "done" done_stamp_file)
_ep_get_step_stampfile(${name} "install" install_stamp_file)
# Set the EXCLUDE_FROM_ALL target property if required.
get_property(exclude_from_all TARGET ${name} PROPERTY _EP_EXCLUDE_FROM_ALL)
if(exclude_from_all)
set_property(TARGET ${name} PROPERTY EXCLUDE_FROM_ALL TRUE)
endif()
# The 'complete' step depends on all other steps and creates a
# 'done' mark. A dependent external project's 'configure' step
# depends on the 'done' mark so that it rebuilds when this project
# rebuilds. It is important that 'done' is not the output of any
# custom command so that CMake does not propagate build rules to
2011-11-11 09:00:49 +04:00
# other external project targets, which may cause problems during
# parallel builds. However, the Ninja generator needs to see the entire
# dependency graph, and can cope with custom commands belonging to
# multiple targets, so we add the 'done' mark as an output for Ninja only.
set(complete_outputs ${complete_stamp_file})
2011-11-11 09:00:49 +04:00
if(${CMAKE_GENERATOR} MATCHES "Ninja")
set(complete_outputs ${complete_outputs} ${done_stamp_file})
2011-11-11 09:00:49 +04:00
endif()
add_custom_command(
2011-11-11 09:00:49 +04:00
OUTPUT ${complete_outputs}
COMMENT "Completed '${name}'"
COMMAND ${CMAKE_COMMAND} -E make_directory ${cmf_dir}${cfgdir}
COMMAND ${CMAKE_COMMAND} -E touch ${complete_stamp_file}
COMMAND ${CMAKE_COMMAND} -E touch ${done_stamp_file}
DEPENDS ${install_stamp_file}
VERBATIM
)
# Depend on other external projects (target-level).
get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
foreach(arg IN LISTS deps)
add_dependencies(${name} ${arg})
endforeach()
# Set up custom build steps based on the target properties.
# Each step depends on the previous one.
#
# The target depends on the output of the final step.
# (Already set up above in the DEPENDS of the add_custom_target command.)
#
_ep_add_mkdir_command(${name})
_ep_add_download_command(${name})
_ep_add_update_command(${name})
_ep_add_patch_command(${name})
_ep_add_configure_command(${name})
_ep_add_build_command(${name})
_ep_add_install_command(${name})
# Test is special in that it might depend on build, or it might depend
# on install.
#
_ep_add_test_command(${name})
endfunction()