CMake/Source/cmDocumentVariables.cxx

1587 lines
73 KiB
C++
Raw Normal View History

2007-10-18 17:10:42 +04:00
#include "cmDocumentVariables.h"
#include "cmake.h"
void cmDocumentVariables::DefineVariables(cmake* cm)
2010-09-28 23:44:22 +04:00
{
2007-10-18 17:10:42 +04:00
// Subsection: variables defined by cmake, that give
// information about the project, and cmake
cm->DefineProperty
("CMAKE_AR", cmProperty::VARIABLE,
"Name of archiving tool for static libraries.",
"This specifies name of the program that creates archive "
"or static libraries.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_COMMAND", cmProperty::VARIABLE,
"The full path to the cmake executable.",
"This is the full path to the CMake executable cmake which is "
"useful from custom commands that want to use the cmake -E "
"option for portable system commands. "
2010-09-28 23:44:22 +04:00
"(e.g. /usr/local/bin/cmake", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_BINARY_DIR", cmProperty::VARIABLE,
"The path to the top level of the build tree.",
"This is the full path to the top level of the current CMake "
"build tree. For an in-source build, this would be the same "
2010-09-28 23:44:22 +04:00
"as CMAKE_SOURCE_DIR. ", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_SOURCE_DIR", cmProperty::VARIABLE,
"The path to the top level of the source tree.",
"This is the full path to the top level of the current CMake "
"source tree. For an in-source build, this would be the same "
2010-09-28 23:44:22 +04:00
"as CMAKE_BINARY_DIR. ", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CURRENT_BINARY_DIR", cmProperty::VARIABLE,
"The path to the binary directory currently being processed.",
"This the full path to the build directory that is currently "
"being processed by cmake. Each directory added by "
"add_subdirectory will create a binary directory in the build "
"tree, and as it is being processed this variable will be set. "
"For in-source builds this is the current source directory "
2010-09-28 23:44:22 +04:00
"being processed.", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CURRENT_SOURCE_DIR", cmProperty::VARIABLE,
"The path to the source directory currently being processed.",
"This the full path to the source directory that is currently "
2010-09-28 23:44:22 +04:00
"being processed by cmake. ", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CURRENT_LIST_FILE", cmProperty::VARIABLE,
"Full path to the listfile currently being processed.",
"As CMake processes the listfiles in your project this "
"variable will always be set to the one currently being "
"processed. "
"The value has dynamic scope. "
"When CMake starts processing commands in a source file "
"it sets this variable to the location of the file. "
"When CMake finishes processing commands from the file it "
"restores the previous value. "
"Therefore the value of the variable inside a macro or "
"function is the file invoking the bottom-most entry on "
"the call stack, not the file containing the macro or "
"function definition."
"\n"
"See also CMAKE_PARENT_LIST_FILE.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CURRENT_LIST_LINE", cmProperty::VARIABLE,
"The line number of the current file being processed.",
"This is the line number of the file currently being"
2010-09-28 23:44:22 +04:00
" processed by cmake.", false,
"Variables that Provide Information");
2010-09-28 23:44:22 +04:00
cm->DefineProperty
("CMAKE_CURRENT_LIST_DIR", cmProperty::VARIABLE,
"Full directory of the listfile currently being processed.",
"As CMake processes the listfiles in your project this "
"variable will always be set to the directory where the listfile which "
"is currently being processed (CMAKE_CURRENT_LIST_FILE) is located. "
"The value has dynamic scope. "
"When CMake starts processing commands in a source file "
"it sets this variable to the directory where this file is located. "
"When CMake finishes processing commands from the file it "
"restores the previous value. "
"Therefore the value of the variable inside a macro or "
"function is the directory of the file invoking the bottom-most entry on "
"the call stack, not the directory of the file containing the macro or "
"function definition."
"\n"
"See also CMAKE_CURRENT_LIST_FILE.",false,
"Variables that Provide Information");
cm->DefineProperty
("CMAKE_SCRIPT_MODE_FILE", cmProperty::VARIABLE,
"Full path to the -P script file currently being processed. ",
"When run in -P script mode, CMake sets this variable to the full "
"path of the script file. When run to configure a CMakeLists.txt "
"file, this variable is not set.", false,
"Variables that Provide Information");
cm->DefineProperty
("CMAKE_ARGC", cmProperty::VARIABLE,
"Number of command line arguments passed to CMake in script mode. ",
"When run in -P script mode, CMake sets this variable to the number "
"of command line arguments. See also CMAKE_ARGV0, 1, 2 ... ", false,
"Variables that Provide Information");
cm->DefineProperty
("CMAKE_ARGV0", cmProperty::VARIABLE,
"Command line argument passed to CMake in script mode. ",
"When run in -P script mode, CMake sets this variable to "
"the first command line argument. It then also sets CMAKE_ARGV1, "
"CMAKE_ARGV2, ... and so on, up to the number of command line arguments "
"given. See also CMAKE_ARGC.", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_BUILD_TOOL", cmProperty::VARIABLE,
2009-04-19 20:48:30 +04:00
"Tool used for the actual build process.",
2007-10-18 17:10:42 +04:00
"This variable is set to the program that will be"
" needed to build the output of CMake. If the "
"generator selected was Visual Studio 6, the "
"CMAKE_MAKE_PROGRAM will be set to msdev, for "
"Unix makefiles it will be set to make or gmake, "
"and for Visual Studio 7 it set to devenv. For "
"Nmake Makefiles the value is nmake. This can be "
"useful for adding special flags and commands based"
2010-09-28 23:44:22 +04:00
" on the final build environment. ", false,
"Variables that Provide Information");
cm->DefineProperty
("CMAKE_CROSSCOMPILING", cmProperty::VARIABLE,
"Is CMake currently cross compiling.",
"This variable will be set to true by CMake if CMake is cross "
"compiling. Specifically if the build platform is different "
"from the target platform.", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CACHEFILE_DIR", cmProperty::VARIABLE,
"The directory with the CMakeCache.txt file.",
"This is the full path to the directory that has the "
"CMakeCache.txt file in it. This is the same as "
2010-09-28 23:44:22 +04:00
"CMAKE_BINARY_DIR.", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CACHE_MAJOR_VERSION", cmProperty::VARIABLE,
"Major version of CMake used to create the CMakeCache.txt file",
"This is stores the major version of CMake used to "
"write a CMake cache file. It is only different when "
"a different version of CMake is run on a previously "
2010-09-28 23:44:22 +04:00
"created cache file.", false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CACHE_MINOR_VERSION", cmProperty::VARIABLE,
"Minor version of CMake used to create the CMakeCache.txt file",
"This is stores the minor version of CMake used to "
"write a CMake cache file. It is only different when "
"a different version of CMake is run on a previously "
2010-09-28 23:44:22 +04:00
"created cache file.", false,
"Variables that Provide Information");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CACHE_PATCH_VERSION", cmProperty::VARIABLE,
"Patch version of CMake used to create the CMakeCache.txt file",
"This is stores the patch version of CMake used to "
2007-10-18 17:10:42 +04:00
"write a CMake cache file. It is only different when "
"a different version of CMake is run on a previously "
2010-09-28 23:44:22 +04:00
"created cache file.", false,
"Variables that Provide Information");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CFG_INTDIR", cmProperty::VARIABLE,
"Build-time reference to per-configuration output subdirectory.",
"For native build systems supporting multiple configurations "
"in the build tree (such as Visual Studio and Xcode), "
"the value is a reference to a build-time variable specifying "
"the name of the per-configuration output subdirectory. "
"On Makefile generators this evaluates to \".\" because there "
"is only one configuration in a build tree. "
"Example values:\n"
" $(IntDir) = Visual Studio 6\n"
" $(OutDir) = Visual Studio 7, 8, 9\n"
" $(Configuration) = Visual Studio 10\n"
" $(CONFIGURATION) = Xcode\n"
" . = Make-based tools\n"
"Since these values are evaluated by the native build system, this "
"variable is suitable only for use in command lines that will be "
"evaluated at build time. "
"Example of intended usage:\n"
" add_executable(mytool mytool.c)\n"
" add_custom_command(\n"
" OUTPUT out.txt\n"
" COMMAND ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool\n"
" ${CMAKE_CURRENT_SOURCE_DIR}/in.txt out.txt\n"
" DEPENDS mytool in.txt\n"
" )\n"
" add_custom_target(drive ALL DEPENDS out.txt)\n"
"Note that CMAKE_CFG_INTDIR is no longer necessary for this purpose "
"but has been left for compatibility with existing projects. "
"Instead add_custom_command() recognizes executable target names in "
"its COMMAND option, so "
"\"${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool\" can be "
"replaced by just \"mytool\"."
"\n"
"This variable is read-only. Setting it is undefined behavior. "
"In multi-configuration build systems the value of this variable "
"is passed as the value of preprocessor symbol \"CMAKE_INTDIR\" to "
"the compilation of all source files.",false,
"Variables that Provide Information");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_CTEST_COMMAND", cmProperty::VARIABLE,
"Full path to ctest command installed with cmake.",
"This is the full path to the CTest executable ctest "
"which is useful from custom commands that want "
" to use the cmake -E option for portable system "
"commands.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_DL_LIBS", cmProperty::VARIABLE,
"Name of library containing dlopen and dlcose.",
"The name of the library that has dlopen and "
"dlclose in it, usually -ldl on most UNIX machines.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_EDIT_COMMAND", cmProperty::VARIABLE,
"Full path to cmake-gui or ccmake.",
2007-10-18 17:10:42 +04:00
"This is the full path to the CMake executable "
"that can graphically edit the cache. For example,"
" cmake-gui, ccmake, or cmake -i.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_GENERATOR", cmProperty::VARIABLE,
"The generator used to build the project.",
"The name of the generator that is being used to generate the "
"build files. (e.g. \"Unix Makefiles\", "
"\"Visual Studio 6\", etc.)",false,
"Variables that Provide Information");
2009-11-22 03:07:03 +03:00
cm->DefineProperty
("CMAKE_EXTRA_GENERATOR", cmProperty::VARIABLE,
"The extra generator used to build the project.",
"When using the Eclipse, CodeBlocks or KDevelop generators, CMake "
"generates Makefiles (CMAKE_GENERATOR) and additionally project files "
"for the respective IDE. This IDE project file generator is stored in "
"CMAKE_EXTRA_GENERATOR (e.g. \"Eclipse CDT4\").",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_HOME_DIRECTORY", cmProperty::VARIABLE,
"Path to top of source tree.",
"This is the path to the top level of the source tree.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_LINK_LIBRARY_SUFFIX", cmProperty::VARIABLE,
"The suffix for libraries that you link to.",
"The suffix to use for the end of a library, .lib on Windows.",false,
"Variables that Provide Information");
cm->DefineProperty
("CMAKE_EXECUTABLE_SUFFIX", cmProperty::VARIABLE,
"The suffix for executables on this platform.",
"The suffix to use for the end of an executable if any, "
".exe on Windows."
"\n"
"CMAKE_EXECUTABLE_SUFFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_MAJOR_VERSION", cmProperty::VARIABLE,
"The Major version of cmake (i.e. the 2 in 2.X.X)",
"This specifies the major version of the CMake executable"
" being run.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_MAKE_PROGRAM", cmProperty::VARIABLE,
"See CMAKE_BUILD_TOOL.",
"This variable is around for backwards compatibility, "
"see CMAKE_BUILD_TOOL.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_MINOR_VERSION", cmProperty::VARIABLE,
"The Minor version of cmake (i.e. the 4 in X.4.X).",
"This specifies the minor version of the CMake"
" executable being run.",false,
"Variables that Provide Information");
cm->DefineProperty
("CMAKE_PATCH_VERSION", cmProperty::VARIABLE,
"The patch version of cmake (i.e. the 3 in X.X.3).",
"This specifies the patch version of the CMake"
" executable being run.",false,
"Variables that Provide Information");
New version scheme to support branchy workflow Prepare to switch to the workflow described by "git help workflows". In this workflow, the "master" branch is always used to integrate topics ready for release. Brand new work merges into a "next" branch instead. We need a new versioning scheme to work this way because the version on "master" must always increase. We no longer use an even/odd minor number to distinguish releases from development versions. Since we still support cvs checkout of our source tree we cannot depend on "git describe" to compute a version number based on the history graph. We can use the CCYYMMDD nightly date stamp to get a monotonically increasing version component. The new version format is "major.minor.patch.(tweak|date)". Releases use a tweak level in the half-open range [0,20000000), which is smaller than any current or future date. For tweak=0 we do not show the tweak component, leaving the format "major.minor.patch" for most releases. Development versions use date=CCYYMMDD for the tweak level. The major.minor.patch part of development versions on "master" always matches the most recent release. For example, a first-parent traversal of "master" might see v2.8.1 2.8.1.20100422 v2.8.2 | | | ----o----o----o----o----o----o----o----o---- Since the date appears in the tweak component, the next release can increment the patch level (or any more significant component) to be greater than any version leading to it. Topic branches not ready for release are published only on "next" so we know that all versions on master lead between two releases.
2010-04-23 17:44:23 +04:00
cm->DefineProperty
("CMAKE_TWEAK_VERSION", cmProperty::VARIABLE,
"The tweak version of cmake (i.e. the 1 in X.X.X.1).",
"This specifies the tweak version of the CMake executable being run. "
"Releases use tweak < 20000000 and development versions use the date "
"format CCYYMMDD for the tweak level."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_VERSION", cmProperty::VARIABLE,
"The full version of cmake in major.minor.patch[.tweak[-id]] format.",
"This specifies the full version of the CMake executable being run. "
"This variable is defined by versions 2.6.3 and higher. "
New version scheme to support branchy workflow Prepare to switch to the workflow described by "git help workflows". In this workflow, the "master" branch is always used to integrate topics ready for release. Brand new work merges into a "next" branch instead. We need a new versioning scheme to work this way because the version on "master" must always increase. We no longer use an even/odd minor number to distinguish releases from development versions. Since we still support cvs checkout of our source tree we cannot depend on "git describe" to compute a version number based on the history graph. We can use the CCYYMMDD nightly date stamp to get a monotonically increasing version component. The new version format is "major.minor.patch.(tweak|date)". Releases use a tweak level in the half-open range [0,20000000), which is smaller than any current or future date. For tweak=0 we do not show the tweak component, leaving the format "major.minor.patch" for most releases. Development versions use date=CCYYMMDD for the tweak level. The major.minor.patch part of development versions on "master" always matches the most recent release. For example, a first-parent traversal of "master" might see v2.8.1 2.8.1.20100422 v2.8.2 | | | ----o----o----o----o----o----o----o----o---- Since the date appears in the tweak component, the next release can increment the patch level (or any more significant component) to be greater than any version leading to it. Topic branches not ready for release are published only on "next" so we know that all versions on master lead between two releases.
2010-04-23 17:44:23 +04:00
"See variables CMAKE_MAJOR_VERSION, CMAKE_MINOR_VERSION, "
"CMAKE_PATCH_VERSION, and CMAKE_TWEAK_VERSION "
"for individual version components. "
"The [-id] component appears in non-release versions "
"and may be arbitrary text.", false,
"Variables that Provide Information");
cm->DefineProperty
("CMAKE_PARENT_LIST_FILE", cmProperty::VARIABLE,
"Full path to the parent listfile of the one currently being processed.",
"As CMake processes the listfiles in your project this "
"variable will always be set to the listfile that included "
"or somehow invoked the one currently being "
"processed. See also CMAKE_CURRENT_LIST_FILE.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_PROJECT_NAME", cmProperty::VARIABLE,
"The name of the current project.",
"This specifies name of the current project from"
" the closest inherited PROJECT command.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_RANLIB", cmProperty::VARIABLE,
"Name of randomizing tool for static libraries.",
"This specifies name of the program that randomizes "
"libraries on UNIX, not used on Windows, but may be present.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_ROOT", cmProperty::VARIABLE,
"Install directory for running cmake.",
"This is the install root for the running CMake and"
" the Modules directory can be found here. This is"
" commonly used in this format: ${CMAKE_ROOT}/Modules",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_SIZEOF_VOID_P", cmProperty::VARIABLE,
"Size of a void pointer.",
"This is set to the size of a pointer on the machine, "
"and is determined by a try compile. If a 64 bit size "
"is found, then the library search path is modified to "
"look for 64 bit libraries first.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_SKIP_RPATH", cmProperty::VARIABLE,
"If true, do not add run time path information.",
"If this is set to TRUE, then the rpath information "
2009-04-19 20:48:30 +04:00
"is not added to compiled executables. The default "
2007-10-18 17:10:42 +04:00
"is to add rpath information if the platform supports it."
"This allows for easy running from the build tree.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_SOURCE_DIR", cmProperty::VARIABLE,
"Source directory for project.",
"This is the top level source directory for the project. "
"It corresponds to the source directory given to "
"cmake-gui or ccmake.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_STANDARD_LIBRARIES", cmProperty::VARIABLE,
"Libraries linked into every executable and shared library.",
"This is the list of libraries that are linked "
"into all executables and libraries.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_USING_VC_FREE_TOOLS", cmProperty::VARIABLE,
"True if free visual studio tools being used.",
"This is set to true if the compiler is Visual "
"Studio free tools.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_VERBOSE_MAKEFILE", cmProperty::VARIABLE,
"Create verbose makefiles if on.",
"This variable defaults to false. You can set "
"this variable to true to make CMake produce verbose "
"makefiles that show each command line as it is used.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("PROJECT_BINARY_DIR", cmProperty::VARIABLE,
"Full path to build directory for project.",
"This is the binary directory of the most recent "
"PROJECT command.",false,"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("PROJECT_NAME", cmProperty::VARIABLE,
"Name of the project given to the project command.",
"This is the name given to the most "
"recent PROJECT command. ",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("PROJECT_SOURCE_DIR", cmProperty::VARIABLE,
"Top level source directory for the current project.",
"This is the source directory of the most recent "
"PROJECT command.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("[Project name]_BINARY_DIR", cmProperty::VARIABLE,
"Top level binary directory for the named project.",
"A variable is created with the name used in the PROJECT "
"command, and is the binary directory for the project. "
" This can be useful when SUBDIR is used to connect "
"several projects.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("[Project name]_SOURCE_DIR", cmProperty::VARIABLE,
"Top level source directory for the named project.",
"A variable is created with the name used in the PROJECT "
"command, and is the source directory for the project."
" This can be useful when add_subdirectory "
"is used to connect several projects.",false,
"Variables that Provide Information");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_IMPORT_LIBRARY_PREFIX", cmProperty::VARIABLE,
"The prefix for import libraries that you link to.",
"The prefix to use for the name of an import library if used "
"on this platform."
"\n"
"CMAKE_IMPORT_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_IMPORT_LIBRARY_SUFFIX", cmProperty::VARIABLE,
"The suffix for import libraries that you link to.",
"The suffix to use for the end of an import library if used "
"on this platform."
"\n"
"CMAKE_IMPORT_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_SHARED_LIBRARY_PREFIX", cmProperty::VARIABLE,
"The prefix for shared libraries that you link to.",
"The prefix to use for the name of a shared library, lib on UNIX."
"\n"
"CMAKE_SHARED_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_SHARED_LIBRARY_SUFFIX", cmProperty::VARIABLE,
"The suffix for shared libraries that you link to.",
"The suffix to use for the end of a shared library, .dll on Windows."
"\n"
"CMAKE_SHARED_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_SHARED_MODULE_PREFIX", cmProperty::VARIABLE,
"The prefix for loadable modules that you link to.",
"The prefix to use for the name of a loadable module on this platform."
"\n"
"CMAKE_SHARED_MODULE_PREFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_SHARED_MODULE_SUFFIX", cmProperty::VARIABLE,
"The suffix for shared libraries that you link to.",
"The suffix to use for the end of a loadable module on this platform"
"\n"
"CMAKE_SHARED_MODULE_SUFFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_STATIC_LIBRARY_PREFIX", cmProperty::VARIABLE,
"The prefix for static libraries that you link to.",
"The prefix to use for the name of a static library, lib on UNIX."
"\n"
"CMAKE_STATIC_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_STATIC_LIBRARY_SUFFIX", cmProperty::VARIABLE,
"The suffix for static libraries that you link to.",
"The suffix to use for the end of a static library, .lib on Windows."
"\n"
"CMAKE_STATIC_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>."
,false, "Variables that Provide Information");
cm->DefineProperty
("CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES", cmProperty::VARIABLE,
"Additional suffixes for shared libraries.",
"Extensions for shared libraries other than that specified by "
"CMAKE_SHARED_LIBRARY_SUFFIX, if any. "
"CMake uses this to recognize external shared library files during "
"analysis of libraries linked by a target.",
false,
"Variables that Provide Information");
2010-09-28 23:44:22 +04:00
// Variables defined by cmake, that change the behavior
2007-10-18 17:10:42 +04:00
// of cmake
cm->DefineProperty
("CMAKE_POLICY_DEFAULT_CMP<NNNN>", cmProperty::VARIABLE,
"Default for CMake Policy CMP<NNNN> when it is otherwise left unset.",
"Commands cmake_minimum_required(VERSION) and cmake_policy(VERSION) "
"by default leave policies introduced after the given version unset. "
"Set CMAKE_POLICY_DEFAULT_CMP<NNNN> to OLD or NEW to specify the "
"default for policy CMP<NNNN>, where <NNNN> is the policy number."
"\n"
"This variable should not be set by a project in CMake code; "
"use cmake_policy(SET) instead. "
"Users running CMake may set this variable in the cache "
"(e.g. -DCMAKE_POLICY_DEFAULT_CMP<NNNN>=<OLD|NEW>) "
"to set a policy not otherwise set by the project. "
"Set to OLD to quiet a policy warning while using old behavior "
"or to NEW to try building the project with new behavior.",
false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_FIND_LIBRARY_PREFIXES", cmProperty::VARIABLE,
"Prefixes to prepend when looking for libraries.",
"This specifies what prefixes to add to library names when "
"the find_library command looks for libraries. On UNIX "
"systems this is typically lib, meaning that when trying "
"to find the foo library it will look for libfoo.",
false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_FIND_LIBRARY_SUFFIXES", cmProperty::VARIABLE,
"Suffixes to append when looking for libraries.",
"This specifies what suffixes to add to library names when "
"the find_library command looks for libraries. On Windows "
"systems this is typically .lib and .dll, meaning that when trying "
"to find the foo library it will look for foo.dll etc.",
false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_CONFIGURATION_TYPES", cmProperty::VARIABLE,
"Specifies the available build types.",
"This specifies what build types will be available such as "
"Debug, Release, RelWithDebInfo etc. This has reasonable defaults "
"on most platforms. But can be extended to provide other "
"build types. See also CMAKE_BUILD_TYPE.",
false,
"Variables That Change Behavior");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_BUILD_TYPE", cmProperty::VARIABLE,
"Specifies the build type for make based generators.",
"This specifies what build type will be built in this tree. "
" Possible values are empty, Debug, Release, RelWithDebInfo"
" and MinSizeRel. This variable is only supported for "
"make based generators. If this variable is supported, "
"then CMake will also provide initial values for the "
"variables with the name "
" CMAKE_C_FLAGS_[DEBUG|RELEASE|RELWITHDEBINFO|MINSIZEREL]."
2007-10-18 17:10:42 +04:00
" For example, if CMAKE_BUILD_TYPE is Debug, then "
"CMAKE_C_FLAGS_DEBUG will be added to the CMAKE_C_FLAGS.",false,
"Variables That Change Behavior");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_BACKWARDS_COMPATIBILITY", cmProperty::VARIABLE,
"Version of cmake required to build project",
"From the point of view of backwards compatibility, this "
"specifies what version of CMake should be supported. By "
"default this value is the version number of CMake that "
"you are running. You can set this to an older version of"
" CMake to support deprecated commands of CMake in projects"
" that were written to use older versions of CMake. This "
"can be set by the user or set at the beginning of a "
"CMakeLists file.",false,
"Variables That Change Behavior");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_INSTALL_PREFIX", cmProperty::VARIABLE,
"Install directory used by install.",
"If \"make install\" is invoked or INSTALL is built"
", this directory is pre-pended onto all install "
"directories. This variable defaults to /usr/local"
" on UNIX and c:/Program Files on Windows.",false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_SKIP_INSTALL_ALL_DEPENDENCY", cmProperty::VARIABLE,
"Don't make the install target depend on the all target.",
"By default, the \"install\" target depends on the \"all\" target. "
"This has the effect, that when \"make install\" is invoked or INSTALL "
"is built, first the \"all\" target is built, then the installation "
"starts. "
"If CMAKE_SKIP_INSTALL_ALL_DEPENDENCY is set to TRUE, this dependency "
"is not created, so the installation process will start immediately, "
"independent from whether the project has been completely built or not."
,false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_MODULE_PATH", cmProperty::VARIABLE,
"List of directories to search for CMake modules.",
"Commands like include() and find_package() search for files in "
"directories listed by this variable before checking the default "
"modules that come with CMake.",
false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_PREFIX_PATH", cmProperty::VARIABLE,
"Path used for searching by FIND_XXX(), with appropriate suffixes added.",
"Specifies a path which will be used by the FIND_XXX() commands. It "
"contains the \"base\" directories, the FIND_XXX() commands append "
"appropriate subdirectories to the base directories. So FIND_PROGRAM() "
"adds /bin to each of the directories in the path, FIND_LIBRARY() "
"appends /lib to each of the directories, and FIND_PATH() and "
"FIND_FILE() append /include . By default it is empty, it is intended "
"to be set by the project. See also CMAKE_SYSTEM_PREFIX_PATH, "
"CMAKE_INCLUDE_PATH, CMAKE_LIBRARY_PATH, CMAKE_PROGRAM_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_INCLUDE_PATH", cmProperty::VARIABLE,
"Path used for searching by FIND_FILE() and FIND_PATH().",
"Specifies a path which will be used both by FIND_FILE() and "
"FIND_PATH(). Both commands will check each of the contained directories "
"for the existence of the file which is currently searched. By default "
"it is empty, it is intended to be set by the project. See also "
"CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_PREFIX_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_LIBRARY_PATH", cmProperty::VARIABLE,
"Path used for searching by FIND_LIBRARY().",
"Specifies a path which will be used by FIND_LIBRARY(). FIND_LIBRARY() "
"will check each of the contained directories for the existence of the "
"library which is currently searched. By default it is empty, it is "
"intended to be set by the project. See also CMAKE_SYSTEM_LIBRARY_PATH, "
"CMAKE_PREFIX_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_PROGRAM_PATH", cmProperty::VARIABLE,
"Path used for searching by FIND_PROGRAM().",
"Specifies a path which will be used by FIND_PROGRAM(). FIND_PROGRAM() "
"will check each of the contained directories for the existence of the "
"program which is currently searched. By default it is empty, it is "
"intended to be set by the project. See also CMAKE_SYSTEM_PROGRAM_PATH, "
" CMAKE_PREFIX_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_SYSTEM_PREFIX_PATH", cmProperty::VARIABLE,
"Path used for searching by FIND_XXX(), with appropriate suffixes added.",
"Specifies a path which will be used by the FIND_XXX() commands. It "
"contains the \"base\" directories, the FIND_XXX() commands append "
"appropriate subdirectories to the base directories. So FIND_PROGRAM() "
"adds /bin to each of the directories in the path, FIND_LIBRARY() "
"appends /lib to each of the directories, and FIND_PATH() and "
"FIND_FILE() append /include . By default this contains the standard "
"directories for the current system. It is NOT intended "
"to be modified by the project, use CMAKE_PREFIX_PATH for this. See also "
"CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_SYSTEM_LIBRARY_PATH, "
"CMAKE_SYSTEM_PROGRAM_PATH, and CMAKE_SYSTEM_IGNORE_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_SYSTEM_IGNORE_PATH", cmProperty::VARIABLE,
"Path to be ignored by FIND_XXX() commands.",
"Specifies directories to be ignored by searches in FIND_XXX() commands "
"This is useful in cross-compiled environments where some system "
"directories contain incompatible but possibly linkable libraries. For "
"example, on cross-compiled cluster environments, this allows a user to "
"ignore directories containing libraries meant for the front-end "
"machine that modules like FindX11 (and others) would normally search. "
"By default this contains a list of directories containing incompatible "
"binaries for the host system. "
"See also CMAKE_SYSTEM_PREFIX_PATH, CMAKE_SYSTEM_LIBRARY_PATH, "
"CMAKE_SYSTEM_INCLUDE_PATH, and CMAKE_SYSTEM_PROGRAM_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_IGNORE_PATH", cmProperty::VARIABLE,
"Path to be ignored by FIND_XXX() commands.",
"Specifies directories to be ignored by searches in FIND_XXX() commands "
"This is useful in cross-compiled environments where some system "
"directories contain incompatible but possibly linkable libraries. For "
"example, on cross-compiled cluster environments, this allows a user to "
"ignore directories containing libraries meant for the front-end "
"machine that modules like FindX11 (and others) would normally search. "
"By default this is empty; it is intended to be set by the project. "
"Note that CMAKE_IGNORE_PATH takes a list of directory names, NOT a "
"list of prefixes. If you want to ignore paths under prefixes (bin, "
"include, lib, etc.), you'll need to specify them explicitly. "
"See also CMAKE_PREFIX_PATH, CMAKE_LIBRARY_PATH, CMAKE_INCLUDE_PATH, "
"CMAKE_PROGRAM_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_SYSTEM_INCLUDE_PATH", cmProperty::VARIABLE,
"Path used for searching by FIND_FILE() and FIND_PATH().",
"Specifies a path which will be used both by FIND_FILE() and "
"FIND_PATH(). Both commands will check each of the contained directories "
"for the existence of the file which is currently searched. By default "
"it contains the standard directories for the current system. It is "
"NOT intended to be modified by the project, use CMAKE_INCLUDE_PATH "
"for this. See also CMAKE_SYSTEM_PREFIX_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_SYSTEM_LIBRARY_PATH", cmProperty::VARIABLE,
"Path used for searching by FIND_LIBRARY().",
"Specifies a path which will be used by FIND_LIBRARY(). FIND_LIBRARY() "
"will check each of the contained directories for the existence of the "
"library which is currently searched. By default it contains the "
"standard directories for the current system. It is NOT intended to be "
"modified by the project, use CMAKE_LIBRARY_PATH for this. See "
"also CMAKE_SYSTEM_PREFIX_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_SYSTEM_PROGRAM_PATH", cmProperty::VARIABLE,
"Path used for searching by FIND_PROGRAM().",
"Specifies a path which will be used by FIND_PROGRAM(). FIND_PROGRAM() "
"will check each of the contained directories for the existence of the "
"program which is currently searched. By default it contains the "
"standard directories for the current system. It is NOT intended to be "
"modified by the project, use CMAKE_PROGRAM_PATH for this. See also "
"CMAKE_SYSTEM_PREFIX_PATH.", false,
"Variables That Change Behavior");
cm->DefineProperty
("CMAKE_DISABLE_FIND_PACKAGE_<PackageName>", cmProperty::VARIABLE,
"Variable for disabling find_package() calls.",
"Every non-REQUIRED find_package() call in a project can be disabled "
"by setting the variable CMAKE_DISABLE_FIND_PACKAGE_<PackageName> to "
"TRUE. This can be used to build a project without an optional package, "
"although that package is installed.\n"
"This switch should be used during the initial CMake run. Otherwise if "
"the package has already been found in a previous CMake run, the "
"variables which have been stored in the cache will still be there. "
"In the case it is recommended to remove the cache variables for "
"this package from the cache using the cache editor or cmake -U", false,
"Variables That Change Behavior");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_USER_MAKE_RULES_OVERRIDE", cmProperty::VARIABLE,
"Specify a CMake file that overrides platform information.",
"CMake loads the specified file while enabling support for each "
"language from either the project() or enable_language() commands. "
"It is loaded after CMake's builtin compiler and platform information "
"modules have been loaded but before the information is used. "
"The file may set platform information variables to override CMake's "
"defaults."
"\n"
"This feature is intended for use only in overriding information "
"variables that must be set before CMake builds its first test "
"project to check that the compiler for a language works. "
"It should not be used to load a file in cases that a normal include() "
"will work. "
"Use it only as a last resort for behavior that cannot be achieved "
"any other way. "
"For example, one may set CMAKE_C_FLAGS_INIT to change the default "
"value used to initialize CMAKE_C_FLAGS before it is cached. "
"The override file should NOT be used to set anything that could "
"be set after languages are enabled, such as variables like "
"CMAKE_RUNTIME_OUTPUT_DIRECTORY that affect the placement of binaries. "
"Information set in the file will be used for try_compile and try_run "
"builds too."
,false,
"Variables That Change Behavior");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("BUILD_SHARED_LIBS", cmProperty::VARIABLE,
"Global flag to cause add_library to create shared libraries if on.",
"If present and true, this will cause all libraries to be "
"built shared unless the library was explicitly added as a "
"static library. This variable is often added to projects "
"as an OPTION so that each user of a project can decide if "
"they want to build the project using shared or static "
"libraries.",false,
"Variables That Change Behavior");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_NOT_USING_CONFIG_FLAGS", cmProperty::VARIABLE,
"Skip _BUILD_TYPE flags if true.",
"This is an internal flag used by the generators in "
"CMake to tell CMake to skip the _BUILD_TYPE flags.",false,
"Variables That Change Behavior");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_MFC_FLAG", cmProperty::VARIABLE,
"Tell cmake to use MFC for an executable or dll.",
"This can be set in a CMakeLists.txt file and will "
"enable MFC in the application. It should be set "
"to 1 for static the static MFC library, and 2 for "
"the shared MFC library. This is used in visual "
"studio 6 and 7 project files. The CMakeSetup "
"dialog used MFC and the CMakeLists.txt looks like this:\n"
2009-09-03 23:29:29 +04:00
"add_definitions(-D_AFXDLL)\n"
2007-10-18 17:10:42 +04:00
"set(CMAKE_MFC_FLAG 2)\n"
"add_executable(CMakeSetup WIN32 ${SRCS})\n",false,
"Variables That Change Behavior");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_COLOR_MAKEFILE", cmProperty::VARIABLE,
"Enables color output when using the Makefile generator.",
"When enabled, the generated Makefiles will produce colored output. "
"Default is ON.",false,
"Variables That Change Behavior");
2007-10-18 17:10:42 +04:00
// Variables defined by CMake that describe the system
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_SYSTEM", cmProperty::VARIABLE,
"Name of system cmake is compiling for.",
2009-04-19 20:48:30 +04:00
"This variable is the composite of CMAKE_SYSTEM_NAME "
2007-10-18 17:10:42 +04:00
"and CMAKE_SYSTEM_VERSION, like this "
"${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}. "
"If CMAKE_SYSTEM_VERSION is not set, then "
"CMAKE_SYSTEM is the same as CMAKE_SYSTEM_NAME.",false,
"Variables That Describe the System");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_SYSTEM_NAME", cmProperty::VARIABLE,
"Name of the OS CMake is building for.",
2007-10-18 17:10:42 +04:00
"This is the name of the operating system on "
"which CMake is targeting. On systems that "
2007-10-18 17:10:42 +04:00
"have the uname command, this variable is set "
"to the output of uname -s. Linux, Windows, "
" and Darwin for Mac OSX are the values found "
" on the big three operating systems." ,false,
"Variables That Describe the System");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_SYSTEM_PROCESSOR", cmProperty::VARIABLE,
"The name of the CPU CMake is building for.",
2007-10-18 17:10:42 +04:00
"On systems that support uname, this variable is "
"set to the output of uname -p, on windows it is "
"set to the value of the environment variable "
"PROCESSOR_ARCHITECTURE",false,
"Variables That Describe the System");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_SYSTEM_VERSION", cmProperty::VARIABLE,
"OS version CMake is building for.",
2007-10-18 17:10:42 +04:00
"A numeric version string for the system, on "
"systems that support uname, this variable is "
"set to the output of uname -r. On other "
"systems this is set to major-minor version numbers.",false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_LIBRARY_ARCHITECTURE", cmProperty::VARIABLE,
"Target architecture library directory name, if detected.",
"This is the value of CMAKE_<lang>_LIBRARY_ARCHITECTURE as "
"detected for one of the enabled languages.",false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_LIBRARY_ARCHITECTURE_REGEX", cmProperty::VARIABLE,
"Regex matching possible target architecture library directory names.",
"This is used to detect CMAKE_<lang>_LIBRARY_ARCHITECTURE from the "
"implicit linker search path by matching the <arch> name.",false,
"Variables That Describe the System");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_HOST_SYSTEM", cmProperty::VARIABLE,
"Name of system cmake is being run on.",
"The same as CMAKE_SYSTEM but for the host system instead "
"of the target system when cross compiling.",false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_HOST_SYSTEM_NAME", cmProperty::VARIABLE,
"Name of the OS CMake is running on.",
"The same as CMAKE_SYSTEM_NAME but for the host system instead "
"of the target system when cross compiling.",false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_HOST_SYSTEM_PROCESSOR", cmProperty::VARIABLE,
"The name of the CPU CMake is running on.",
"The same as CMAKE_SYSTEM_PROCESSOR but for the host system instead "
"of the target system when cross compiling.",false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_HOST_SYSTEM_VERSION", cmProperty::VARIABLE,
"OS version CMake is running on.",
"The same as CMAKE_SYSTEM_VERSION but for the host system instead "
"of the target system when cross compiling.",false,
"Variables That Describe the System");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("APPLE", cmProperty::VARIABLE,
"True if running on Mac OSX.",
"Set to true on Mac OSX.",false,
"Variables That Describe the System");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("BORLAND", cmProperty::VARIABLE,
"True of the borland compiler is being used.",
"This is set to true if the Borland compiler is being used.",false,
"Variables That Describe the System");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CYGWIN", cmProperty::VARIABLE,
"True for cygwin.",
"Set to true when using CYGWIN.",false,
"Variables That Describe the System");
2010-09-28 23:44:22 +04:00
cm->DefineProperty
("MSVC", cmProperty::VARIABLE,
"True when using Microsoft Visual C",
"Set to true when the compiler is some version of Microsoft Visual C.",
false,
"Variables That Describe the System");
cm->DefineProperty
("MSVC80", cmProperty::VARIABLE,
"True when using Microsoft Visual C 8.0",
"Set to true when the compiler is version 8.0 of Microsoft Visual C.",
false,
"Variables That Describe the System");
cm->DefineProperty
("MSVC_IDE", cmProperty::VARIABLE,
"True when using the Microsoft Visual C IDE",
"Set to true when the target platform is the Microsoft Visual C IDE, "
"as opposed to the command line compiler.",
false,
"Variables That Describe the System");
cm->DefineProperty
("MSVC_VERSION", cmProperty::VARIABLE,
"The version of Microsoft Visual C/C++ being used if any.",
"Known version numbers are:\n"
" 1200 = VS 6.0\n"
" 1300 = VS 7.0\n"
" 1310 = VS 7.1\n"
" 1400 = VS 8.0\n"
" 1500 = VS 9.0\n"
" 1600 = VS 10.0\n"
"",
false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_CL_64", cmProperty::VARIABLE,
"Using the 64 bit compiler from Microsoft",
"Set to true when using the 64 bit cl compiler from Microsoft.",
false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_COMPILER_2005", cmProperty::VARIABLE,
"Using the Visual Studio 2005 compiler from Microsoft",
"Set to true when using the Visual Studio 2005 compiler "
"from Microsoft.",
false,
"Variables That Describe the System");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("UNIX", cmProperty::VARIABLE,
"True for UNIX and UNIX like operating systems.",
"Set to true when the target system is UNIX or UNIX like "
"(i.e. APPLE and CYGWIN).",false,
"Variables That Describe the System");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("WIN32", cmProperty::VARIABLE,
"True on windows systems, including win64.",
"Set to true when the target system is Windows.",false,
"Variables That Describe the System");
cm->DefineProperty
("XCODE_VERSION", cmProperty::VARIABLE,
"Version of Xcode (Xcode generator only).",
"Under the Xcode generator, this is the version of Xcode as specified in "
"\"Xcode.app/Contents/version.plist\" (such as \"3.1.2\").",false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_HOST_APPLE", cmProperty::VARIABLE,
"True for Apple OSXoperating systems.",
"Set to true when the host system is Apple OSX.",
false,
"Variables That Describe the System");
cm->DefineProperty
("CMAKE_HOST_UNIX", cmProperty::VARIABLE,
"True for UNIX and UNIX like operating systems.",
"Set to true when the host system is UNIX or UNIX like "
"(i.e. APPLE and CYGWIN).",false,
"Variables That Describe the System");
2010-09-28 23:44:22 +04:00
cm->DefineProperty
("CMAKE_HOST_WIN32", cmProperty::VARIABLE,
"True on windows systems, including win64.",
"Set to true when the host system is Windows and on cygwin.",false,
"Variables That Describe the System");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_OBJECT_PATH_MAX", cmProperty::VARIABLE,
"Maximum object file full-path length allowed by native build tools.",
"CMake computes for every source file an object file name that is "
"unique to the source file and deterministic with respect to the "
"full path to the source file. "
"This allows multiple source files in a target to share the same name "
"if they lie in different directories without rebuilding when one is "
"added or removed. "
"However, it can produce long full paths in a few cases, so CMake "
"shortens the path using a hashing scheme when the full path to an "
"object file exceeds a limit. "
"CMake has a built-in limit for each platform that is sufficient for "
"common tools, but some native tools may have a lower limit. "
"This variable may be set to specify the limit explicitly. "
"The value must be an integer no less than 128.",false,
"Variables That Describe the System");
2010-09-28 23:44:22 +04:00
// Variables that affect the building of object files and
2007-10-18 17:10:42 +04:00
// targets.
//
cm->DefineProperty
("CMAKE_INCLUDE_CURRENT_DIR", cmProperty::VARIABLE,
"Automatically add the current source- and build directories "
"to the include path.",
"If this variable is enabled, CMake automatically adds in each "
"directory ${CMAKE_CURRENT_SOURCE_DIR} and ${CMAKE_CURRENT_BINARY_DIR} "
"to the include path for this directory. These additional include "
"directories do not propagate down to subdirectories. This is useful "
"mainly for out-of-source builds, where files generated into the "
"build tree are included by files located in the source tree.\n"
"By default CMAKE_INCLUDE_CURRENT_DIR is OFF.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_INSTALL_RPATH", cmProperty::VARIABLE,
"The rpath to use for installed targets.",
"A semicolon-separated list specifying the rpath "
"to use in installed targets (for platforms that support it). "
"This is used to initialize the target property "
"INSTALL_RPATH for all targets.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_INSTALL_RPATH_USE_LINK_PATH", cmProperty::VARIABLE,
"Add paths to linker search and installed rpath.",
"CMAKE_INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true "
"will append directories in the linker search path and outside the "
"project to the INSTALL_RPATH. "
"This is used to initialize the target property "
"INSTALL_RPATH_USE_LINK_PATH for all targets.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_INSTALL_NAME_DIR", cmProperty::VARIABLE,
"Mac OSX directory name for installed targets.",
"CMAKE_INSTALL_NAME_DIR is used to initialize the "
"INSTALL_NAME_DIR property on all targets. See that target "
"property for more information.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_Fortran_MODULE_DIRECTORY", cmProperty::VARIABLE,
"Fortran module output directory.",
"This variable is used to initialize the "
"Fortran_MODULE_DIRECTORY property on all the targets. "
"See that target property for additional information.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_LIBRARY_OUTPUT_DIRECTORY", cmProperty::VARIABLE,
"Where to put all the LIBRARY targets when built.",
"This variable is used to initialize the "
"LIBRARY_OUTPUT_DIRECTORY property on all the targets. "
"See that target property for additional information.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_ARCHIVE_OUTPUT_DIRECTORY", cmProperty::VARIABLE,
"Where to put all the ARCHIVE targets when built.",
"This variable is used to initialize the "
"ARCHIVE_OUTPUT_DIRECTORY property on all the targets. "
"See that target property for additional information.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_RUNTIME_OUTPUT_DIRECTORY", cmProperty::VARIABLE,
"Where to put all the RUNTIME targets when built.",
"This variable is used to initialize the "
"RUNTIME_OUTPUT_DIRECTORY property on all the targets. "
"See that target property for additional information.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_DEBUG_POSTFIX", cmProperty::VARIABLE,
"See variable CMAKE_<CONFIG>_POSTFIX.",
"This variable is a special case of the more-general "
"CMAKE_<CONFIG>_POSTFIX variable for the DEBUG configuration.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_<CONFIG>_POSTFIX", cmProperty::VARIABLE,
"Default filename postfix for libraries under configuration <CONFIG>.",
"When a non-executable target is created its <CONFIG>_POSTFIX "
"target property is initialized with the value of this variable "
"if it is set.",
false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_BUILD_WITH_INSTALL_RPATH", cmProperty::VARIABLE,
"Use the install path for the RPATH",
"Normally CMake uses the build tree for the RPATH when building "
"executables etc on systems that use RPATH. When the software "
"is installed the executables etc are relinked by CMake to have "
"the install RPATH. If this variable is set to true then the software "
"is always built with the install path for the RPATH and does not "
"need to be relinked when installed.",false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_NO_BUILTIN_CHRPATH", cmProperty::VARIABLE,
"Do not use the builtin ELF editor to fix RPATHs on installation.",
"When an ELF binary needs to have a different RPATH after installation "
"than it does in the build tree, CMake uses a builtin editor to change "
"the RPATH in the installed copy. "
"If this variable is set to true then CMake will relink the binary "
"before installation instead of using its builtin editor.",false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_SKIP_BUILD_RPATH", cmProperty::VARIABLE,
"Do not include RPATHs in the build tree.",
"Normally CMake uses the build tree for the RPATH when building "
"executables etc on systems that use RPATH. When the software "
"is installed the executables etc are relinked by CMake to have "
"the install RPATH. If this variable is set to true then the software "
"is always built with no RPATH.",false,
"Variables that Control the Build");
cm->DefineProperty
2007-10-18 17:10:42 +04:00
("CMAKE_EXE_LINKER_FLAGS", cmProperty::VARIABLE,
"Linker flags used to create executables.",
"Flags used by the linker when creating an executable.",false,
"Variables that Control the Build");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_EXE_LINKER_FLAGS_[CMAKE_BUILD_TYPE]", cmProperty::VARIABLE,
"Flag used when linking an executable.",
"Same as CMAKE_C_FLAGS_* but used by the linker "
"when creating executables.",false,
"Variables that Control the Build");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_LIBRARY_PATH_FLAG", cmProperty::VARIABLE,
"The flag used to add a library search path to a compiler.",
"The flag used to specify a library directory to the compiler. "
"On most compilers this is \"-L\".",false,
"Variables that Control the Build");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_LINK_DEF_FILE_FLAG ", cmProperty::VARIABLE,
"Linker flag used to specify a .def file for dll creation.",
"The flag used to add a .def file when creating "
"a dll on Windows, this is only defined on Windows.",false,
"Variables that Control the Build");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_LINK_LIBRARY_FLAG", cmProperty::VARIABLE,
"Flag used to link a library into an executable.",
"The flag used to specify a library to link to an executable. "
"On most compilers this is \"-l\".",false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_LINK_LIBRARY_FILE_FLAG", cmProperty::VARIABLE,
"Flag used to link a library specified by a path to its file.",
"The flag used before a library file path is given to the linker. "
"This is needed only on very few platforms.", false,
"Variables that Control the Build");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_USE_RELATIVE_PATHS", cmProperty::VARIABLE,
"Use relative paths (May not work!).",
"If this is set to TRUE, then the CMake will use "
"relative paths between the source and binary tree. "
"This option does not work for more complicated "
"projects, and relative paths are used when possible. "
"In general, it is not possible to move CMake generated"
" makefiles to a different location regardless "
"of the value of this variable.",false,
"Variables that Control the Build");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("EXECUTABLE_OUTPUT_PATH", cmProperty::VARIABLE,
"Old executable location variable.",
"The target property RUNTIME_OUTPUT_DIRECTORY supercedes "
"this variable for a target if it is set. "
"Executable targets are otherwise placed in this directory.",false,
"Variables that Control the Build");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("LIBRARY_OUTPUT_PATH", cmProperty::VARIABLE,
"Old library location variable.",
"The target properties ARCHIVE_OUTPUT_DIRECTORY, "
"LIBRARY_OUTPUT_DIRECTORY, and RUNTIME_OUTPUT_DIRECTORY supercede "
"this variable for a target if they are set. "
"Library targets are otherwise placed in this directory.",false,
"Variables that Control the Build");
cm->DefineProperty
("CMAKE_TRY_COMPILE_CONFIGURATION", cmProperty::VARIABLE,
"Build configuration used for try_compile and try_run projects.",
"Projects built by try_compile and try_run are built "
"synchronously during the CMake configuration step. "
"Therefore a specific build configuration must be chosen even "
"if the generated build system supports multiple configurations.",false,
"Variables that Control the Build");
2007-10-18 17:10:42 +04:00
2007-10-18 17:10:42 +04:00
// Variables defined when the a language is enabled These variables will
// also be defined whenever CMake has loaded its support for compiling (LANG)
// programs. This support will be loaded whenever CMake is used to compile
// (LANG) files. C and CXX are examples of the most common values for (LANG).
cm->DefineProperty
("CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG>", cmProperty::VARIABLE,
"Specify a CMake file that overrides platform information for <LANG>.",
"This is a language-specific version of "
"CMAKE_USER_MAKE_RULES_OVERRIDE loaded only when enabling "
"language <LANG>.",false,
2007-10-31 20:57:51 +03:00
"Variables for Languages");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_COMPILER", cmProperty::VARIABLE,
"The full path to the compiler for LANG.",
"This is the command that will be used as the <LANG> compiler. "
"Once set, you can not change this variable.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
cm->DefineProperty
("CMAKE_<LANG>_COMPILER_ID", cmProperty::VARIABLE,
"An internal variable subject to change.",
"This is used in determining the compiler and is subject to change.",
false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_PLATFORM_ID", cmProperty::VARIABLE,
"An internal variable subject to change.",
"This is used in determining the platform and is subject to change.",
false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_COMPILER_ABI", cmProperty::VARIABLE,
"An internal variable subject to change.",
"This is used in determining the compiler ABI and is subject to change.",
false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_INTERNAL_PLATFORM_ABI", cmProperty::VARIABLE,
"An internal variable subject to change.",
"This is used in determining the compiler ABI and is subject to change.",
false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_SIZEOF_DATA_PTR", cmProperty::VARIABLE,
"Size of pointer-to-data types for language <LANG>.",
"This holds the size (in bytes) of pointer-to-data types in the target "
"platform ABI. "
"It is defined for languages C and CXX (C++).",
false,
"Variables for Languages");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_COMPILER_IS_GNU<LANG>", cmProperty::VARIABLE,
"True if the compiler is GNU.",
"If the selected <LANG> compiler is the GNU "
"compiler then this is TRUE, if not it is FALSE.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_FLAGS_DEBUG", cmProperty::VARIABLE,
"Flags for Debug build type or configuration.",
"<LANG> flags used when CMAKE_BUILD_TYPE is Debug.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_FLAGS_MINSIZEREL", cmProperty::VARIABLE,
"Flags for MinSizeRel build type or configuration.",
"<LANG> flags used when CMAKE_BUILD_TYPE is MinSizeRel."
"Short for minimum size release.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_FLAGS_RELEASE", cmProperty::VARIABLE,
"Flags for Release build type or configuration.",
"<LANG> flags used when CMAKE_BUILD_TYPE is Release",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_FLAGS_RELWITHDEBINFO", cmProperty::VARIABLE,
"Flags for RelWithDebInfo type or configuration.",
"<LANG> flags used when CMAKE_BUILD_TYPE is RelWithDebInfo. "
"Short for Release With Debug Information.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_COMPILE_OBJECT", cmProperty::VARIABLE,
"Rule variable to compile a single object file.",
"This is a rule variable that tells CMake how to "
"compile a single object file for for the language <LANG>.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_CREATE_SHARED_LIBRARY", cmProperty::VARIABLE,
"Rule variable to create a shared library.",
"This is a rule variable that tells CMake how to "
"create a shared library for the language <LANG>.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_CREATE_SHARED_MODULE", cmProperty::VARIABLE,
"Rule variable to create a shared module.",
"This is a rule variable that tells CMake how to "
"create a shared library for the language <LANG>.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_CREATE_STATIC_LIBRARY", cmProperty::VARIABLE,
"Rule variable to create a static library.",
"This is a rule variable that tells CMake how "
2007-10-23 18:08:26 +04:00
"to create a static library for the language <LANG>.",false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_ARCHIVE_CREATE", cmProperty::VARIABLE,
"Rule variable to create a new static archive.",
"This is a rule variable that tells CMake how to create a static "
"archive. It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY "
"on some platforms in order to support large object counts. "
"See also CMAKE_<LANG>_ARCHIVE_APPEND and CMAKE_<LANG>_ARCHIVE_FINISH.",
false, "Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_ARCHIVE_APPEND", cmProperty::VARIABLE,
"Rule variable to append to a static archive.",
"This is a rule variable that tells CMake how to append to a static "
"archive. It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY "
"on some platforms in order to support large object counts. "
"See also CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_FINISH.",
false, "Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_ARCHIVE_FINISH", cmProperty::VARIABLE,
"Rule variable to finish an existing static archive.",
"This is a rule variable that tells CMake how to finish a static "
"archive. It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY "
"on some platforms in order to support large object counts. "
"See also CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_APPEND.",
false, "Variables for Languages");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_IGNORE_EXTENSIONS", cmProperty::VARIABLE,
"File extensions that should be ignored by the build.",
"This is a list of file extensions that may be "
2007-10-23 18:08:26 +04:00
"part of a project for a given language but are not compiled. ",false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES", cmProperty::VARIABLE,
"Directories implicitly searched by the compiler for header files.",
"CMake does not explicitly specify these directories on compiler "
"command lines for language <LANG>. "
"This prevents system include directories from being treated as user "
"include directories on some compilers.", false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES", cmProperty::VARIABLE,
"Implicit linker search path detected for language <LANG>.",
"Compilers typically pass directories containing language runtime "
"libraries and default library search paths when they invoke a linker. "
"These paths are implicit linker search directories for the compiler's "
"language. "
"CMake automatically detects these directories for each language and "
"reports the results in this variable.", false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES", cmProperty::VARIABLE,
"Implicit link libraries and flags detected for language <LANG>.",
"Compilers typically pass language runtime library names and "
"other flags when they invoke a linker. "
"These flags are implicit link options for the compiler's language. "
"CMake automatically detects these libraries and flags for each "
"language and reports the results in this variable.", false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_LIBRARY_ARCHITECTURE", cmProperty::VARIABLE,
"Target architecture library directory name detected for <lang>.",
"If the <lang> compiler passes to the linker an architecture-specific "
"system library search directory such as <prefix>/lib/<arch> this "
"variable contains the <arch> name if/as detected by CMake.",false,
"Variables for Languages");
cm->DefineProperty
("CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES", cmProperty::VARIABLE,
"True if CMAKE_<LANG>_LINKER_PREFERENCE propagates across targets.",
"This is used when CMake selects a linker language for a target. "
"Languages compiled directly into the target are always considered. "
"A language compiled into static libraries linked by the target is "
"considered if this variable is true.", false,
"Variables for Languages");
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_LINKER_PREFERENCE", cmProperty::VARIABLE,
"Preference value for linker language selection.",
"The \"linker language\" for executable, shared library, and module "
"targets is the language whose compiler will invoke the linker. "
"The LINKER_LANGUAGE target property sets the language explicitly. "
"Otherwise, the linker language is that whose linker preference value "
"is highest among languages compiled and linked into the target. "
"See also the CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES variable.",
false,
2007-10-23 18:08:26 +04:00
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_LINK_EXECUTABLE ", cmProperty::VARIABLE,
"Rule variable to link and executable.",
2007-10-23 18:08:26 +04:00
"Rule variable to link and executable for the given language.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_OUTPUT_EXTENSION", cmProperty::VARIABLE,
"Extension for the output of a compile for a single file.",
"This is the extension for an object file for "
2007-10-23 18:08:26 +04:00
"the given <LANG>. For example .obj for C on Windows.",false,
"Variables for Languages");
2010-09-28 23:44:22 +04:00
2007-10-18 17:10:42 +04:00
cm->DefineProperty
("CMAKE_<LANG>_SOURCE_FILE_EXTENSIONS", cmProperty::VARIABLE,
"Extensions of source files for the given language.",
"This is the list of extensions for a "
"given languages source files.",false,"Variables for Languages");
cm->DefineProperty(
"CMAKE_<LANG>_COMPILER_LOADED", cmProperty::VARIABLE,
"Defined to true if the language is enabled.",
"When language <LANG> is enabled by project() or enable_language() "
"this variable is defined to 1.",
false,"Variables for Languages");
cm->DefineProperty(
"CMAKE_Fortran_MODDIR_FLAG", cmProperty::VARIABLE,
"Fortran flag for module output directory.",
"This stores the flag needed to pass the value of the "
"Fortran_MODULE_DIRECTORY target property to the compiler.",
false,"Variables for Languages");
cm->DefineProperty(
"CMAKE_Fortran_MODDIR_DEFAULT", cmProperty::VARIABLE,
"Fortran default module output directory.",
"Most Fortran compilers write .mod files to the current working "
"directory. "
"For those that do not, this is set to \".\" and used when the "
"Fortran_MODULE_DIRECTORY target property is not set.",
false,"Variables for Languages");
cm->DefineProperty(
"CMAKE_Fortran_MODOUT_FLAG", cmProperty::VARIABLE,
"Fortran flag to enable module output.",
"Most Fortran compilers write .mod files out by default. "
"For others, this stores the flag needed to enable module output.",
false,"Variables for Languages");
// variables that are used by cmake but not to be documented
2010-09-28 23:44:22 +04:00
cm->DefineProperty("CMAKE_MATCH_0", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_1", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_2", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_3", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_4", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_5", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_6", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_7", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_8", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MATCH_9", cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_COMPILER_ARG1",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_COMPILER_ENV_VAR",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_COMPILER_ID_RUN",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_CREATE_ASSEMBLY_SOURCE",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_CREATE_PREPROCESSED_SOURCE",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_FLAGS_DEBUG_INIT",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_FLAGS_INIT",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_FLAGS_MINSIZEREL_INIT",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_FLAGS_RELEASE_INIT",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_FLAGS_RELWITHDEBINFO_INIT",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_INFORMATION_LOADED",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_LINK_EXECUTABLE",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_LINK_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_RESPONSE_FILE_LINK_FLAG",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_STANDARD_LIBRARIES",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_STANDARD_LIBRARIES_INIT",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_USE_RESPONSE_FILE_FOR_INCLUDES",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_<LANG>_USE_RESPONSE_FILE_FOR_OBJECTS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_EXECUTABLE_SUFFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_EXE_LINK_DYNAMIC_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_EXE_LINK_STATIC_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_GENERATOR_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_IMPORT_LIBRARY_PREFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_IMPORT_LIBRARY_SUFFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_INCLUDE_FLAG_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_INCLUDE_FLAG_SEP_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_INCLUDE_SYSTEM_FLAG_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_NEEDS_REQUIRES_STEP_<LANG>_FLAG",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_CREATE_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_LINK_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_LINK_DYNAMIC_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_LINK_STATIC_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_PREFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_SUFFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_RUNTIME_<LANG>_FLAG",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_RUNTIME_<LANG>_FLAG_SEP",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_LIBRARY_RPATH_LINK_<LANG>_FLAG",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_EXECUTABLE_RUNTIME_<LANG>_FLAG",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_EXECUTABLE_RUNTIME_<LANG>_FLAG_SEP",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_EXECUTABLE_RPATH_LINK_<LANG>_FLAG",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_MODULE_CREATE_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_MODULE_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_MODULE_LINK_DYNAMIC_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_MODULE_LINK_STATIC_<LANG>_FLAGS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_MODULE_PREFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_SHARED_MODULE_SUFFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_STATIC_LIBRARY_PREFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_STATIC_LIBRARY_SUFFIX_<LANG>",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_LINK_DEPENDENT_LIBRARY_FILES",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_LINK_DEPENDENT_LIBRARY_DIRS",
cmProperty::VARIABLE,0,0);
cm->DefineProperty("CMAKE_MAKE_INCLUDE_FROM_ROOT",
cmProperty::VARIABLE,0,0);
2007-10-18 17:10:42 +04:00
}