kolan
/
CMake
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
CMake/Tests/CPackComponentsForAll/RunCPackVerifyResult.cmake

391 lines
19 KiB
CMake
Raw Normal View History

CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
# prevent older policies from interfearing with this script
cmake_policy(PUSH)
cmake_policy(VERSION ${CMAKE_VERSION})
CPack new tests for component install
2010-12-03 00:56:26 +03:00
message(STATUS "=============================================================================")
message(STATUS "CTEST_FULL_OUTPUT (Avoid ctest truncation of output)")
message(STATUS "")
if(NOT CPackComponentsForAll_BINARY_DIR)
message(FATAL_ERROR "CPackComponentsForAll_BINARY_DIR not set")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack new tests for component install
2010-12-03 00:56:26 +03:00
if(NOT CPackGen)
message(FATAL_ERROR "CPackGen not set")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Tests: Use the right path to CPack value for running CPack tests These tests were not running properly on Visual Studio or Xcode dashboards before this commit because of the "Debug" or "Release" sub-directory. The scripts already have CMAKE_CPACK_COMMAND since the correct CMake executable is used to run the scripts, so just use that, rather than passing down an incorrect path to the CPack executable.
2012-11-29 02:01:25 +04:00
message("CMAKE_CPACK_COMMAND = ${CMAKE_CPACK_COMMAND}")
if(NOT CMAKE_CPACK_COMMAND)
message(FATAL_ERROR "CMAKE_CPACK_COMMAND not set")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
if(NOT CPackComponentWay)
message(FATAL_ERROR "CPackComponentWay not set")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
CPack new tests for component install
2010-12-03 00:56:26 +03:00
set(expected_file_mask "")
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
# The usual default behavior is to expect a single file
CPackTest spit out more output in case of failure
2010-12-12 14:19:50 +03:00
# Then some specific generators (Archive, RPM, ...)
# May produce several numbers of files depending on
# CPACK_COMPONENT_xxx values
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
set(expected_count 1)
Change cpack run and verify script to work with multi-config generators. Use the location of the running cmake to find cpack, and use the CMAKE_CONFIG_TYPE environtment variable as a type for cpack.
2010-12-14 21:42:21 +03:00
set(config_type $ENV{CMAKE_CONFIG_TYPE})
set(config_args )
if(config_type)
set(config_args -C ${config_type})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPackRPM add more trace output in order to help failing diagnostics
2011-03-10 11:48:46 +03:00
set(config_verbose )
CPackTest spit out more output in case of failure
2010-12-12 14:19:50 +03:00
CPack new tests for component install
2010-12-03 00:56:26 +03:00
if(CPackGen MATCHES "ZIP")
set(expected_file_mask "${CPackComponentsForAll_BINARY_DIR}/MyLib-*.zip")
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
if (${CPackComponentWay} STREQUAL "default")
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "OnePackPerGroup")
CPackArchive package all components specified in CPACK_COMPONENTS_ALL When asking for group packaging the components not belonging to any group should be packaged separately.
2011-03-03 23:19:13 +03:00
set(expected_count 3)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "IgnoreGroup")
CPack Tests the different ways of packaging components
2011-01-30 15:11:25 +03:00
set(expected_count 4)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "AllInOne")
CPackRPM activate CPackRPM test on Linux systems where rpmbuild is found
2011-03-03 22:45:43 +03:00
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
endif ()
CPackRPM activate CPackRPM test on Linux systems where rpmbuild is found
2011-03-03 22:45:43 +03:00
elseif (CPackGen MATCHES "RPM")
CPackRPM add more trace output in order to help failing diagnostics
2011-03-10 11:48:46 +03:00
set(config_verbose -D "CPACK_RPM_PACKAGE_DEBUG=1")
CPackRPM activate CPackRPM test on Linux systems where rpmbuild is found
2011-03-03 22:45:43 +03:00
set(expected_file_mask "${CPackComponentsForAll_BINARY_DIR}/MyLib-*.rpm")
if (${CPackComponentWay} STREQUAL "default")
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "OnePackPerGroup")
set(expected_count 3)
elseif (${CPackComponentWay} STREQUAL "IgnoreGroup")
CPackRPM activate CPackRPM test on Linux systems where rpmbuild is found
2011-03-03 22:45:43 +03:00
set(expected_count 4)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "AllInOne")
set(expected_count 1)
endif ()
elseif (CPackGen MATCHES "DEB")
CPack/Deb test changes due to breaking changes New CPack/Deb tests and changes to old tests as package file names and inter component dependency detection was changed.
2016-05-10 16:40:48 +03:00
set(expected_file_mask "${CPackComponentsForAll_BINARY_DIR}/mylib*_1.0.2-1_*.deb")
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
if (${CPackComponentWay} STREQUAL "default")
CPack Tests the different ways of packaging components
2011-01-30 15:11:25 +03:00
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "OnePackPerGroup")
set(expected_count 3)
elseif (${CPackComponentWay} STREQUAL "IgnoreGroup")
set(expected_count 4)
elseif (${CPackComponentWay} STREQUAL "AllInOne")
CPack Tests the different ways of packaging components
2011-01-30 15:11:25 +03:00
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
endif ()
endif()
CPack new tests for component install
2010-12-03 00:56:26 +03:00
Add component support to DragNDrop generator.
2011-03-28 19:11:27 +04:00
if(CPackGen MATCHES "DragNDrop")
set(expected_file_mask "${CPackComponentsForAll_BINARY_DIR}/MyLib-*.dmg")
if (${CPackComponentWay} STREQUAL "default")
set(expected_count 1)
elseif (${CPackComponentWay} STREQUAL "OnePackPerGroup")
set(expected_count 3)
elseif (${CPackComponentWay} STREQUAL "IgnoreGroup")
set(expected_count 4)
elseif (${CPackComponentWay} STREQUAL "AllInOne")
set(expected_count 1)
endif ()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Add component support to DragNDrop generator.
2011-03-28 19:11:27 +04:00
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
# clean-up previously CPack generated files
if(expected_file_mask)
file(GLOB expected_file "${expected_file_mask}")
if (expected_file)
file(REMOVE ${expected_file})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endif()
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
CPackRPM add more trace output in order to help failing diagnostics
2011-03-10 11:48:46 +03:00
message("config_args = ${config_args}")
message("config_verbose = ${config_verbose}")
Tests: Use the right path to CPack value for running CPack tests These tests were not running properly on Visual Studio or Xcode dashboards before this commit because of the "Debug" or "Release" sub-directory. The scripts already have CMAKE_CPACK_COMMAND since the correct CMake executable is used to run the scripts, so just use that, rather than passing down an incorrect path to the CPack executable.
2012-11-29 02:01:25 +04:00
execute_process(COMMAND ${CMAKE_CPACK_COMMAND} ${config_verbose} -G ${CPackGen} ${config_args}
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
RESULT_VARIABLE CPack_result
OUTPUT_VARIABLE CPack_output
ERROR_VARIABLE CPack_error
WORKING_DIRECTORY ${CPackComponentsForAll_BINARY_DIR})
if (CPack_result)
message(FATAL_ERROR "error: CPack execution went wrong!, CPack_output=${CPack_output}, CPack_error=${CPack_error}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else ()
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
message(STATUS "CPack_output=${CPack_output}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
# Now verify if the number of expected file is OK
# - using expected_file_mask and
# - expected_count
CPack new tests for component install
2010-12-03 00:56:26 +03:00
if(expected_file_mask)
file(GLOB expected_file "${expected_file_mask}")
message(STATUS "expected_count='${expected_count}'")
message(STATUS "expected_file='${expected_file}'")
message(STATUS "expected_file_mask='${expected_file_mask}'")
if(NOT expected_file)
CPack/RPM different package names Packagers may now set their own rpm package file names or request that rpmbuild tool chooses one for them. It also supports handing of situations where one spec file may produce multiple rpm packages.
2016-05-15 04:01:34 +03:00
message(FATAL_ERROR "error: expected_file does not exist: CPackComponentsForAll test fails. (CPack_output=${CPack_output}, CPack_error=${CPack_error}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack new tests for component install
2010-12-03 00:56:26 +03:00
list(LENGTH expected_file actual_count)
message(STATUS "actual_count='${actual_count}'")
if(NOT actual_count EQUAL expected_count)
Arrange output in a better way
2010-12-13 00:35:18 +03:00
message(FATAL_ERROR "error: expected_count=${expected_count} does not match actual_count=${actual_count}: CPackComponents test fails. (CPack_output=${CPack_output}, CPack_error=${CPack_error})")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endif()
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
# Validate content
if(CPackGen MATCHES "RPM")
find_program(RPM_EXECUTABLE rpm)
if(NOT RPM_EXECUTABLE)
message(FATAL_ERROR "error: missing rpm executable required by the test")
endif()
set(CPACK_RPM_PACKAGE_SUMMARY "default summary")
CPack/RPM support for upper cased component variables CPACK_* variables expect component name in upper case. CPACK_RPM_* variables expected component name to be in same case as component name. This patch adds support for CPACK_RPM_* variables with upper case component names to match the convention with CPACK_* variables and also preserves same case component names for back compatibility.
2016-02-13 04:09:32 +03:00
set(CPACK_RPM_HEADERS_PACKAGE_SUMMARY "headers summary")
set(CPACK_RPM_HEADERS_PACKAGE_DESCRIPTION "headers description")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
set(CPACK_COMPONENT_APPLICATIONS_DESCRIPTION
"An extremely useful application that makes use of MyLib")
CPack/RPM improved component override test Component specific attributes test passed even when attribute was able to leak to the next component as library package is the last that is generated. This patch fixes the test as header package is generated in the middle so leakage causes the test to fail.
2015-03-17 00:10:18 +03:00
set(CPACK_COMPONENT_LIBRARIES_DESCRIPTION
"Static libraries used to build programs with MyLib")
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
set(LIB_SUFFIX "6?4?")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
CPackRPM: Drop explicit handling of '@' symbols that breaks them (#14782) The change in commit v2.8.12~218^2 (CPackRPM protect '@' character in filename processed in the spec file, 2013-07-05) was not necessary after commit v2.8.12~439^2 (Add support for componentized USER spec file, 2013-04-01). The latter replaced ${VAR} references in the spec file template string with \@VAR\@ references, thus protecting '@' symbols automatically. This caused CPackRPM to break paths with @ symbols. Revert the change to fix the behavior, and add a test case.
2015-01-07 22:33:27 +03:00
# test package info
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
if(${CPackComponentWay} STREQUAL "IgnoreGroup")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
# set gnu install prefixes to what they are set during rpm creation
# CMAKE_SIZEOF_VOID_P is not set here but lib is prefix of lib64 so
# relocation path test won't fail on OSes with lib64 library location
include(GNUInstallDirs)
CPackRPM: Fix handling of relocation prefix parent directories In commit 3ec02547 (CPackRPM: Allow multiple path relocation prefixes for one package, 2015-01-21) a regression was introduced that causes parent directories of relocation paths to be incorrectly included in the rpm. Fix this and make the test case more strict to cover it.
2015-02-27 02:33:48 +03:00
set(CPACK_PACKAGING_INSTALL_PREFIX "/usr/foo/bar")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
foreach(check_file ${expected_file})
string(REGEX MATCH ".*libraries.*" check_file_libraries_match ${check_file})
string(REGEX MATCH ".*headers.*" check_file_headers_match ${check_file})
string(REGEX MATCH ".*applications.*" check_file_applications_match ${check_file})
string(REGEX MATCH ".*Unspecified.*" check_file_Unspecified_match ${check_file})
execute_process(COMMAND ${RPM_EXECUTABLE} -pqi ${check_file}
OUTPUT_VARIABLE check_file_content
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
CPack/RPM architecture test fixup Fixed architecture test that was missing architecture in regular expressions - bug was detected on older rpm versions where the check failed. Extended architecture test that takes into account older versions of rpm. This patch is related to 15442.
2015-03-15 23:08:19 +03:00
execute_process(COMMAND ${RPM_EXECUTABLE} -pqa ${check_file}
RESULT_VARIABLE check_package_architecture_result
OUTPUT_VARIABLE check_package_architecture
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
CPackRPM: Fix handling of relocation prefix parent directories In commit 3ec02547 (CPackRPM: Allow multiple path relocation prefixes for one package, 2015-01-21) a regression was introduced that causes parent directories of relocation paths to be incorrectly included in the rpm. Fix this and make the test case more strict to cover it.
2015-02-27 02:33:48 +03:00
execute_process(COMMAND ${RPM_EXECUTABLE} -pql ${check_file}
OUTPUT_VARIABLE check_package_content
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
CPack/RPM relocation paths test fixup Patch fixes bug in test reported with id 15442 - older versions of rpm print out package info a bit differently so we should ignore white spaces
2015-03-15 22:37:16 +03:00
set(whitespaces "[\\t\\n\\r ]*")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
if(check_file_libraries_match)
CPack/RPM improved component override test Component specific attributes test passed even when attribute was able to leak to the next component as library package is the last that is generated. This patch fixes the test as header package is generated in the middle so leakage causes the test to fail.
2015-03-17 00:10:18 +03:00
set(check_file_match_expected_summary ".*${CPACK_RPM_PACKAGE_SUMMARY}.*")
set(check_file_match_expected_description ".*${CPACK_COMPONENT_LIBRARIES_DESCRIPTION}.*")
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
set(check_file_match_expected_relocation_path "Relocations${whitespaces}:${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}${LIB_SUFFIX}${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}/other_relocatable${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}${LIB_SUFFIX}/inside_relocatable_two/depth_two/different_relocatable")
CPack/RPM architecture test fixup Fixed architecture test that was missing architecture in regular expressions - bug was detected on older rpm versions where the check failed. Extended architecture test that takes into account older versions of rpm. This patch is related to 15442.
2015-03-15 23:08:19 +03:00
set(check_file_match_expected_architecture "") # we don't explicitly set this value so it is different on each platform - ignore it
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
set(spec_regex "*libraries*")
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
set(check_content_list "^/usr/foo/bar/lib${LIB_SUFFIX}
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two/depth_three
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two/depth_three/symlink_parentdir_path
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two/symlink_outside_package
CPack/RPM external symlink handling Symbolic links that point to external location no longer cause cmake to fail with string out of bounds error but are instead packaged as non relocatable symlinks and print out a warning message.
2016-03-31 08:48:38 +03:00
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two/symlink_outside_wdr
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two/symlink_relocatable_subpath
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two/symlink_samedir_path
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two/symlink_samedir_path_current_dir
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/depth_two/symlink_samedir_path_longer
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_one/symlink_subdir_path
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_two
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_two/depth_two
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_two/depth_two/different_relocatable
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_two/depth_two/different_relocatable/bar
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_two/depth_two/symlink_other_relocatable_path
/usr/foo/bar/lib${LIB_SUFFIX}/inside_relocatable_two/depth_two/symlink_to_non_relocatable_path
/usr/foo/bar/lib${LIB_SUFFIX}/libmylib.a
/usr/foo/bar/non_relocatable
/usr/foo/bar/non_relocatable/depth_two
/usr/foo/bar/non_relocatable/depth_two/symlink_from_non_relocatable_path
/usr/foo/bar/other_relocatable
/usr/foo/bar/other_relocatable/depth_two$")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
elseif(check_file_headers_match)
CPack/RPM support for upper cased component variables CPACK_* variables expect component name in upper case. CPACK_RPM_* variables expected component name to be in same case as component name. This patch adds support for CPACK_RPM_* variables with upper case component names to match the convention with CPACK_* variables and also preserves same case component names for back compatibility.
2016-02-13 04:09:32 +03:00
set(check_file_match_expected_summary ".*${CPACK_RPM_HEADERS_PACKAGE_SUMMARY}.*")
set(check_file_match_expected_description ".*${CPACK_RPM_HEADERS_PACKAGE_DESCRIPTION}.*")
CPack/RPM relocation paths test fixup Patch fixes bug in test reported with id 15442 - older versions of rpm print out package info a bit differently so we should ignore white spaces
2015-03-15 22:37:16 +03:00
set(check_file_match_expected_relocation_path "Relocations${whitespaces}:${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_INCLUDEDIR}")
CPack/RPM architecture test fixup Fixed architecture test that was missing architecture in regular expressions - bug was detected on older rpm versions where the check failed. Extended architecture test that takes into account older versions of rpm. This patch is related to 15442.
2015-03-15 23:08:19 +03:00
set(check_file_match_expected_architecture "noarch")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
set(spec_regex "*headers*")
CPackRPM: Fix handling of relocation prefix parent directories In commit 3ec02547 (CPackRPM: Allow multiple path relocation prefixes for one package, 2015-01-21) a regression was introduced that causes parent directories of relocation paths to be incorrectly included in the rpm. Fix this and make the test case more strict to cover it.
2015-02-27 02:33:48 +03:00
set(check_content_list "^/usr/foo/bar\n/usr/foo/bar/include\n/usr/foo/bar/include/mylib.h$")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
elseif(check_file_applications_match)
set(check_file_match_expected_summary ".*${CPACK_RPM_PACKAGE_SUMMARY}.*")
set(check_file_match_expected_description ".*${CPACK_COMPONENT_APPLICATIONS_DESCRIPTION}.*")
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
set(check_file_match_expected_relocation_path "Relocations${whitespaces}:${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_BINDIR}")
CPack/RPM architecture test fixup Fixed architecture test that was missing architecture in regular expressions - bug was detected on older rpm versions where the check failed. Extended architecture test that takes into account older versions of rpm. This patch is related to 15442.
2015-03-15 23:08:19 +03:00
set(check_file_match_expected_architecture "armv7hf")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
set(spec_regex "*applications*")
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
set(check_content_list "^/usr/foo/bar
/usr/foo/bar/bin
/usr/foo/bar/bin/mylibapp$")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
elseif(check_file_Unspecified_match)
set(check_file_match_expected_summary ".*${CPACK_RPM_PACKAGE_SUMMARY}.*")
set(check_file_match_expected_description ".*DESCRIPTION.*")
CPack/RPM relocation paths test fixup Patch fixes bug in test reported with id 15442 - older versions of rpm print out package info a bit differently so we should ignore white spaces
2015-03-15 22:37:16 +03:00
set(check_file_match_expected_relocation_path "Relocations${whitespaces}:${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_BINDIR}")
CPack/RPM architecture test fixup Fixed architecture test that was missing architecture in regular expressions - bug was detected on older rpm versions where the check failed. Extended architecture test that takes into account older versions of rpm. This patch is related to 15442.
2015-03-15 23:08:19 +03:00
set(check_file_match_expected_architecture "") # we don't explicitly set this value so it is different on each platform - ignore it
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
set(spec_regex "*Unspecified*")
CPackRPM: Fix handling of relocation prefix parent directories In commit 3ec02547 (CPackRPM: Allow multiple path relocation prefixes for one package, 2015-01-21) a regression was introduced that causes parent directories of relocation paths to be incorrectly included in the rpm. Fix this and make the test case more strict to cover it.
2015-02-27 02:33:48 +03:00
set(check_content_list "^/usr/foo/bar
/usr/foo/bar/bin
CPackRPM: Consolidate CPackComponentsForAll test case coverage Use test infrastructure added by commit 1cbb1562 (Fix handling of relocation prefix parent directories, 2015-02-26) to cover the same use cases from tests added by commit 5857ca5e (CPackRPM: Drop explicit handling of '@' symbols that breaks them, 2015-01-07) and drop the latter.
2015-02-27 02:36:25 +03:00
/usr/foo/bar/bin/@in@_@path@@with
/usr/foo/bar/bin/@in@_@path@@with/@and
/usr/foo/bar/bin/@in@_@path@@with/@and/@
/usr/foo/bar/bin/@in@_@path@@with/@and/@/@in_path@
CPackRPM content listing refactor Refactoring of content list that removes use of find and sed to make listing algorithm more clear and remove external dependencies. Patch also limits man pages handling to locations listed in brp-compress rpm script by default - fixes bug report #14660.
2015-04-19 19:22:18 +03:00
/usr/foo/bar/bin/@in@_@path@@with/@and/@/@in_path@/mylibapp2
/usr/foo/bar/share
/usr/foo/bar/share/man
/usr/foo/bar/share/man/mylib
/usr/foo/bar/share/man/mylib/man3
/usr/foo/bar/share/man/mylib/man3/mylib.1
/usr/foo/bar/share/man/mylib/man3/mylib.1/mylib
/usr/foo/bar/share/man/mylib/man3/mylib.1/mylib2$")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
else()
message(FATAL_ERROR "error: unexpected rpm package '${check_file}'")
endif()
CPackRPM: Fix handling of relocation prefix parent directories In commit 3ec02547 (CPackRPM: Allow multiple path relocation prefixes for one package, 2015-01-21) a regression was introduced that causes parent directories of relocation paths to be incorrectly included in the rpm. Fix this and make the test case more strict to cover it.
2015-02-27 02:33:48 +03:00
#######################
# test package info
#######################
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
string(REGEX MATCH ${check_file_match_expected_summary} check_file_match_summary ${check_file_content})
if(NOT check_file_match_summary)
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
message(FATAL_ERROR "error: '${check_file}' rpm package summary does not match expected value - regex '${check_file_match_expected_summary}'; RPM output: '${check_file_content}'")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
endif()
string(REGEX MATCH ${check_file_match_expected_description} check_file_match_description ${check_file_content})
if(NOT check_file_match_description)
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
message(FATAL_ERROR "error: '${check_file}' rpm package description does not match expected value - regex '${check_file_match_expected_description}'; RPM output: '${check_file_content}'")
endif()
string(REGEX MATCH ${check_file_match_expected_relocation_path} check_file_match_relocation_path ${check_file_content})
if(NOT check_file_match_relocation_path)
file(GLOB_RECURSE spec_file "${CPackComponentsForAll_BINARY_DIR}/${spec_regex}.spec")
if(spec_file)
file(READ ${spec_file} spec_file_content)
endif()
message(FATAL_ERROR "error: '${check_file}' rpm package relocation path does not match expected value - regex '${check_file_match_expected_relocation_path}'; RPM output: '${check_file_content}'; generated spec file: '${spec_file_content}'")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
endif()
CPackRPM: Fix handling of relocation prefix parent directories In commit 3ec02547 (CPackRPM: Allow multiple path relocation prefixes for one package, 2015-01-21) a regression was introduced that causes parent directories of relocation paths to be incorrectly included in the rpm. Fix this and make the test case more strict to cover it.
2015-02-27 02:33:48 +03:00
CPack/RPM architecture test fixup Fixed architecture test that was missing architecture in regular expressions - bug was detected on older rpm versions where the check failed. Extended architecture test that takes into account older versions of rpm. This patch is related to 15442.
2015-03-15 23:08:19 +03:00
#######################
# test package architecture
#######################
string(REGEX MATCH "Architecture${whitespaces}:" check_info_contains_arch ${check_file_content})
if(check_info_contains_arch) # test for rpm versions that contain architecture in package info (e.g. 4.11.x)
string(REGEX MATCH "Architecture${whitespaces}:${whitespaces}${check_file_match_expected_architecture}" check_file_match_architecture ${check_file_content})
if(NOT check_file_match_architecture)
Tests: CpackRPM test component architecture Test creating rpms of type "noarch", native, and "armv7hf"
2015-02-19 11:01:16 +03:00
message(FATAL_ERROR "error: '${check_file}' Architecture does not match expected value - '${check_file_match_expected_architecture}'; RPM output: '${check_file_content}'; generated spec file: '${spec_file_content}'")
CPack/RPM architecture test fixup Fixed architecture test that was missing architecture in regular expressions - bug was detected on older rpm versions where the check failed. Extended architecture test that takes into account older versions of rpm. This patch is related to 15442.
2015-03-15 23:08:19 +03:00
endif()
elseif(NOT check_package_architecture_result) # test result only on platforms that support -pqa rpm query
# test for rpm versions that do not contain architecture in package info (e.g. 4.8.x)
string(REGEX MATCH ".*${check_file_match_expected_architecture}" check_file_match_architecture "${check_package_architecture}")
if(NOT check_file_match_architecture)
message(FATAL_ERROR "error: '${check_file}' Architecture does not match expected value - '${check_file_match_expected_architecture}'; RPM output: '${check_package_architecture}'; generated spec file: '${spec_file_content}'")
endif()
# else rpm version too old (e.g. 4.4.x) - skip test
Merge branch 'cpack_rpm_mulit_prefix_fixup' into cpack_rpm_mulit_prefix_fixup-for-master Resolve conflict in Tests/CPackComponentsForAll/RunCPackVerifyResult.cmake by combining the changes from both sides.
2015-02-27 16:42:29 +03:00
endif()
CPackRPM: Fix handling of relocation prefix parent directories In commit 3ec02547 (CPackRPM: Allow multiple path relocation prefixes for one package, 2015-01-21) a regression was introduced that causes parent directories of relocation paths to be incorrectly included in the rpm. Fix this and make the test case more strict to cover it.
2015-02-27 02:33:48 +03:00
#######################
# test package content
#######################
string(REGEX MATCH "${check_content_list}" expected_content_list "${check_package_content}")
if(NOT expected_content_list)
file(GLOB_RECURSE spec_file "${CPackComponentsForAll_BINARY_DIR}/${spec_regex}.spec")
if(spec_file)
file(READ ${spec_file} spec_file_content)
endif()
message(FATAL_ERROR "error: '${check_file}' rpm package content does not match expected value - regex '${check_content_list}'; RPM output: '${check_package_content}'; generated spec file: '${spec_file_content}'")
Tests: CpackRPM test component architecture Test creating rpms of type "noarch", native, and "armv7hf"
2015-02-19 11:01:16 +03:00
endif()
cpack rpm setting of defattr RPM supports setting of default user, group, file and directory permissions that will be applied for files in package unless specified per file/dir with attr setting This is related to bug report 14714
2016-03-29 01:51:18 +03:00
# validate permissions user and group
execute_process(COMMAND ${RPM_EXECUTABLE} -pqlv ${check_file}
OUTPUT_VARIABLE check_file_content
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
if(check_file_libraries_match)
set(check_file_match_expected_permissions ".*-rwx------.*user.*defgrp.*")
elseif(check_file_headers_match)
set(check_file_match_expected_permissions ".*-rwxr--r--.*defusr.*defgrp.*")
elseif(check_file_applications_match)
set(check_file_match_expected_permissions ".*-rwxr--r--.*defusr.*group.*")
elseif(check_file_Unspecified_match)
set(check_file_match_expected_permissions ".*-rwxr--r--.*defusr.*defgrp.*")
else()
message(FATAL_ERROR "error: unexpected rpm package '${check_file}'")
endif()
string(REGEX MATCH "${check_file_match_expected_permissions}" check_file_match_permissions "${check_file_content}")
if(NOT check_file_match_permissions)
message(FATAL_ERROR "error: '${check_file}' rpm package permissions do not match expected value - regex '${check_file_match_expected_permissions}'")
endif()
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
endforeach()
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
#######################
# verify generated symbolic links
#######################
file(GLOB_RECURSE symlink_files RELATIVE "${CPackComponentsForAll_BINARY_DIR}" "${CPackComponentsForAll_BINARY_DIR}/*/symlink_*")
foreach(check_symlink IN LISTS symlink_files)
get_filename_component(symlink_name "${check_symlink}" NAME)
execute_process(COMMAND ls -la "${check_symlink}"
WORKING_DIRECTORY "${CPackComponentsForAll_BINARY_DIR}"
OUTPUT_VARIABLE SYMLINK_POINT_
OUTPUT_STRIP_TRAILING_WHITESPACE)
if("${symlink_name}" STREQUAL "symlink_samedir_path"
OR "${symlink_name}" STREQUAL "symlink_samedir_path_current_dir"
OR "${symlink_name}" STREQUAL "symlink_samedir_path_longer")
string(REGEX MATCH "^.*${whitespaces}->${whitespaces}depth_three$" check_symlink "${SYMLINK_POINT_}")
elseif("${symlink_name}" STREQUAL "symlink_subdir_path")
string(REGEX MATCH "^.*${whitespaces}->${whitespaces}depth_two/depth_three$" check_symlink "${SYMLINK_POINT_}")
elseif("${symlink_name}" STREQUAL "symlink_parentdir_path")
string(REGEX MATCH "^.*${whitespaces}->${whitespaces}../$" check_symlink "${SYMLINK_POINT_}")
elseif("${symlink_name}" STREQUAL "symlink_to_non_relocatable_path")
string(REGEX MATCH "^.*${whitespaces}->${whitespaces}${CPACK_PACKAGING_INSTALL_PREFIX}/non_relocatable/depth_two$" check_symlink "${SYMLINK_POINT_}")
elseif("${symlink_name}" STREQUAL "symlink_outside_package")
string(REGEX MATCH "^.*${whitespaces}->${whitespaces}outside_package$" check_symlink "${SYMLINK_POINT_}")
CPack/RPM external symlink handling Symbolic links that point to external location no longer cause cmake to fail with string out of bounds error but are instead packaged as non relocatable symlinks and print out a warning message.
2016-03-31 08:48:38 +03:00
elseif("${symlink_name}" STREQUAL "symlink_outside_wdr")
string(REGEX MATCH "^.*${whitespaces}->${whitespaces}/outside_package_wdr$" check_symlink "${SYMLINK_POINT_}")
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
elseif("${symlink_name}" STREQUAL "symlink_other_relocatable_path"
OR "${symlink_name}" STREQUAL "symlink_from_non_relocatable_path"
OR "${symlink_name}" STREQUAL "symlink_relocatable_subpath")
# these links were not canged - post install script only - ignore them
else()
message(FATAL_ERROR "error: unexpected rpm symbolic link '${check_symlink}'")
endif()
if(NOT check_symlink)
message(FATAL_ERROR "symlink points to unexpected location '${SYMLINK_POINT_}'")
endif()
endforeach()
# verify post install symlink relocation script
file(GLOB_RECURSE spec_file "${CPackComponentsForAll_BINARY_DIR}/*libraries*.spec")
file(READ ${spec_file} spec_file_content)
file(READ "${CMAKE_CURRENT_LIST_DIR}/symlink_postinstall_expected.txt" symlink_postinstall_expected)
# prepare regex
string(STRIP "${symlink_postinstall_expected}" symlink_postinstall_expected)
string(REPLACE "[" "\\[" symlink_postinstall_expected "${symlink_postinstall_expected}")
string(REPLACE "$" "\\$" symlink_postinstall_expected "${symlink_postinstall_expected}")
string(REPLACE "lib" "lib${LIB_SUFFIX}" symlink_postinstall_expected "${symlink_postinstall_expected}")
# compare
string(REGEX MATCH ".*${symlink_postinstall_expected}.*" symlink_postinstall_expected_matches "${spec_file_content}")
if(NOT symlink_postinstall_expected_matches)
message(FATAL_ERROR "error: unexpected rpm symbolic link postinstall script! generated spec file: '${spec_file_content}'")
endif()
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
endif()
endif()
CPackRPM: Add basic symlink support (#15209) RPM packages can contain symbolic links to relative paths - including support for multiple relocation paths through generation of post install relocation scripts. Add basic support with limitations described in documentation.
2015-03-29 21:55:20 +03:00
cmake_policy(POP)