kolan
/
CMake
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
CMake/CMakeLists.txt

782 lines
29 KiB
CMake
Raw Normal View History

Convert CMake to OSI-approved BSD License This converts the CMake license to a pure 3-clause OSI-approved BSD License. We drop the previous license clause requiring modified versions to be plainly marked. We also update the CMake copyright to cover the full development time range.
2009-09-28 19:43:28 +04:00
#=============================================================================
# CMake - Cross Platform Makefile Generator
Require CMake 2.8.2 or higher to build CMake Update the requirement specified in the top-level CMakeLists.txt file. Drop the special-case minimum required version of 2.8.0 because the new minimum subsumes it. Revert commit 6c611c6b (libarchive: Restore CMake 2.6.3 as minimum version, 2012-01-05) since our requirement now subsumes libarchive's.
2012-04-27 00:35:55 +04:00
# Copyright 2000-2012 Kitware, Inc., Insight Software Consortium
Convert CMake to OSI-approved BSD License This converts the CMake license to a pure 3-clause OSI-approved BSD License. We drop the previous license clause requiring modified versions to be plainly marked. We also update the CMake copyright to cover the full development time range.
2009-09-28 19:43:28 +04:00
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
Require CMake 2.8.12.2 to build CMake itself This will enable use of features such as ALIAS targets within CMake's own build.
2016-09-15 16:23:39 +03:00
cmake_minimum_required(VERSION 2.8.12.2 FATAL_ERROR)
Set policy CMP0025 to NEW while building CMake itself CMake is aware of the policy's NEW behavior and the AppleClang compiler id. Set the policy to NEW explicitly to avoid the warning and get the NEW behavior. Also teach the RunCMake test infrastructure to build tests with -DCMAKE_POLICY_DEFAULT_CMP0025=NEW to avoid the policy warning in test output that must match specific regular expressions.
2013-10-02 22:45:54 +04:00
if(POLICY CMP0025)
cmake_policy(SET CMP0025 NEW)
endif()
Build: Set CMP0053 to NEW. If this policy is WARN, then the ReplaceVariableInString is executed with both the new algorithm and the OLD slow algorithm. The NEW algorithm should be used wherever it works.
2015-08-23 19:29:47 +03:00
if(POLICY CMP0053)
cmake_policy(SET CMP0053 NEW)
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
project(CMake)
ENH: Set CMake Policy CMP0003 to NEW behavior to build without warnings with the upcoming CMake 2.6 release.
2008-03-17 23:22:28 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_BOOTSTRAP)
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
# Running from bootstrap script. Set local variable and remove from cache.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_BOOTSTRAP 1)
unset(CMAKE_BOOTSTRAP CACHE)
endif()
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(NOT CMake_TEST_EXTERNAL_CMAKE)
set(CMake_BIN_DIR ${CMake_BINARY_DIR}/bin)
endif()
Clean up CMake build tree 'bin' directory We re-arrange EXECUTABLE_OUTPUT_PATH settings to avoid putting utility and test executables in the 'bin' directory of the build tree. This makes the directory look like that in the installation tree, except that on multi-configuration generators we still use a per-config subdirectory.
2009-12-08 19:44:28 +03:00
cmake-gui: Reference LGPLv3 when redistributing Qt Download http://www.gnu.org/licenses/lgpl.txt and place it as Licenses/LGPLv3.txt in our source tree. When building cmake-gui, use option CMake_GUI_DISTRIBUTE_WITH_Qt_LGPL to enable notification in the "About" dialog of how the distribution of Qt is licensed. Install the license file as ${CMAKE_ROOT}/Licenses/LGPLv3.txt so that the dialog can display a path to it.
2016-06-17 22:02:54 +03:00
if(CMake_GUI_DISTRIBUTE_WITH_Qt_LGPL)
if(CMake_GUI_DISTRIBUTE_WITH_Qt_LGPL MATCHES "^3|2\\.1$")
set(USE_LGPL "${CMake_GUI_DISTRIBUTE_WITH_Qt_LGPL}")
else()
set(USE_LGPL "2.1")
endif()
else()
set(USE_LGPL "")
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if("${CMake_SOURCE_DIR}" STREQUAL "${CMAKE_SOURCE_DIR}")
Disable arch-specific try_run in CMake itself We disallow try_run() when CMAKE_TRY_COMPILE_OSX_ARCHITECTURES is set because the binary might not be able to run on the host architecture. This prevents us from creating ppc test binaries on i386 Mac machines that cause Rosetta install dialogs to appear.
2009-12-15 01:47:14 +03:00
# Disallow architecture-specific try_run. It may not run on the host.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(TRY_RUN)
if(CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
message(FATAL_ERROR "TRY_RUN not allowed with CMAKE_TRY_COMPILE_OSX_ARCHITECTURES=[${CMAKE_TRY_COMPILE_OSX_ARCHITECTURES}]")
else()
Disable arch-specific try_run in CMake itself We disallow try_run() when CMAKE_TRY_COMPILE_OSX_ARCHITECTURES is set because the binary might not be able to run on the host architecture. This prevents us from creating ppc test binaries on i386 Mac machines that cause Rosetta install dialogs to appear.
2009-12-15 01:47:14 +03:00
_TRY_RUN(${ARGV})
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
endif()
endmacro()
endif()
Disable arch-specific try_run in CMake itself We disallow try_run() when CMAKE_TRY_COMPILE_OSX_ARCHITECTURES is set because the binary might not be able to run on the host architecture. This prevents us from creating ppc test binaries on i386 Mac machines that cause Rosetta install dialogs to appear.
2009-12-15 01:47:14 +03:00
Build CMake with most-recent available language dialect. When CMake is built with CMake 3.1 or later, appropriate -std= options will be added for GNU and Clang compilers while building C and CXX code. This allows taking advantage of 'hidden' language features such as move-constructors, and allows the standard library to enable the use of more-advanced features too, where available. This does not change CMake host compiler requirements.
2014-11-19 02:30:40 +03:00
# Use most-recent available language dialects with GNU and Clang
Add options to build CMake without any language dialects If CMake_NO_<LANG>_STANDARD is set, do not set CMAKE_<LANG>_STANDARD. This will allow users to build with their own -std= flags without CMake adding any itself.
2015-03-10 21:49:40 +03:00
if(NOT DEFINED CMAKE_C_STANDARD AND NOT CMake_NO_C_STANDARD)
Avoid using C11 to build CMake if _Thread_local support is broken Support for C11's _Thread_local was introduced in GCC in the 4.9 series, even though we make the C11 compiler flags available in CMake with GCC >= 4.6. FreeBSD's runetype.h uses _Thread_local, which causes CMake's own build to fail when using GCC < 4.9 and -std=gnu11: /usr/include/runetype.h:92:22: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'const' extern _Thread_local const _RuneLocale *_ThreadRuneLocale; Add a test for _Thread_local support and only build CMake itself with C11 support if it works. Bug: http://www.cmake.org/Bug/view.php?id=15741
2015-09-15 17:31:12 +03:00
include(${CMake_SOURCE_DIR}/Source/Checks/cm_c11_thread_local.cmake)
if(NOT CMake_C11_THREAD_LOCAL_BROKEN)
set(CMAKE_C_STANDARD 11)
else()
set(CMAKE_C_STANDARD 99)
endif()
Add options to build CMake without latest language dialects Set CMAKE_C_STANDARD and CMAKE_CXX_STANDARD only if they are not already defined. This will allow users to add the settings with different values to their local cache (e.g. on the command line).
2014-12-05 22:06:43 +03:00
endif()
Add options to build CMake without any language dialects If CMake_NO_<LANG>_STANDARD is set, do not set CMAKE_<LANG>_STANDARD. This will allow users to build with their own -std= flags without CMake adding any itself.
2015-03-10 21:49:40 +03:00
if(NOT DEFINED CMAKE_CXX_STANDARD AND NOT CMake_NO_CXX_STANDARD)
Avoid using C++14 to build CMake if cstdio breaks The GNU 4.8 standard library's cstdio header is not aware that C++14 honors C11's removal of "gets" from stdio.h and results in an error: /.../include/c++/4.8/cstdio:120:11: error: no member named 'gets' in the global namespace Detect this problematic case and default to using C++11 instead of C++14 for building CMake itself.
2015-05-08 18:04:21 +03:00
include(${CMake_SOURCE_DIR}/Source/Checks/cm_cxx14_cstdio.cmake)
if(NOT CMake_CXX14_CSTDIO_BROKEN)
set(CMAKE_CXX_STANDARD 14)
else()
set(CMAKE_CXX_STANDARD 11)
endif()
Add options to build CMake without latest language dialects Set CMAKE_C_STANDARD and CMAKE_CXX_STANDARD only if they are not already defined. This will allow users to add the settings with different values to their local cache (e.g. on the command line).
2014-12-05 22:06:43 +03:00
endif()
Check for std::unordered_map only if we are building CMake When CMake_TEST_EXTERNAL_CMAKE is set then we are not actually building CMake so we do not need this check.
2015-05-20 18:35:16 +03:00
if(NOT CMake_TEST_EXTERNAL_CMAKE)
Make C++ feature checks extensible Turn the feature check for cxx11_unordered_map into a function such that we can use it for other features as well. Drop the 11 suffix, as we may want to check features from other standards.
2016-06-23 01:16:15 +03:00
include(${CMake_SOURCE_DIR}/Source/Checks/cm_cxx_features.cmake)
Check for std::unordered_map only if we are building CMake When CMake_TEST_EXTERNAL_CMAKE is set then we are not actually building CMake so we do not need this check.
2015-05-20 18:35:16 +03:00
endif()
Build CMake with most-recent available language dialect. When CMake is built with CMake 3.1 or later, appropriate -std= options will be added for GNU and Clang compilers while building C and CXX code. This allows taking advantage of 'hidden' language features such as move-constructors, and allows the standard library to enable the use of more-advanced features too, where available. This does not change CMake host compiler requirements.
2014-11-19 02:30:40 +03:00
Encoding: Provide option to configure CMake to use UTF-8 encoding.
2014-03-14 18:47:37 +04:00
# option to set the internal encoding of CMake to UTF-8
Encoding: Switch to use UTF-8 internally by default on Windows. This fixes several reported bugs about CMake not handling non-ascii paths on Windows. Practically, the use of some unicode characters may still be limited by the build or compiler tools. For example, a user may be limited by the build tools to using characters within the Windows ANSI code page (which can include non-ascii characters in the current system language).
2014-12-27 07:25:20 +03:00
option(CMAKE_ENCODING_UTF8 "Use UTF-8 encoding internally." ON)
Encoding: Provide option to configure CMake to use UTF-8 encoding.
2014-03-14 18:47:37 +04:00
mark_as_advanced(CMAKE_ENCODING_UTF8)
if(CMAKE_ENCODING_UTF8)
set(KWSYS_ENCODING_DEFAULT_CODEPAGE CP_UTF8)
endif()
CMake: New option CMake_INSTALL_COMPONENTS By default is OFF. Now it's used with CPack IFW himself installer.
2015-07-03 12:58:22 +03:00
# option to use COMPONENT with install command
option(CMake_INSTALL_COMPONENTS "Using components when installing" OFF)
mark_as_advanced(CMake_INSTALL_COMPONENTS)
macro(CMake_OPTIONAL_COMPONENT NAME)
if(CMake_INSTALL_COMPONENTS)
set(COMPONENT COMPONENT ${NAME})
else()
set(COMPONENT)
endif()
endmacro()
CMake: Add CMake_INSTALL_DEPENDENCIES option By default this option is ON. Turn OFF to disable installing runtime 3rd-party dependencies.
2015-07-24 10:15:06 +03:00
# option to disable installing 3rd-party dependencies
option(CMake_INSTALL_DEPENDENCIES
Do not install 3rd-party dependencies by default Disable the CMake_INSTALL_DEPENDENCIES option by default and turn it on explicitly in our packaging scripts. This simplifies packaging in distributions that provide the dependencies for us without having to install them. We only need 3rd-party runtime dependencies to be installed for packaging with redistributable binaries.
2015-08-05 20:28:35 +03:00
"Whether to install 3rd-party runtime dependencies" OFF)
CMake: Add CMake_INSTALL_DEPENDENCIES option By default this option is ON. Turn OFF to disable installing runtime 3rd-party dependencies.
2015-07-24 10:15:06 +03:00
mark_as_advanced(CMake_INSTALL_DEPENDENCIES)
Added CMake_BUILD_DEVELOPER_REFERENCE option By default is OFF and marked as advanced. It's also add custom cmake-developer-reference (ALL) target Generated output will be installed to ${CMAKE_DOC_DIR}/developer-reference.
2016-08-04 13:01:42 +03:00
# option to build reference for CMake developers
option(CMake_BUILD_DEVELOPER_REFERENCE
"Build CMake Developer Reference" OFF)
mark_as_advanced(CMake_BUILD_DEVELOPER_REFERENCE)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# a macro to deal with system libraries, implemented as a macro
# simply to improve readability of the main script
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(CMAKE_HANDLE_SYSTEM_LIBRARIES)
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
# Options have dependencies.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include(CMakeDependentOption)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
# Optionally use system xmlrpc. We no longer build or use it by default.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
option(CTEST_USE_XMLRPC "Enable xmlrpc submission method in CTest." OFF)
mark_as_advanced(CTEST_USE_XMLRPC)
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
# Allow the user to enable/disable all system utility library options by
# defining CMAKE_USE_SYSTEM_LIBRARIES or CMAKE_USE_SYSTEM_LIBRARY_${util}.
Add option to build CMake against a system libuv Create a CMAKE_USE_SYSTEM_LIBUV option.
2016-08-17 00:01:23 +03:00
set(UTILITIES BZIP2 CURL EXPAT FORM JSONCPP LIBARCHIVE LIBLZMA LIBUV ZLIB)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
foreach(util ${UTILITIES})
if(NOT DEFINED CMAKE_USE_SYSTEM_LIBRARY_${util}
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
AND DEFINED CMAKE_USE_SYSTEM_LIBRARIES)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_USE_SYSTEM_LIBRARY_${util} "${CMAKE_USE_SYSTEM_LIBRARIES}")
endif()
if(DEFINED CMAKE_USE_SYSTEM_LIBRARY_${util})
if(CMAKE_USE_SYSTEM_LIBRARY_${util})
set(CMAKE_USE_SYSTEM_LIBRARY_${util} ON)
else()
set(CMAKE_USE_SYSTEM_LIBRARY_${util} OFF)
endif()
if(CMAKE_BOOTSTRAP)
unset(CMAKE_USE_SYSTEM_LIBRARY_${util} CACHE)
endif()
string(TOLOWER "${util}" lutil)
set(CMAKE_USE_SYSTEM_${util} "${CMAKE_USE_SYSTEM_LIBRARY_${util}}"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
CACHE BOOL "Use system-installed ${lutil}" FORCE)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
else()
set(CMAKE_USE_SYSTEM_LIBRARY_${util} OFF)
endif()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endforeach()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_BOOTSTRAP)
unset(CMAKE_USE_SYSTEM_LIBRARIES CACHE)
endif()
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
# Optionally use system utility libraries.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
option(CMAKE_USE_SYSTEM_LIBARCHIVE "Use system-installed libarchive" "${CMAKE_USE_SYSTEM_LIBRARY_LIBARCHIVE}")
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_CURL "Use system-installed curl"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
"${CMAKE_USE_SYSTEM_LIBRARY_CURL}" "NOT CTEST_USE_XMLRPC" ON)
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_EXPAT "Use system-installed expat"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
"${CMAKE_USE_SYSTEM_LIBRARY_EXPAT}" "NOT CTEST_USE_XMLRPC" ON)
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_ZLIB "Use system-installed zlib"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
"${CMAKE_USE_SYSTEM_LIBRARY_ZLIB}" "NOT CMAKE_USE_SYSTEM_LIBARCHIVE;NOT CMAKE_USE_SYSTEM_CURL" ON)
Add option CMAKE_USE_SYSTEM_LIBARCHIVE (#10923) Finish the implementation of the option from the skeleton left by the initial addition of libarchive.
2010-07-29 18:12:09 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_BZIP2 "Use system-installed bzip2"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
"${CMAKE_USE_SYSTEM_LIBRARY_BZIP2}" "NOT CMAKE_USE_SYSTEM_LIBARCHIVE" ON)
CMake: Enable use of liblzma in libarchive (#14504) Build liblzma as part of CMake or find one on the system. Modify our port of libarchive to use the liblzma configured for use with CMake.
2014-07-14 00:23:22 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_LIBLZMA "Use system-installed liblzma"
"${CMAKE_USE_SYSTEM_LIBRARY_LIBLZMA}" "NOT CMAKE_USE_SYSTEM_LIBARCHIVE" ON)
ccmake: Add CMAKE_USE_SYSTEM_FORM option to use libform instead of cmForm
2014-11-18 23:47:02 +03:00
option(CMAKE_USE_SYSTEM_FORM "Use system-installed libform" "${CMAKE_USE_SYSTEM_LIBRARY_FORM}")
Add option to build CMake against a system jsoncpp Create a CMAKE_USE_SYSTEM_JSONCPP option.
2015-01-20 18:31:13 +03:00
option(CMAKE_USE_SYSTEM_JSONCPP "Use system-installed jsoncpp" "${CMAKE_USE_SYSTEM_LIBRARY_JSONCPP}")
Add option to build CMake against a system libuv Create a CMAKE_USE_SYSTEM_LIBUV option.
2016-08-17 00:01:23 +03:00
option(CMAKE_USE_SYSTEM_LIBUV "Use system-installed libuv" "${CMAKE_USE_SYSTEM_LIBRARY_LIBUV}")
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
Add option to use a system-installed KWIML Do not activate it with the general use-system-libs options for now because KWIML is not commonly distributed or available.
2015-12-18 17:57:55 +03:00
# For now use system KWIML only if explicitly requested rather
# than activating via the general system libs options.
option(CMAKE_USE_SYSTEM_KWIML "Use system-installed KWIML" OFF)
mark_as_advanced(CMAKE_USE_SYSTEM_KWIML)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# Mention to the user what system libraries are being used.
Add option to use a system-installed KWIML Do not activate it with the general use-system-libs options for now because KWIML is not commonly distributed or available.
2015-12-18 17:57:55 +03:00
foreach(util ${UTILITIES} KWIML)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_${util})
message(STATUS "Using system-installed ${util}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endforeach()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# Inform utility library header wrappers whether to use system versions.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/Utilities/cmThirdParty.h.in
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/Utilities/cmThirdParty.h
@ONLY)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endmacro()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# a macro to determine the generator and ctest executable to use
# for testing. Simply to improve readability of the main script.
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(CMAKE_SETUP_TESTING)
if(BUILD_TESTING)
set(CMAKE_TEST_SYSTEM_LIBRARIES 0)
foreach(util CURL EXPAT XMLRPC ZLIB)
if(CMAKE_USE_SYSTEM_${util})
set(CMAKE_TEST_SYSTEM_LIBRARIES 1)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endforeach()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# This variable is set by cmake, however to
# test cmake we want to make sure that
# the ctest from this cmake is used for testing
# and not the ctest from the cmake building and testing
# cmake.
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(CMake_TEST_EXTERNAL_CMAKE)
set(CMAKE_CTEST_COMMAND "${CMake_TEST_EXTERNAL_CMAKE}/ctest")
set(CMAKE_CMAKE_COMMAND "${CMake_TEST_EXTERNAL_CMAKE}/cmake")
set(CMAKE_CPACK_COMMAND "${CMake_TEST_EXTERNAL_CMAKE}/cpack")
foreach(exe cmake ctest cpack)
add_executable(${exe} IMPORTED)
set_property(TARGET ${exe} PROPERTY IMPORTED_LOCATION ${CMake_TEST_EXTERNAL_CMAKE}/${exe})
endforeach()
else()
set(CMAKE_CTEST_COMMAND "${CMake_BIN_DIR}/ctest")
set(CMAKE_CMAKE_COMMAND "${CMake_BIN_DIR}/cmake")
set(CMAKE_CPACK_COMMAND "${CMake_BIN_DIR}/cpack")
endif()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# configure some files for testing
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file("${CMAKE_CURRENT_SOURCE_DIR}/Templates/CTestScript.cmake.in"
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"${CMAKE_CURRENT_BINARY_DIR}/CTestScript.cmake"
Add test of all available CPack generators. Add this test with the goal of increasing coverage of the cpack source code, even/especially when the underlying packager tool is not installed. The test does not fail if there is a cpack problem with a certain generator. I expect some generators will fail on every machine running a CMake dashboard.
2009-10-20 22:31:10 +04:00
@ONLY)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/Tests/.NoDartCoverage
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/Tests/.NoDartCoverage)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/Tests/.NoDartCoverage
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/Modules/.NoDartCoverage)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/CTestCustom.cmake.in
ENH: Create CTestCustom.cmake instead of CTestCustom.ctest. Create the old file to include the new one for compatibility. This should prevent the long delays of CTest traversing the whole tree looking for CTestCustom.ctest files.
2007-08-31 22:51:09 +04:00
${CMake_BINARY_DIR}/CTestCustom.cmake @ONLY)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(BUILD_TESTING AND DART_ROOT)
configure_file(${CMake_SOURCE_DIR}/CMakeLogo.gif
BUG: undo accidental commit
2008-03-04 17:10:05 +03:00
${CMake_BINARY_DIR}/Testing/HTML/TestingResults/Icons/Logo.gif COPYONLY)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
mark_as_advanced(DART_ROOT)
mark_as_advanced(CURL_TESTING)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endmacro()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
New USE_FOLDERS property OFF by default. (#3796) Visual Studio Express editions do not support solution folders, so default behavior should be as if USE_FOLDERS global property is OFF. Also, allow folder names to be the same as target names: internally, use a prefix to distinguish folder GUIDs from target GUIDs. Add a target and folder with the same name in the ExternalProject test to exercise this code. For CMake itself, provide a new option CMAKE_USE_FOLDERS that defaults to ON so that Visual Studio users get a nicely organized CMake project. Express edition users will have to turn off the CMAKE_USE_FOLDERS option in order to build CMake in the VS Express IDE.
2010-10-02 01:23:53 +04:00
# Provide a way for Visual Studio Express users to turn OFF the new FOLDER
# organization feature. Default to ON for non-Express users. Express users must
# explicitly turn off this option to build CMake in the Express IDE...
#
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
option(CMAKE_USE_FOLDERS "Enable folder grouping of projects in IDEs." ON)
mark_as_advanced(CMAKE_USE_FOLDERS)
New USE_FOLDERS property OFF by default. (#3796) Visual Studio Express editions do not support solution folders, so default behavior should be as if USE_FOLDERS global property is OFF. Also, allow folder names to be the same as target names: internally, use a prefix to distinguish folder GUIDs from target GUIDs. Add a target and folder with the same name in the ExternalProject test to exercise this code. For CMake itself, provide a new option CMAKE_USE_FOLDERS that defaults to ON so that Visual Studio users get a nicely organized CMake project. Express edition users will have to turn off the CMAKE_USE_FOLDERS option in order to build CMake in the VS Express IDE.
2010-10-02 01:23:53 +04:00
#-----------------------------------------------------------------------
# a macro that only sets the FOLDER target property if it's
# "appropriate"
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(CMAKE_SET_TARGET_FOLDER tgt folder)
if(CMAKE_USE_FOLDERS)
set_property(GLOBAL PROPERTY USE_FOLDERS ON)
Require CMake 2.8.4 or greater to build CMake This allows the use of the $<TARGET_FILE:...> generator expression as a replacement for the use of the LOCATION target property. The use of the LOCATION target property is now deprecated for in-build targets. Also drop other checks for older CMake versions: * Simplify cmake_set_target_folder macro. * Use find_package(LibArchive) unconditionally. * Simplify condition for running testVisualStudioSlnParser test. * Convert two macros to functions. * Unconditionally run the CTestTestRerunFailed test.
2013-10-11 02:02:24 +04:00
if(MSVC AND TARGET ${tgt})
set_property(TARGET "${tgt}" PROPERTY FOLDER "${folder}")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
endif()
else()
set_property(GLOBAL PROPERTY USE_FOLDERS OFF)
endif()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endmacro()
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# a macro to build the utilities used by CMake
# Simply to improve readability of the main script.
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro (CMAKE_BUILD_UTILITIES)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Create the kwsys library for CMake.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(KWSYS_NAMESPACE cmsys)
set(KWSYS_USE_SystemTools 1)
set(KWSYS_USE_Directory 1)
set(KWSYS_USE_RegularExpression 1)
set(KWSYS_USE_Base64 1)
set(KWSYS_USE_MD5 1)
set(KWSYS_USE_Process 1)
set(KWSYS_USE_CommandLineArguments 1)
set(KWSYS_HEADER_ROOT ${CMake_BINARY_DIR}/Source)
Clean up install rules of CMake itself (#14371) Ensure CMAKE_DATA_DIR, CMAKE_DOC_DIR, and CMAKE_MAN_DIR are always relative paths in CMake code, and set defaults accordingly. Use the install() command instead of install_files() and install_targets(). This is more modern and also avoids stripping of the first character from user-specified destinations. While at it, fix the default destinations reported in the bootstrap help.
2013-08-26 19:50:08 +04:00
set(KWSYS_INSTALL_DOC_DIR "${CMAKE_DOC_DIR}")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_subdirectory(Source/kwsys)
set(kwsys_folder "Utilities/KWSys")
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE} "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}_c "${kwsys_folder}")
CMake: Reference test targets only when BUILD_TESTING is ON You cannot set a property on a target that's not there, and these targets are not there when BUILD_TESTING is OFF. Thanks to Sankhesh Jhaveri for the bug report.
2011-09-14 18:38:04 +04:00
if(BUILD_TESTING)
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestDynload "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestProcess "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestsC "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestsCxx "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestSharedForward "${kwsys_folder}")
endif()
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Setup third-party libraries.
# Everything in the tree should be able to include files from the
# Utilities directory.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include_directories(
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/Utilities
ENH: check in ability to build with new curl -f -DCMAKE_USE_NEW_CURL is set
2008-09-29 23:47:46 +04:00
${CMake_SOURCE_DIR}/Utilities
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
)
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# check for the use of system libraries versus builtin ones
ENH: minor fixes
2007-05-11 20:17:27 +04:00
# (a macro defined in this file)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
CMAKE_HANDLE_SYSTEM_LIBRARIES()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
Add option to use a system-installed KWIML Do not activate it with the general use-system-libs options for now because KWIML is not commonly distributed or available.
2015-12-18 17:57:55 +03:00
if(CMAKE_USE_SYSTEM_KWIML)
find_package(KWIML 1.0)
if(NOT KWIML_FOUND)
message(FATAL_ERROR "CMAKE_USE_SYSTEM_KWIML is ON but KWIML is not found!")
endif()
set(CMake_KWIML_LIBRARIES kwiml::kwiml)
else()
set(CMake_KWIML_LIBRARIES "")
if(BUILD_TESTING)
set(KWIML_TEST_ENABLE 1)
endif()
add_subdirectory(Utilities/KWIML)
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build zlib library for Curl, CMake, and CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_ZLIB_HEADER "cm_zlib.h")
if(CMAKE_USE_SYSTEM_ZLIB)
find_package(ZLIB)
if(NOT ZLIB_FOUND)
message(FATAL_ERROR
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"CMAKE_USE_SYSTEM_ZLIB is ON but a zlib is not found!")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_ZLIB_INCLUDES ${ZLIB_INCLUDE_DIR})
set(CMAKE_ZLIB_LIBRARIES ${ZLIB_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_ZLIB_INCLUDES ${CMake_SOURCE_DIR}/Utilities)
set(CMAKE_ZLIB_LIBRARIES cmzlib)
add_subdirectory(Utilities/cmzlib)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmzlib "Utilities/3rdParty")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build Curl library for CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_CURL)
find_package(CURL)
if(NOT CURL_FOUND)
message(FATAL_ERROR
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"CMAKE_USE_SYSTEM_CURL is ON but a curl is not found!")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_CURL_INCLUDES ${CURL_INCLUDE_DIRS})
set(CMAKE_CURL_LIBRARIES ${CURL_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CURL_SPECIAL_ZLIB_H ${CMAKE_ZLIB_HEADER})
set(CURL_SPECIAL_LIBZ_INCLUDES ${CMAKE_ZLIB_INCLUDES})
set(CURL_SPECIAL_LIBZ ${CMAKE_ZLIB_LIBRARIES})
curl: Configure build to work within CMake Set curl build options as needed for CMake rather than presenting them to the user in the cache. Drop the CMAKE_BUILD_CURL_SHARED option for now. Change the curl library name to 'cmcurl'. Disable blocks of code within curl CMakeLists.txt files that we do not need for CMake, but leave the code in place to make merging with curl updates easier.
2014-10-30 16:11:10 +03:00
add_definitions(-DCURL_STATICLIB)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_CURL_INCLUDES)
set(CMAKE_CURL_LIBRARIES cmcurl)
if(CMAKE_TESTS_CDASH_SERVER)
set(CMAKE_CURL_TEST_URL "${CMAKE_TESTS_CDASH_SERVER}/user.php")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Automatically use OpenSSL by default on Linux and FreeBSD if available Since https is almost ubiquitous nowadays we should support it by default whenever possible. When building our own curl, we already automatically enable SSL/TLS support on Windows and OS X by using the OS-native APIs. On UNIX platforms we need to use OpenSSL but have not done so by default before, leading to possible user confusion when https transfers fail later. Fix this by searching for OpenSSL quietly and enabling use of it automatically if it is found. Do this only on Linux and FreeBSD for now because on other UNIX platforms (e.g. AIX, HP-UX, SunOS) it seems too easy to find an OpenSSL that is not compatible with the target compiler.
2016-02-26 22:19:51 +03:00
set(_CMAKE_USE_OPENSSL_DEFAULT OFF)
if(NOT DEFINED CMAKE_USE_OPENSSL AND NOT WIN32 AND NOT APPLE
AND CMAKE_SYSTEM_NAME MATCHES "(Linux|FreeBSD)")
find_package(OpenSSL QUIET)
if(OPENSSL_FOUND)
set(_CMAKE_USE_OPENSSL_DEFAULT ON)
endif()
endif()
option(CMAKE_USE_OPENSSL "Use OpenSSL." ${_CMAKE_USE_OPENSSL_DEFAULT})
curl: Add CURL_CA_PATH option to CMake build process Move CMAKE_USE_OPENSSL and CURL_CA_BUNDLE up to the top of CMake so that CMake's own sources can know their values. Add the CURL_CA_PATH option at the top and honor it as part of the curl build.
2015-01-22 00:42:18 +03:00
mark_as_advanced(CMAKE_USE_OPENSSL)
if(CMAKE_USE_OPENSSL)
set(CURL_CA_BUNDLE "" CACHE FILEPATH "Path to SSL CA Certificate Bundle")
set(CURL_CA_PATH "" CACHE PATH "Path to SSL CA Certificate Directory")
mark_as_advanced(CURL_CA_BUNDLE CURL_CA_PATH)
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_subdirectory(Utilities/cmcurl)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmcurl "Utilities/3rdParty")
CMAKE_SET_TARGET_FOLDER(LIBCURL "Utilities/3rdParty")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build Compress library for CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_COMPRESS_INCLUDES
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"${CMAKE_CURRENT_BINARY_DIR}/Utilities/cmcompress")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_COMPRESS_LIBRARIES "cmcompress")
add_subdirectory(Utilities/cmcompress)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmcompress "Utilities/3rdParty")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_BZIP2)
find_package(BZip2)
else()
set(BZIP2_INCLUDE_DIR
Switch to using libarchive from libtar for cpack and cmake -E tar This allows for a built in bzip and zip capability, so external tools will not be needed for these packagers. The cmake -E tar xf should be able to handle all compression types now as well.
2009-10-30 20:10:56 +03:00
"${CMAKE_CURRENT_SOURCE_DIR}/Utilities/cmbzip2")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(BZIP2_LIBRARIES cmbzip2)
add_subdirectory(Utilities/cmbzip2)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmbzip2 "Utilities/3rdParty")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
endif()
Add option CMAKE_USE_SYSTEM_LIBARCHIVE (#10923) Finish the implementation of the option from the skeleton left by the initial addition of libarchive.
2010-07-29 18:12:09 +04:00
CMake: Enable use of liblzma in libarchive (#14504) Build liblzma as part of CMake or find one on the system. Modify our port of libarchive to use the liblzma configured for use with CMake.
2014-07-14 00:23:22 +04:00
#---------------------------------------------------------------------
# Build or use system liblzma for libarchive.
if(CMAKE_USE_SYSTEM_LIBLZMA)
find_package(LibLZMA)
if(NOT LIBLZMA_FOUND)
message(FATAL_ERROR "CMAKE_USE_SYSTEM_LIBLZMA is ON but LibLZMA is not found!")
endif()
set(LZMA_INCLUDE_DIR ${LIBLZMA_INCLUDE_DIRS})
set(LZMA_LIBRARY ${LIBLZMA_LIBRARIES})
else()
add_subdirectory(Utilities/cmliblzma)
CMAKE_SET_TARGET_FOLDER(cmliblzma "Utilities/3rdParty")
set(LZMA_INCLUDE_DIR
"${CMAKE_CURRENT_SOURCE_DIR}/Utilities/cmliblzma/liblzma/api")
set(LZMA_LIBRARY cmliblzma)
endif()
Add option CMAKE_USE_SYSTEM_LIBARCHIVE (#10923) Finish the implementation of the option from the skeleton left by the initial addition of libarchive.
2010-07-29 18:12:09 +04:00
#---------------------------------------------------------------------
# Build or use system libarchive for CMake and CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_LIBARCHIVE)
Require libarchive 3.0.0 or later Older versions do not provide archive_entry_copy_sourcepath_w.
2015-01-29 09:31:37 +03:00
find_package(LibArchive 3.0.0)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT LibArchive_FOUND)
message(FATAL_ERROR "CMAKE_USE_SYSTEM_LIBARCHIVE is ON but LibArchive is not found!")
endif()
set(CMAKE_TAR_INCLUDES ${LibArchive_INCLUDE_DIRS})
set(CMAKE_TAR_LIBRARIES ${LibArchive_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(ZLIB_INCLUDE_DIR ${CMAKE_ZLIB_INCLUDES})
set(ZLIB_LIBRARY ${CMAKE_ZLIB_LIBRARIES})
add_definitions(-DLIBARCHIVE_STATIC)
set(ENABLE_NETTLE OFF CACHE INTERNAL "Enable use of Nettle")
set(ENABLE_OPENSSL ${CMAKE_USE_OPENSSL} CACHE INTERNAL "Enable use of OpenSSL")
CMake: Enable use of liblzma in libarchive (#14504) Build liblzma as part of CMake or find one on the system. Modify our port of libarchive to use the liblzma configured for use with CMake.
2014-07-14 00:23:22 +04:00
set(ENABLE_LZMA ON CACHE INTERNAL "Enable the use of the system found LZMA library if found")
Update libarchive configuration within CMake Hard-code libarchive build options to the way CMake needs them. Set them as internal cache entries so users do not see them when building CMake.
2014-04-03 23:20:58 +04:00
set(ENABLE_ZLIB ON CACHE INTERNAL "Enable the use of the system found ZLIB library if found")
set(ENABLE_BZip2 ON CACHE INTERNAL "Enable the use of the system found BZip2 library if found")
Update libarchive configuration within CMake Hard-code libarchive build options to the way CMake needs them. Set them as internal cache entries so users do not see them when building CMake.
2015-10-21 18:08:30 +03:00
set(ENABLE_LIBXML2 OFF CACHE INTERNAL "Enable the use of the system found libxml2 library if found")
Update libarchive configuration within CMake Hard-code libarchive build options to the way CMake needs them. Set them as internal cache entries so users do not see them when building CMake.
2014-04-03 23:20:58 +04:00
set(ENABLE_EXPAT OFF CACHE INTERNAL "Enable the use of the system found EXPAT library if found")
set(ENABLE_PCREPOSIX OFF CACHE INTERNAL "Enable the use of the system found PCREPOSIX library if found")
set(ENABLE_LibGCC OFF CACHE INTERNAL "Enable the use of the system found LibGCC library if found")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(ENABLE_XATTR OFF CACHE INTERNAL "Enable extended attribute support")
set(ENABLE_ACL OFF CACHE INTERNAL "Enable ACL support")
set(ENABLE_ICONV OFF CACHE INTERNAL "Enable iconv support")
Update libarchive configuration within CMake Hard-code libarchive build options to the way CMake needs them. Set them as internal cache entries so users do not see them when building CMake.
2015-10-21 18:08:30 +03:00
set(ENABLE_CNG OFF CACHE INTERNAL "Enable the use of CNG(Crypto Next Generation)")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_subdirectory(Utilities/cmlibarchive)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmlibarchive "Utilities/3rdParty")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_TAR_LIBRARIES cmlibarchive ${BZIP2_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Switch to using libarchive from libtar for cpack and cmake -E tar This allows for a built in bzip and zip capability, so external tools will not be needed for these packagers. The cmake -E tar xf should be able to handle all compression types now as well.
2009-10-30 20:10:56 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build expat library for CMake and CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_EXPAT)
find_package(EXPAT)
if(NOT EXPAT_FOUND)
message(FATAL_ERROR
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"CMAKE_USE_SYSTEM_EXPAT is ON but a expat is not found!")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_EXPAT_INCLUDES ${EXPAT_INCLUDE_DIRS})
set(CMAKE_EXPAT_LIBRARIES ${EXPAT_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_EXPAT_INCLUDES)
set(CMAKE_EXPAT_LIBRARIES cmexpat)
add_subdirectory(Utilities/cmexpat)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmexpat "Utilities/3rdParty")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
jsoncpp: Build the library within CMake Update json/json.h to account for our lack of autolink.h. Update json/config.h to include KWSys Large File Support configuration so that consistent stream libraries are used (on AIX with XL). Add a cm_jsoncpp_reader.h header to include the CMake-provided copy of the json/reader.h header from CMake sources.
2015-01-13 18:45:04 +03:00
#---------------------------------------------------------------------
# Build jsoncpp library.
Add option to build CMake against a system jsoncpp Create a CMAKE_USE_SYSTEM_JSONCPP option.
2015-01-20 18:31:13 +03:00
if(CMAKE_USE_SYSTEM_JSONCPP)
FindJsonCpp: Drop new module due to upstream jsoncpp providing package Since jsoncpp 0.7.0 (2014-11-20) the upstream may provide a CMake package configuration file such that find_package(jsoncpp) will find a jsoncppConfig.cmake file. In order to avoid conflicting with this (especially on case-insensitive filesystems), and since we always prefer projects to provide package config files (that they maintain), it is better to not provide FindJsonCpp publicly. Move FindJsonCpp into a private source directory that is not installed so that we can still use it for building CMake itself. Reported-by: Ryan Pavlik <ryan.pavlik@gmail.com>
2015-02-20 16:15:43 +03:00
if(NOT CMAKE_VERSION VERSION_LESS 3.0)
include(${CMake_SOURCE_DIR}/Source/Modules/FindJsonCpp.cmake)
Add option to build CMake against a system jsoncpp Create a CMAKE_USE_SYSTEM_JSONCPP option.
2015-01-20 18:31:13 +03:00
else()
message(FATAL_ERROR "CMAKE_USE_SYSTEM_JSONCPP requires CMake >= 3.0")
endif()
if(NOT JsonCpp_FOUND)
message(FATAL_ERROR
"CMAKE_USE_SYSTEM_JSONCPP is ON but a JsonCpp is not found!")
endif()
set(CMAKE_JSONCPP_LIBRARIES JsonCpp::JsonCpp)
else()
set(CMAKE_JSONCPP_LIBRARIES cmjsoncpp)
add_subdirectory(Utilities/cmjsoncpp)
CMAKE_SET_TARGET_FOLDER(cmjsoncpp "Utilities/3rdParty")
endif()
jsoncpp: Build the library within CMake Update json/json.h to account for our lack of autolink.h. Update json/config.h to include KWSys Large File Support configuration so that consistent stream libraries are used (on AIX with XL). Add a cm_jsoncpp_reader.h header to include the CMake-provided copy of the json/reader.h header from CMake sources.
2015-01-13 18:45:04 +03:00
libuv: Build the library within CMake Take logic from upstream `Makefile.am` and `configure.ac` to build libuv sources. Update `uv.h` to include KWSys Large File Support configuration so that consistent stream libraries are used (on AIX with XL). Add a `cm_uv.h` header to include the CMake-provided copy of the `uv.h` header from CMake sources.
2016-08-16 23:26:39 +03:00
#---------------------------------------------------------------------
# Build libuv library.
if(NOT DEFINED CMAKE_USE_LIBUV)
set(CMAKE_USE_LIBUV 1)
Do not build libuv on Mac OS X 10.4 and lower It needs APIs that have been available only since 10.5. Also check that the CoreServices header can be included.
2016-08-25 20:43:50 +03:00
if(APPLE)
include(CheckCSourceCompiles)
check_c_source_compiles("
#include <CoreServices/CoreServices.h>
#include <AvailabilityMacros.h>
#ifndef MAC_OS_X_VERSION_10_5
#error \"MAC_OS_X_VERSION_10_5 is not defined\"
#endif
int main(void) { return 0; }
" HAVE_CoreServices_OS_X_10_5)
if(NOT HAVE_CoreServices_OS_X_10_5)
set(CMAKE_USE_LIBUV 0)
endif()
Do not build libuv on Cygwin Currently libuv does not support Cygwin (see libuv issue 832) in part due to lack of pthread APIs: https://cygwin.com/cygwin-api/std-notimpl.html
2016-08-26 15:17:42 +03:00
elseif(CYGWIN)
# libuv does not support Cygwin
set(CMAKE_USE_LIBUV 0)
Do not build libuv on HP-UX Some work may be needed to port to HP-UX.
2016-08-26 16:02:46 +03:00
elseif(CMAKE_SYSTEM_NAME STREQUAL "HP-UX")
# Disable until it can be ported.
set(CMAKE_USE_LIBUV 0)
Do not build libuv on SPARC Some work may be needed to port to SPARC with Solaris and Linux.
2016-08-26 15:57:40 +03:00
elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "sparc")
# Disable until it can be ported.
set(CMAKE_USE_LIBUV 0)
Do not build libuv on Mac OS X 10.4 and lower It needs APIs that have been available only since 10.5. Also check that the CoreServices header can be included.
2016-08-25 20:43:50 +03:00
endif()
libuv: Build the library within CMake Take logic from upstream `Makefile.am` and `configure.ac` to build libuv sources. Update `uv.h` to include KWSys Large File Support configuration so that consistent stream libraries are used (on AIX with XL). Add a `cm_uv.h` header to include the CMake-provided copy of the `uv.h` header from CMake sources.
2016-08-16 23:26:39 +03:00
endif()
if(CMAKE_USE_LIBUV)
Add option to build CMake against a system libuv Create a CMAKE_USE_SYSTEM_LIBUV option.
2016-08-17 00:01:23 +03:00
if(CMAKE_USE_SYSTEM_LIBUV)
if(NOT CMAKE_VERSION VERSION_LESS 3.0)
include(${CMake_SOURCE_DIR}/Source/Modules/FindLibUV.cmake)
else()
message(FATAL_ERROR "CMAKE_USE_SYSTEM_LIBUV requires CMake >= 3.0")
endif()
if(NOT LIBUV_FOUND)
message(FATAL_ERROR
"CMAKE_USE_SYSTEM_LIBUV is ON but a libuv is not found!")
endif()
set(CMAKE_LIBUV_LIBRARIES LibUV::LibUV)
else()
set(CMAKE_LIBUV_LIBRARIES cmlibuv)
add_subdirectory(Utilities/cmlibuv)
CMAKE_SET_TARGET_FOLDER(cmlibuv "Utilities/3rdParty")
endif()
libuv: Build the library within CMake Take logic from upstream `Makefile.am` and `configure.ac` to build libuv sources. Update `uv.h` to include KWSys Large File Support configuration so that consistent stream libraries are used (on AIX with XL). Add a `cm_uv.h` header to include the CMake-provided copy of the `uv.h` header from CMake sources.
2016-08-16 23:26:39 +03:00
else()
set(CMAKE_LIBUV_LIBRARIES)
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build XMLRPC library for CMake and CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CTEST_USE_XMLRPC)
find_package(XMLRPC QUIET REQUIRED libwww-client)
if(NOT XMLRPC_FOUND)
message(FATAL_ERROR
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
"CTEST_USE_XMLRPC is ON but xmlrpc is not found!")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_XMLRPC_INCLUDES ${XMLRPC_INCLUDE_DIRS})
set(CMAKE_XMLRPC_LIBRARIES ${XMLRPC_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Use curses?
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if (UNIX)
ENH: add support for the Syllable OS (http://www.syllable.org) major issues: -access() doesn't return false for an empty string (#ifdefed in cmake) -dlopen() doesn't return 0 on failure (#ifdefed in cmake and fixed now in Syllable) -the kwsys and Bootstrap tests fail with timeout due to the fact that I'm doing all that in qemu, which is quite slow -RPATH is now supported, so without modifying the test adapting DLL_PATH in Syllable is required for the tests to succeed -the Plugin test fails with an undefined reference to example_exe_function() in example_mod_1, it seems this isn't supported under Syllable Alex
2007-11-24 04:45:49 +03:00
# there is a bug in the Syllable libraries which makes linking ccmake fail, Alex
Fix if() checks of CMAKE_SYSTEM_NAME on Cygwin The CMAKE_SYSTEM_NAME is "CYGWIN", but we also define a variable named "CYGWIN" to "1". Avoid allowing if() to expand the "CYGWIN" string as a variable.
2014-09-09 17:09:57 +04:00
if(NOT CMAKE_SYSTEM_NAME MATCHES syllable)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CURSES_NEED_NCURSES TRUE)
find_package(Curses QUIET)
if (CURSES_LIBRARY)
option(BUILD_CursesDialog "Build the CMake Curses Dialog ccmake" ON)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("Curses libraries were not found. Curses GUI for CMake will not be built.")
set(BUILD_CursesDialog 0)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif ()
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(BUILD_CursesDialog 0)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
else ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(BUILD_CursesDialog 0)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(BUILD_CursesDialog)
ccmake: Add CMAKE_USE_SYSTEM_FORM option to use libform instead of cmForm
2014-11-18 23:47:02 +03:00
if(NOT CMAKE_USE_SYSTEM_FORM)
add_subdirectory(Source/CursesDialog/form)
elseif(NOT CURSES_FORM_LIBRARY)
message( FATAL_ERROR "CMAKE_USE_SYSTEM_FORM in ON but CURSES_FORM_LIBRARY is not set!" )
endif()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endmacro ()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
Poison GCC 3.3 on OpenBSD a bit later Move lines from commit 696a0af (Disable gcc 33 on OpenBSD because it crashes CPack by default, 2010-06-25) further down in CMakeLists.txt so that CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS applies. This fixes the code for building with CMake 2.4.
2010-07-06 17:54:36 +04:00
#-----------------------------------------------------------------------
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(NOT CMake_TEST_EXTERNAL_CMAKE)
if(CMAKE_CXX_PLATFORM_ID MATCHES "OpenBSD")
execute_process(COMMAND ${CMAKE_CXX_COMPILER}
${CMAKE_CXX_COMPILER_ARG1} -dumpversion
OUTPUT_VARIABLE _GXX_VERSION
)
string(REGEX REPLACE "([0-9])\\.([0-9])(\\.[0-9])?" "\\1\\2"
_GXX_VERSION_SHORT ${_GXX_VERSION})
if(_GXX_VERSION_SHORT EQUAL 33)
message(FATAL_ERROR
"GXX 3.3 on OpenBSD is known to cause CPack to Crash.\n"
"Please use GXX 4.2 or greater to build CMake on OpenBSD\n"
"${CMAKE_CXX_COMPILER} version is: ${_GXX_VERSION}")
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
endif()
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# The main section of the CMakeLists file
#
#-----------------------------------------------------------------------
Factor CMake version logic into dedicated module Move logic to compute CMake_VERSION out of the top-level CMakeLists.txt file to a dedicated Source/CMakeVersionCompute.cmake module and include it from the original location. This will allow it to be re-used.
2013-09-19 23:45:41 +04:00
# Compute CMake_VERSION, etc.
include(Source/CMakeVersionCompute.cmake)
ENH: Centralized setting of CMake version number to top-level CMake listfile.
2003-02-14 05:57:05 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# Include the standard Dart testing module
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
enable_testing()
include (${CMAKE_ROOT}/Modules/Dart.cmake)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
Apply CMake test-time config to all tests We configure an EnforceConfig.cmake script to load at CTest time. Previously we loaded it from Tests/CTestTestfile.cmake, but now we load it from the top level so it applies to all tests.
2009-12-10 18:33:42 +03:00
# Set up test-time configuration.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set_directory_properties(PROPERTIES
Apply CMake test-time config to all tests We configure an EnforceConfig.cmake script to load at CTest time. Previously we loaded it from Tests/CTestTestfile.cmake, but now we load it from the top level so it applies to all tests.
2009-12-10 18:33:42 +03:00
TEST_INCLUDE_FILE "${CMake_BINARY_DIR}/Tests/EnforceConfig.cmake")
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(NOT CMake_TEST_EXTERNAL_CMAKE)
# where to write the resulting executables and libraries
set(BUILD_SHARED_LIBS OFF)
set(EXECUTABLE_OUTPUT_PATH "" CACHE INTERNAL "No configurable exe dir.")
set(LIBRARY_OUTPUT_PATH "" CACHE INTERNAL
"Where to put the libraries for CMake")
COMP: CMake should be build static. Also propagate build_shared_libs to curl
2005-03-01 22:21:45 +03:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
# The CMake executables usually do not need any rpath to run in the build or
# install tree.
set(CMAKE_SKIP_RPATH ON CACHE INTERNAL "CMake does not need RPATHs.")
ENH: CMake does not need RPATHs at all for its own executables. Disable them to avoid relinking during installation.
2006-03-02 03:00:08 +03:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
# Load install destinations.
include(Source/CMakeInstallDestinations.cmake)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(BUILD_TESTING)
include(${CMake_SOURCE_DIR}/Tests/CMakeInstall.cmake)
endif()
Test 'install' target of CMake itself We create option CMake_TEST_INSTALL to enable a new CMake.Install test. It tests running the "make install" target to install CMake itself into a test directory. We enable the option by default for dashboard builds.
2009-12-10 18:34:36 +03:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
# include special compile flags for some compilers
include(CompileFlags.cmake)
ENH: Merged use of kwsys library.
2003-06-23 16:58:58 +04:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
# no clue why we are testing for this here
include(CheckSymbolExists)
CHECK_SYMBOL_EXISTS(unsetenv "stdlib.h" HAVE_UNSETENV)
CHECK_SYMBOL_EXISTS(environ "stdlib.h" HAVE_ENVIRON_NOT_REQUIRE_PROTOTYPE)
endif()
ENH: Simplify the test
2006-03-18 00:14:04 +03:00
Add CMAKE_TESTS_CDASH_SERVER variable and CTestSubmitLargeOutput test. If defined and non-empty, the value of CMAKE_TESTS_CDASH_SERVER should point to a CDash server willing to accept submissions for a project named PublicDashboard. On machines that also run a CDash dashboard, set this variable to "http://localhost/CDash-trunk-Testing" so that the CMake tests that submit dashboards do not have to send those submissions over the wire. The CTestSubmitLargeOutput test runs a dashboard that has a test that produces very large amount of output on stdout/stderr. Since we do not even want to attempt to send such large output over the wire, this test is off by default unless the CMAKE_TESTS_CDASH_SERVER server is localhost. This test is expected to cause a submission failure when sent to CDash. It passes if the submit results contain error output. It fails if the submit succeeds. CMAKE_TESTS_CDASH_SERVER: CDash server used by CMake/Tests. If not defined or "", this variable defaults to the server at http://www.cdash.org/CDash. If set explicitly to "NOTFOUND", curl tests and ctest tests that use the network are skipped. If set to something starting with "http://localhost/", the CDash is expected to be an instance of CDash used for CDash testing, pointing to a cdash4simpletest database. In these cases, the CDash dashboards should be run first.
2010-03-08 20:14:47 +03:00
# CMAKE_TESTS_CDASH_SERVER: CDash server used by CMake/Tests.
#
# If not defined or "", this variable defaults to the server at
Update CDash server URL It is now at open.cdash.org and does not start in "/CDash".
2014-06-24 21:35:33 +04:00
# "http://open.cdash.org".
Add CMAKE_TESTS_CDASH_SERVER variable and CTestSubmitLargeOutput test. If defined and non-empty, the value of CMAKE_TESTS_CDASH_SERVER should point to a CDash server willing to accept submissions for a project named PublicDashboard. On machines that also run a CDash dashboard, set this variable to "http://localhost/CDash-trunk-Testing" so that the CMake tests that submit dashboards do not have to send those submissions over the wire. The CTestSubmitLargeOutput test runs a dashboard that has a test that produces very large amount of output on stdout/stderr. Since we do not even want to attempt to send such large output over the wire, this test is off by default unless the CMAKE_TESTS_CDASH_SERVER server is localhost. This test is expected to cause a submission failure when sent to CDash. It passes if the submit results contain error output. It fails if the submit succeeds. CMAKE_TESTS_CDASH_SERVER: CDash server used by CMake/Tests. If not defined or "", this variable defaults to the server at http://www.cdash.org/CDash. If set explicitly to "NOTFOUND", curl tests and ctest tests that use the network are skipped. If set to something starting with "http://localhost/", the CDash is expected to be an instance of CDash used for CDash testing, pointing to a cdash4simpletest database. In these cases, the CDash dashboards should be run first.
2010-03-08 20:14:47 +03:00
#
# If set explicitly to "NOTFOUND", curl tests and ctest tests that use
# the network are skipped.
#
# If set to something starting with "http://localhost/", the CDash is
# expected to be an instance of CDash used for CDash testing, pointing
# to a cdash4simpletest database. In these cases, the CDash dashboards
# should be run first.
#
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if("x${CMAKE_TESTS_CDASH_SERVER}" STREQUAL "x")
Update CDash server URL It is now at open.cdash.org and does not start in "/CDash".
2014-06-24 21:35:33 +04:00
set(CMAKE_TESTS_CDASH_SERVER "http://open.cdash.org")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Add CMAKE_TESTS_CDASH_SERVER variable and CTestSubmitLargeOutput test. If defined and non-empty, the value of CMAKE_TESTS_CDASH_SERVER should point to a CDash server willing to accept submissions for a project named PublicDashboard. On machines that also run a CDash dashboard, set this variable to "http://localhost/CDash-trunk-Testing" so that the CMake tests that submit dashboards do not have to send those submissions over the wire. The CTestSubmitLargeOutput test runs a dashboard that has a test that produces very large amount of output on stdout/stderr. Since we do not even want to attempt to send such large output over the wire, this test is off by default unless the CMAKE_TESTS_CDASH_SERVER server is localhost. This test is expected to cause a submission failure when sent to CDash. It passes if the submit results contain error output. It fails if the submit succeeds. CMAKE_TESTS_CDASH_SERVER: CDash server used by CMake/Tests. If not defined or "", this variable defaults to the server at http://www.cdash.org/CDash. If set explicitly to "NOTFOUND", curl tests and ctest tests that use the network are skipped. If set to something starting with "http://localhost/", the CDash is expected to be an instance of CDash used for CDash testing, pointing to a cdash4simpletest database. In these cases, the CDash dashboards should be run first.
2010-03-08 20:14:47 +03:00
Add option to use a system-installed KWIML Do not activate it with the general use-system-libs options for now because KWIML is not commonly distributed or available.
2015-12-18 17:57:55 +03:00
if(CMake_TEST_EXTERNAL_CMAKE)
Port CMake from cmIML to KWIML KWIML no longer uses a configured prefix.
2015-12-17 23:03:42 +03:00
set(KWIML_TEST_ENABLE 1)
Add option to use a system-installed KWIML Do not activate it with the general use-system-libs options for now because KWIML is not commonly distributed or available.
2015-12-18 17:57:55 +03:00
add_subdirectory(Utilities/KWIML)
Port CMake from cmIML to KWIML KWIML no longer uses a configured prefix.
2015-12-17 23:03:42 +03:00
endif()
Tests: Build and test KWIML even when testing an external CMake The CMake_TEST_EXTERNAL_CMAKE option added by commit 9608ef6f (Tests: Optionally configure tests exclusively, 2014-03-03) is intended to allow one to run the CMake test suite with a compiler that may not be supported for hosting the build of CMake itself. However, we currently use the CMake test infrastructure to test KWIML everywhere that CMake supports. In order to continue testing KWIML even in places that CMake itself does not build, include it even when testing an external CMake.
2014-07-07 19:23:13 +04:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(NOT CMake_TEST_EXTERNAL_CMAKE)
# build the utilities (a macro defined in this file)
CMAKE_BUILD_UTILITIES()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
# On NetBSD ncurses is required, since curses doesn't have the wsyncup()
# function. ncurses is installed via pkgsrc, so the library is in /usr/pkg/lib,
# which isn't in the default linker search path. So without RPATH ccmake
# doesn't run and the build doesn't succeed since ccmake is executed for
# generating the documentation.
if(BUILD_CursesDialog)
get_filename_component(_CURSES_DIR "${CURSES_LIBRARY}" PATH)
set(CURSES_NEED_RPATH FALSE)
if(NOT "${_CURSES_DIR}" STREQUAL "/lib" AND NOT "${_CURSES_DIR}" STREQUAL "/usr/lib" AND NOT "${_CURSES_DIR}" STREQUAL "/lib64" AND NOT "${_CURSES_DIR}" STREQUAL "/usr/lib64")
set(CURSES_NEED_RPATH TRUE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(BUILD_QtDialog)
if(APPLE)
set(CMAKE_BUNDLE_VERSION
"${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}.${CMake_VERSION_PATCH}")
set(CMAKE_BUNDLE_LOCATION "${CMAKE_INSTALL_PREFIX}")
# make sure CMAKE_INSTALL_PREFIX ends in /
Simplify logic to compute install prefix in OS X CMake.app Also avoid explicitly dereferencing a variable in an if() condition.
2015-04-09 15:02:40 +03:00
if(NOT CMAKE_INSTALL_PREFIX MATCHES "/$")
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
set(CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}/")
endif()
set(CMAKE_INSTALL_PREFIX
"${CMAKE_INSTALL_PREFIX}CMake.app/Contents")
endif()
set(QT_NEED_RPATH FALSE)
if(NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib64" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib64")
set(QT_NEED_RPATH TRUE)
endif()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
COMP: use RPATH is building QtDialog and the Qt libs are not in /lib or /usr/lib (same logic as for ccmake) Alex
2007-11-06 02:06:02 +03:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
# The same might be true on other systems for other libraries.
# Then only enable RPATH if we have are building at least with cmake 2.4,
# since this one has much better RPATH features than cmake 2.2.
# The executables are then built with the RPATH for the libraries outside
# the build tree, which is both the build and the install RPATH.
if (UNIX)
if( CMAKE_USE_SYSTEM_CURL OR CMAKE_USE_SYSTEM_ZLIB
OR CMAKE_USE_SYSTEM_EXPAT OR CTEST_USE_XMLRPC OR CURSES_NEED_RPATH OR QT_NEED_RPATH)
set(CMAKE_SKIP_RPATH OFF CACHE INTERNAL "CMake built with RPATH.")
set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
set(CMAKE_BUILD_WITH_INSTALL_RPATH TRUE)
endif()
endif ()
COMP: enable RPATH if any of the CMAKE_USE_SYSTEM_XXX variables is enabled or if the curses library is neither in /lib nor in /usr/lib . This makes it build on NetBSD. For more comments see CMakeLists.txt Alex
2007-08-28 19:02:24 +04:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
# add the uninstall support
configure_file(
"${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
@ONLY)
add_custom_target(uninstall
"${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")
ENH: added some release support
2005-06-28 18:56:29 +04:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
include (CMakeCPack.cmake)
endif()
ENH: use a safer check for CPack
2006-01-05 17:18:13 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# setup some Testing support (a macro defined in this file)
CMAKE_SETUP_TESTING()
BUG: allow system information to accept the -G option
2007-02-28 20:25:19 +03:00
cmake-server: Bare-bones server implementation Adds a bare-bones cmake-server implementation and makes it possible to start that with "cmake -E server". Communication happens via stdin/stdout for now. Protocol is based on Json objects surrounded by magic strings ("[== CMake Server ==[" and "]== CMake Server ==]"), which simplifies Json parsing significantly. This patch also defines an interface used to implement different versions of the protocol spoken by the server, but does not include any protocol implementaiton.
2016-09-13 12:26:34 +03:00
# Check whether to build server mode or not:
set(CMake_HAVE_SERVER_MODE 0)
if(NOT CMake_TEST_EXTERNAL_CMAKE AND NOT CMAKE_BOOTSTRAP AND CMAKE_USE_LIBUV)
list(FIND CMAKE_CXX_COMPILE_FEATURES cxx_auto_type CMake_HAVE_CXX_AUTO_TYPE)
list(FIND CMAKE_CXX_COMPILE_FEATURES cxx_range_for CMake_HAVE_CXX_RANGE_FOR)
if(CMake_HAVE_CXX_AUTO_TYPE AND CMake_HAVE_CXX_RANGE_FOR)
if(CMake_HAVE_CXX_MAKE_UNIQUE)
set(CMake_HAVE_SERVER_MODE 1)
endif()
endif()
endif()
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(NOT CMake_TEST_EXTERNAL_CMAKE)
if(NOT CMake_VERSION_IS_RELEASE)
Avoid if() quoted auto-dereference When testing CMAKE_<LANG>_COMPILER_ID values, do not explicitly dereference or quote the variable. We want if() to auto-dereference the variable and not its value. Also replace MATCHES with STREQUAL where equivalent.
2014-10-14 18:25:32 +04:00
if(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
NOT "${CMAKE_C_COMPILER_VERSION}" VERSION_LESS 4.2)
set(C_FLAGS_LIST -Wcast-align -Werror-implicit-function-declaration -Wchar-subscripts
-Wall -W -Wpointer-arith -Wwrite-strings -Wformat-security
-Wmissing-format-attribute -fno-common -Wundef
)
set(CXX_FLAGS_LIST -Wnon-virtual-dtor -Wcast-align -Wchar-subscripts -Wall -W
-Wshadow -Wpointer-arith -Wformat-security -Wundef
)
foreach(FLAG_LANG C CXX)
foreach(FLAG ${${FLAG_LANG}_FLAGS_LIST})
if(NOT " ${CMAKE_${FLAG_LANG}_FLAGS} " MATCHES " ${FLAG} ")
set(CMAKE_${FLAG_LANG}_FLAGS "${CMAKE_${FLAG_LANG}_FLAGS} ${FLAG}")
endif()
endforeach()
Enable some compiler warnings when building CMake. The warnings are enabled for now only when using GCC 4.2 or later. It may be possible later to also enable them when building CMake with clang. Don't duplicate the compiler flags if already set.
2012-09-23 17:02:23 +04:00
endforeach()
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
unset(C_FLAGS_LIST)
unset(CXX_FLAGS_LIST)
endif()
Enable some compiler warnings when building CMake. The warnings are enabled for now only when using GCC 4.2 or later. It may be possible later to also enable them when building CMake with clang. Don't duplicate the compiler flags if already set.
2012-09-23 17:02:23 +04:00
endif()
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
# build the remaining subdirectories
add_subdirectory(Source)
add_subdirectory(Utilities)
Enable some compiler warnings when building CMake. The warnings are enabled for now only when using GCC 4.2 or later. It may be possible later to also enable them when building CMake with clang. Don't duplicate the compiler flags if already set.
2012-09-23 17:02:23 +04:00
endif()
ENH: move CMAKE_STRICT option to the top
2007-11-06 22:14:18 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_subdirectory(Tests)
BUG: allow system information to accept the -G option
2007-02-28 20:25:19 +03:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(NOT CMake_TEST_EXTERNAL_CMAKE)
if(BUILD_TESTING)
CMAKE_SET_TARGET_FOLDER(CMakeLibTests "Tests")
endif()
if(TARGET documentation)
CMAKE_SET_TARGET_FOLDER(documentation "Documentation")
endif()
Set IDE folder for CMake 'documentation' target only if it exists The documentation target will be come optional, so do not reference it when it does not exist.
2013-10-07 22:06:04 +04:00
endif()
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# add a test
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_test(SystemInformationNew "${CMAKE_CMAKE_COMMAND}"
Tests: Drop CMAKE_TEST_GENERATOR(|_TOOLSET) variables s/CMAKE_TEST_GENERATOR/CMAKE_GENERATOR/g
2014-03-03 23:06:34 +04:00
--system-information -G "${CMAKE_GENERATOR}" )
BUG: possible fix for new SystemInfo test
2007-02-27 21:04:29 +03:00
Tests: Optionally configure tests exclusively, with an external CMake Add an undocumented CMake_TEST_EXTERNAL_CMAKE option to name an external CMake 'bin' directory. Skip all main CMake binary builds and instead configure the Tests directory to run using the external CMake provided. This will provide a means to exercise the CMake test suite generating for target platforms and compilers with which the CMake source does not build. That will allow us to raise the level of C++ features required of a compiler to build our source while retaining tests for generating projects with older compiler tools.
2014-03-04 00:24:03 +04:00
if(NOT CMake_TEST_EXTERNAL_CMAKE)
# Install license file as it requires.
install(FILES Copyright.txt DESTINATION ${CMAKE_DOC_DIR})
# Install script directories.
install(
DIRECTORY Help Modules Templates
DESTINATION ${CMAKE_DATA_DIR}
FILE_PERMISSIONS OWNER_READ OWNER_WRITE GROUP_READ WORLD_READ
DIRECTORY_PERMISSIONS OWNER_READ OWNER_EXECUTE OWNER_WRITE
GROUP_READ GROUP_EXECUTE
WORLD_READ WORLD_EXECUTE
PATTERN "*.sh*" PERMISSIONS OWNER_READ OWNER_EXECUTE OWNER_WRITE
GROUP_READ GROUP_EXECUTE
WORLD_READ WORLD_EXECUTE
)
# Install auxiliary files integrating with other tools.
add_subdirectory(Auxiliary)
endif()