kolan
/
CMake
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
CMake/CMakeLists.txt

635 lines
24 KiB
CMake
Raw Normal View History

Convert CMake to OSI-approved BSD License This converts the CMake license to a pure 3-clause OSI-approved BSD License. We drop the previous license clause requiring modified versions to be plainly marked. We also update the CMake copyright to cover the full development time range.
2009-09-28 19:43:28 +04:00
#=============================================================================
# CMake - Cross Platform Makefile Generator
Require CMake 2.8.2 or higher to build CMake Update the requirement specified in the top-level CMakeLists.txt file. Drop the special-case minimum required version of 2.8.0 because the new minimum subsumes it. Revert commit 6c611c6b (libarchive: Restore CMake 2.6.3 as minimum version, 2012-01-05) since our requirement now subsumes libarchive's.
2012-04-27 00:35:55 +04:00
# Copyright 2000-2012 Kitware, Inc., Insight Software Consortium
Convert CMake to OSI-approved BSD License This converts the CMake license to a pure 3-clause OSI-approved BSD License. We drop the previous license clause requiring modified versions to be plainly marked. We also update the CMake copyright to cover the full development time range.
2009-09-28 19:43:28 +04:00
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
cmake_minimum_required(VERSION 2.8.2 FATAL_ERROR)
set(CMAKE_LEGACY_CYGWIN_WIN32 0) # Remove when CMake >= 2.8.4 is required
project(CMake)
ENH: Set CMake Policy CMP0003 to NEW behavior to build without warnings with the upcoming CMake 2.6 release.
2008-03-17 23:22:28 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_BOOTSTRAP)
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
# Running from bootstrap script. Set local variable and remove from cache.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_BOOTSTRAP 1)
unset(CMAKE_BOOTSTRAP CACHE)
endif()
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMake_BIN_DIR ${CMake_BINARY_DIR}/bin)
Clean up CMake build tree 'bin' directory We re-arrange EXECUTABLE_OUTPUT_PATH settings to avoid putting utility and test executables in the 'bin' directory of the build tree. This makes the directory look like that in the installation tree, except that on multi-configuration generators we still use a per-config subdirectory.
2009-12-08 19:44:28 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if("${CMake_SOURCE_DIR}" STREQUAL "${CMAKE_SOURCE_DIR}")
Disable arch-specific try_run in CMake itself We disallow try_run() when CMAKE_TRY_COMPILE_OSX_ARCHITECTURES is set because the binary might not be able to run on the host architecture. This prevents us from creating ppc test binaries on i386 Mac machines that cause Rosetta install dialogs to appear.
2009-12-15 01:47:14 +03:00
# Disallow architecture-specific try_run. It may not run on the host.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(TRY_RUN)
if(CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
message(FATAL_ERROR "TRY_RUN not allowed with CMAKE_TRY_COMPILE_OSX_ARCHITECTURES=[${CMAKE_TRY_COMPILE_OSX_ARCHITECTURES}]")
else()
Disable arch-specific try_run in CMake itself We disallow try_run() when CMAKE_TRY_COMPILE_OSX_ARCHITECTURES is set because the binary might not be able to run on the host architecture. This prevents us from creating ppc test binaries on i386 Mac machines that cause Rosetta install dialogs to appear.
2009-12-15 01:47:14 +03:00
_TRY_RUN(${ARGV})
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
endif()
endmacro()
endif()
Disable arch-specific try_run in CMake itself We disallow try_run() when CMAKE_TRY_COMPILE_OSX_ARCHITECTURES is set because the binary might not be able to run on the host architecture. This prevents us from creating ppc test binaries on i386 Mac machines that cause Rosetta install dialogs to appear.
2009-12-15 01:47:14 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# a macro to deal with system libraries, implemented as a macro
# simply to improve readability of the main script
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(CMAKE_HANDLE_SYSTEM_LIBRARIES)
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
# Options have dependencies.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include(CMakeDependentOption)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
# Optionally use system xmlrpc. We no longer build or use it by default.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
option(CTEST_USE_XMLRPC "Enable xmlrpc submission method in CTest." OFF)
mark_as_advanced(CTEST_USE_XMLRPC)
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
# Allow the user to enable/disable all system utility library options by
# defining CMAKE_USE_SYSTEM_LIBRARIES or CMAKE_USE_SYSTEM_LIBRARY_${util}.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(UTILITIES BZIP2 CURL EXPAT LIBARCHIVE ZLIB)
foreach(util ${UTILITIES})
if(NOT DEFINED CMAKE_USE_SYSTEM_LIBRARY_${util}
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
AND DEFINED CMAKE_USE_SYSTEM_LIBRARIES)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_USE_SYSTEM_LIBRARY_${util} "${CMAKE_USE_SYSTEM_LIBRARIES}")
endif()
if(DEFINED CMAKE_USE_SYSTEM_LIBRARY_${util})
if(CMAKE_USE_SYSTEM_LIBRARY_${util})
set(CMAKE_USE_SYSTEM_LIBRARY_${util} ON)
else()
set(CMAKE_USE_SYSTEM_LIBRARY_${util} OFF)
endif()
if(CMAKE_BOOTSTRAP)
unset(CMAKE_USE_SYSTEM_LIBRARY_${util} CACHE)
endif()
string(TOLOWER "${util}" lutil)
set(CMAKE_USE_SYSTEM_${util} "${CMAKE_USE_SYSTEM_LIBRARY_${util}}"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
CACHE BOOL "Use system-installed ${lutil}" FORCE)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
else()
set(CMAKE_USE_SYSTEM_LIBRARY_${util} OFF)
endif()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endforeach()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_BOOTSTRAP)
unset(CMAKE_USE_SYSTEM_LIBRARIES CACHE)
endif()
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
# Optionally use system utility libraries.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
option(CMAKE_USE_SYSTEM_LIBARCHIVE "Use system-installed libarchive" "${CMAKE_USE_SYSTEM_LIBRARY_LIBARCHIVE}")
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_CURL "Use system-installed curl"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
"${CMAKE_USE_SYSTEM_LIBRARY_CURL}" "NOT CTEST_USE_XMLRPC" ON)
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_EXPAT "Use system-installed expat"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
"${CMAKE_USE_SYSTEM_LIBRARY_EXPAT}" "NOT CTEST_USE_XMLRPC" ON)
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_ZLIB "Use system-installed zlib"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
"${CMAKE_USE_SYSTEM_LIBRARY_ZLIB}" "NOT CMAKE_USE_SYSTEM_LIBARCHIVE;NOT CMAKE_USE_SYSTEM_CURL" ON)
Add option CMAKE_USE_SYSTEM_LIBARCHIVE (#10923) Finish the implementation of the option from the skeleton left by the initial addition of libarchive.
2010-07-29 18:12:09 +04:00
CMAKE_DEPENDENT_OPTION(CMAKE_USE_SYSTEM_BZIP2 "Use system-installed bzip2"
bootstrap: Granular system library selection (#11431) This adds the ability for packagers to specify that some libraries should use system versions and others should use the CMake versions. This allows a bit of flexibility and means Homebrew (an OSX package manager) no longer has to continue to patch the CMake build process. Inspired-by: Mike McQuaid <mike@mikemcquaid.com>
2011-01-10 17:32:09 +03:00
"${CMAKE_USE_SYSTEM_LIBRARY_BZIP2}" "NOT CMAKE_USE_SYSTEM_LIBARCHIVE" ON)
ENH: Simplify decision to use system libraries Previously we disallowed use of system libraries if FindXMLRPC.cmake was not available. Now that CMake 2.4 is required to build, the module is always available. This change simplifies the logic accordingly.
2009-06-11 17:04:04 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# Mention to the user what system libraries are being used.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
foreach(util ${UTILITIES})
if(CMAKE_USE_SYSTEM_${util})
message(STATUS "Using system-installed ${util}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endforeach()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# Inform utility library header wrappers whether to use system versions.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/Utilities/cmThirdParty.h.in
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/Utilities/cmThirdParty.h
@ONLY)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endmacro()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_BUILD_ON_VISUAL_STUDIO 0)
if(WIN32 AND NOT UNIX AND NOT BORLAND AND NOT MINGW )
set(CMAKE_BUILD_ON_VISUAL_STUDIO 1)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# a macro to determine the generator and ctest executable to use
# for testing. Simply to improve readability of the main script.
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(CMAKE_SETUP_TESTING)
if (NOT DART_ROOT)
set(MAKEPROGRAM ${CMAKE_MAKE_PROGRAM})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif ()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(BUILD_TESTING)
set(CMAKE_TEST_GENERATOR "" CACHE STRING
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"Generator used when running tests")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_TEST_MAKEPROGRAM "" CACHE FILEPATH
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"Generator used when running tests")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT CMAKE_TEST_GENERATOR)
set(CMAKE_TEST_GENERATOR "${CMAKE_GENERATOR}")
set(CMAKE_TEST_MAKEPROGRAM "${MAKEPROGRAM}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_TEST_DIFFERENT_GENERATOR TRUE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# Are we testing with the MSVC compiler?
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_TEST_MSVC 0)
if(MSVC AND NOT CMAKE_TEST_DIFFERENT_GENERATOR)
set(CMAKE_TEST_MSVC 1)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if("${CMAKE_TEST_GENERATOR}" MATCHES "NMake" OR
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"${CMAKE_TEST_GENERATOR}" MATCHES "Visual Studio")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_TEST_MSVC 1)
endif("${CMAKE_TEST_GENERATOR}" MATCHES "NMake" OR
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"${CMAKE_TEST_GENERATOR}" MATCHES "Visual Studio")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_TEST_SYSTEM_LIBRARIES 0)
foreach(util CURL EXPAT XMLRPC ZLIB)
if(CMAKE_USE_SYSTEM_${util})
set(CMAKE_TEST_SYSTEM_LIBRARIES 1)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endforeach()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# This variable is set by cmake, however to
# test cmake we want to make sure that
# the ctest from this cmake is used for testing
# and not the ctest from the cmake building and testing
# cmake.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_CTEST_COMMAND "${CMake_BIN_DIR}/ctest")
set(CMAKE_CMAKE_COMMAND "${CMake_BIN_DIR}/cmake")
set(CMAKE_CPACK_COMMAND "${CMake_BIN_DIR}/cpack")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# configure some files for testing
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file("${CMAKE_CURRENT_SOURCE_DIR}/Templates/CTestScript.cmake.in"
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"${CMAKE_CURRENT_BINARY_DIR}/CTestScript.cmake"
Add test of all available CPack generators. Add this test with the goal of increasing coverage of the cpack source code, even/especially when the underlying packager tool is not installed. The test does not fail if there is a cpack problem with a certain generator. I expect some generators will fail on every machine running a CMake dashboard.
2009-10-20 22:31:10 +04:00
@ONLY)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/Tests/.NoDartCoverage
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/Tests/.NoDartCoverage)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/Tests/.NoDartCoverage
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/Modules/.NoDartCoverage)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/CTestCustom.cmake.in
ENH: Create CTestCustom.cmake instead of CTestCustom.ctest. Create the old file to include the new one for compatibility. This should prevent the long delays of CTest traversing the whole tree looking for CTestCustom.ctest files.
2007-08-31 22:51:09 +04:00
${CMake_BINARY_DIR}/CTestCustom.cmake @ONLY)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(${CMake_SOURCE_DIR}/CTestCustom.ctest.in
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/CTestCustom.ctest @ONLY)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(BUILD_TESTING AND DART_ROOT)
configure_file(${CMake_SOURCE_DIR}/CMakeLogo.gif
BUG: undo accidental commit
2008-03-04 17:10:05 +03:00
${CMake_BINARY_DIR}/Testing/HTML/TestingResults/Icons/Logo.gif COPYONLY)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
mark_as_advanced(DART_ROOT)
mark_as_advanced(CURL_TESTING)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endmacro()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
New USE_FOLDERS property OFF by default. (#3796) Visual Studio Express editions do not support solution folders, so default behavior should be as if USE_FOLDERS global property is OFF. Also, allow folder names to be the same as target names: internally, use a prefix to distinguish folder GUIDs from target GUIDs. Add a target and folder with the same name in the ExternalProject test to exercise this code. For CMake itself, provide a new option CMAKE_USE_FOLDERS that defaults to ON so that Visual Studio users get a nicely organized CMake project. Express edition users will have to turn off the CMAKE_USE_FOLDERS option in order to build CMake in the VS Express IDE.
2010-10-02 01:23:53 +04:00
# Provide a way for Visual Studio Express users to turn OFF the new FOLDER
# organization feature. Default to ON for non-Express users. Express users must
# explicitly turn off this option to build CMake in the Express IDE...
#
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
option(CMAKE_USE_FOLDERS "Enable folder grouping of projects in IDEs." ON)
mark_as_advanced(CMAKE_USE_FOLDERS)
New USE_FOLDERS property OFF by default. (#3796) Visual Studio Express editions do not support solution folders, so default behavior should be as if USE_FOLDERS global property is OFF. Also, allow folder names to be the same as target names: internally, use a prefix to distinguish folder GUIDs from target GUIDs. Add a target and folder with the same name in the ExternalProject test to exercise this code. For CMake itself, provide a new option CMAKE_USE_FOLDERS that defaults to ON so that Visual Studio users get a nicely organized CMake project. Express edition users will have to turn off the CMAKE_USE_FOLDERS option in order to build CMake in the VS Express IDE.
2010-10-02 01:23:53 +04:00
#-----------------------------------------------------------------------
# a macro that only sets the FOLDER target property if it's
# "appropriate"
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro(CMAKE_SET_TARGET_FOLDER tgt folder)
if(CMAKE_USE_FOLDERS)
set_property(GLOBAL PROPERTY USE_FOLDERS ON)
New USE_FOLDERS property OFF by default. (#3796) Visual Studio Express editions do not support solution folders, so default behavior should be as if USE_FOLDERS global property is OFF. Also, allow folder names to be the same as target names: internally, use a prefix to distinguish folder GUIDs from target GUIDs. Add a target and folder with the same name in the ExternalProject test to exercise this code. For CMake itself, provide a new option CMAKE_USE_FOLDERS that defaults to ON so that Visual Studio users get a nicely organized CMake project. Express edition users will have to turn off the CMAKE_USE_FOLDERS option in order to build CMake in the VS Express IDE.
2010-10-02 01:23:53 +04:00
# Really, I just want this to be an "if(TARGET ${tgt})" ...
# but I'm not sure that our min req'd., CMake 2.4.5 can handle
# that... so I'm just activating this for now, with a version
# compare, and only for MSVC builds.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(MSVC)
if(NOT ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION} LESS 2.8)
set_property(TARGET "${tgt}" PROPERTY FOLDER "${folder}")
endif()
endif()
else()
set_property(GLOBAL PROPERTY USE_FOLDERS OFF)
endif()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endmacro()
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# a macro to build the utilities used by CMake
# Simply to improve readability of the main script.
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
macro (CMAKE_BUILD_UTILITIES)
Configure KWIML inside CMake as cmIML
2011-06-27 22:15:37 +04:00
#---------------------------------------------------------------------
# Create the KWIML library for CMake.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(KWIML cmIML)
set(KWIML_HEADER_ROOT ${CMake_BINARY_DIR}/Utilities)
add_subdirectory(Utilities/KWIML)
Configure KWIML inside CMake as cmIML
2011-06-27 22:15:37 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Create the kwsys library for CMake.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(KWSYS_NAMESPACE cmsys)
set(KWSYS_USE_SystemTools 1)
set(KWSYS_USE_Directory 1)
set(KWSYS_USE_RegularExpression 1)
set(KWSYS_USE_Base64 1)
set(KWSYS_USE_MD5 1)
set(KWSYS_USE_Process 1)
set(KWSYS_USE_CommandLineArguments 1)
set(KWSYS_HEADER_ROOT ${CMake_BINARY_DIR}/Source)
set(KWSYS_INSTALL_DOC_DIR "${CMake_DOC_DEST}")
add_subdirectory(Source/kwsys)
set(kwsys_folder "Utilities/KWSys")
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE} "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}_c "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}EncodeExecutable "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}ProcessFwd9x "${kwsys_folder}")
CMake: Reference test targets only when BUILD_TESTING is ON You cannot set a property on a target that's not there, and these targets are not there when BUILD_TESTING is OFF. Thanks to Sankhesh Jhaveri for the bug report.
2011-09-14 18:38:04 +04:00
if(BUILD_TESTING)
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestDynload "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestProcess "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestsC "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestsCxx "${kwsys_folder}")
CMAKE_SET_TARGET_FOLDER(${KWSYS_NAMESPACE}TestSharedForward "${kwsys_folder}")
endif()
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Setup third-party libraries.
# Everything in the tree should be able to include files from the
# Utilities directory.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include_directories(
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
${CMake_BINARY_DIR}/Utilities
ENH: check in ability to build with new curl -f -DCMAKE_USE_NEW_CURL is set
2008-09-29 23:47:46 +04:00
${CMake_SOURCE_DIR}/Utilities
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
)
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# check for the use of system libraries versus builtin ones
ENH: minor fixes
2007-05-11 20:17:27 +04:00
# (a macro defined in this file)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
CMAKE_HANDLE_SYSTEM_LIBRARIES()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build zlib library for Curl, CMake, and CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_ZLIB_HEADER "cm_zlib.h")
if(CMAKE_USE_SYSTEM_ZLIB)
find_package(ZLIB)
if(NOT ZLIB_FOUND)
message(FATAL_ERROR
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"CMAKE_USE_SYSTEM_ZLIB is ON but a zlib is not found!")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_ZLIB_INCLUDES ${ZLIB_INCLUDE_DIR})
set(CMAKE_ZLIB_LIBRARIES ${ZLIB_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_ZLIB_INCLUDES ${CMake_SOURCE_DIR}/Utilities)
set(CMAKE_ZLIB_LIBRARIES cmzlib)
add_subdirectory(Utilities/cmzlib)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmzlib "Utilities/3rdParty")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build Curl library for CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_CURL)
find_package(CURL)
if(NOT CURL_FOUND)
message(FATAL_ERROR
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"CMAKE_USE_SYSTEM_CURL is ON but a curl is not found!")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_CURL_INCLUDES ${CURL_INCLUDE_DIRS})
set(CMAKE_CURL_LIBRARIES ${CURL_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CURL_SPECIAL_ZLIB_H ${CMAKE_ZLIB_HEADER})
set(CURL_SPECIAL_LIBZ_INCLUDES ${CMAKE_ZLIB_INCLUDES})
set(CURL_SPECIAL_LIBZ ${CMAKE_ZLIB_LIBRARIES})
option(CMAKE_BUILD_CURL_SHARED "Should curl be built shared" FALSE)
if(NOT CMAKE_BUILD_CURL_SHARED)
add_definitions(-DCURL_STATICLIB)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_CURL_INCLUDES)
set(CMAKE_CURL_LIBRARIES cmcurl)
if(CMAKE_TESTS_CDASH_SERVER)
set(CMAKE_CURL_TEST_URL "${CMAKE_TESTS_CDASH_SERVER}/user.php")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_subdirectory(Utilities/cmcurl)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmcurl "Utilities/3rdParty")
CMAKE_SET_TARGET_FOLDER(LIBCURL "Utilities/3rdParty")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build Compress library for CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_COMPRESS_INCLUDES
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"${CMAKE_CURRENT_BINARY_DIR}/Utilities/cmcompress")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_COMPRESS_LIBRARIES "cmcompress")
add_subdirectory(Utilities/cmcompress)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmcompress "Utilities/3rdParty")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_BZIP2)
find_package(BZip2)
else()
set(BZIP2_INCLUDE_DIR
Switch to using libarchive from libtar for cpack and cmake -E tar This allows for a built in bzip and zip capability, so external tools will not be needed for these packagers. The cmake -E tar xf should be able to handle all compression types now as well.
2009-10-30 20:10:56 +03:00
"${CMAKE_CURRENT_SOURCE_DIR}/Utilities/cmbzip2")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(BZIP2_LIBRARIES cmbzip2)
add_subdirectory(Utilities/cmbzip2)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmbzip2 "Utilities/3rdParty")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
endif()
Add option CMAKE_USE_SYSTEM_LIBARCHIVE (#10923) Finish the implementation of the option from the skeleton left by the initial addition of libarchive.
2010-07-29 18:12:09 +04:00
#---------------------------------------------------------------------
# Build or use system libarchive for CMake and CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_LIBARCHIVE)
if(EXISTS ${CMAKE_ROOT}/Modules/FindLibArchive.cmake) # added in 2.8.3
find_package(LibArchive)
else()
include(${CMake_SOURCE_DIR}/Modules/FindLibArchive.cmake)
endif()
if(NOT LibArchive_FOUND)
message(FATAL_ERROR "CMAKE_USE_SYSTEM_LIBARCHIVE is ON but LibArchive is not found!")
endif()
set(CMAKE_TAR_INCLUDES ${LibArchive_INCLUDE_DIRS})
set(CMAKE_TAR_LIBRARIES ${LibArchive_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(ZLIB_INCLUDE_DIR ${CMAKE_ZLIB_INCLUDES})
set(ZLIB_LIBRARY ${CMAKE_ZLIB_LIBRARIES})
add_definitions(-DLIBARCHIVE_STATIC)
set(ENABLE_NETTLE OFF CACHE INTERNAL "Enable use of Nettle")
set(ENABLE_OPENSSL ${CMAKE_USE_OPENSSL} CACHE INTERNAL "Enable use of OpenSSL")
set(ENABLE_XATTR OFF CACHE INTERNAL "Enable extended attribute support")
set(ENABLE_ACL OFF CACHE INTERNAL "Enable ACL support")
set(ENABLE_ICONV OFF CACHE INTERNAL "Enable iconv support")
add_subdirectory(Utilities/cmlibarchive)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmlibarchive "Utilities/3rdParty")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_TAR_LIBRARIES cmlibarchive ${BZIP2_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Switch to using libarchive from libtar for cpack and cmake -E tar This allows for a built in bzip and zip capability, so external tools will not be needed for these packagers. The cmake -E tar xf should be able to handle all compression types now as well.
2009-10-30 20:10:56 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build expat library for CMake and CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_USE_SYSTEM_EXPAT)
find_package(EXPAT)
if(NOT EXPAT_FOUND)
message(FATAL_ERROR
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"CMAKE_USE_SYSTEM_EXPAT is ON but a expat is not found!")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_EXPAT_INCLUDES ${EXPAT_INCLUDE_DIRS})
set(CMAKE_EXPAT_LIBRARIES ${EXPAT_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_EXPAT_INCLUDES)
set(CMAKE_EXPAT_LIBRARIES cmexpat)
add_subdirectory(Utilities/cmexpat)
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmexpat "Utilities/3rdParty")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Build XMLRPC library for CMake and CTest.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CTEST_USE_XMLRPC)
find_package(XMLRPC QUIET REQUIRED libwww-client)
if(NOT XMLRPC_FOUND)
message(FATAL_ERROR
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
"CTEST_USE_XMLRPC is ON but xmlrpc is not found!")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_XMLRPC_INCLUDES ${XMLRPC_INCLUDE_DIRS})
set(CMAKE_XMLRPC_LIBRARIES ${XMLRPC_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#---------------------------------------------------------------------
# Use curses?
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if (UNIX)
ENH: add support for the Syllable OS (http://www.syllable.org) major issues: -access() doesn't return false for an empty string (#ifdefed in cmake) -dlopen() doesn't return 0 on failure (#ifdefed in cmake and fixed now in Syllable) -the kwsys and Bootstrap tests fail with timeout due to the fact that I'm doing all that in qemu, which is quite slow -RPATH is now supported, so without modifying the test adapting DLL_PATH in Syllable is required for the tests to succeed -the Plugin test fails with an undefined reference to example_exe_function() in example_mod_1, it seems this isn't supported under Syllable Alex
2007-11-24 04:45:49 +03:00
# there is a bug in the Syllable libraries which makes linking ccmake fail, Alex
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(NOT "${CMAKE_SYSTEM_NAME}" MATCHES syllable)
set(CURSES_NEED_NCURSES TRUE)
find_package(Curses QUIET)
if (CURSES_LIBRARY)
option(BUILD_CursesDialog "Build the CMake Curses Dialog ccmake" ON)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message("Curses libraries were not found. Curses GUI for CMake will not be built.")
set(BUILD_CursesDialog 0)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif ()
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(BUILD_CursesDialog 0)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
else ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(BUILD_CursesDialog 0)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(BUILD_CursesDialog)
add_subdirectory(Source/CursesDialog/form)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endmacro ()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
Poison GCC 3.3 on OpenBSD a bit later Move lines from commit 696a0af (Disable gcc 33 on OpenBSD because it crashes CPack by default, 2010-06-25) further down in CMakeLists.txt so that CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS applies. This fixes the code for building with CMake 2.4.
2010-07-06 17:54:36 +04:00
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(CMAKE_CXX_PLATFORM_ID MATCHES "OpenBSD")
execute_process(COMMAND ${CMAKE_CXX_COMPILER}
Poison GCC 3.3 on OpenBSD a bit later Move lines from commit 696a0af (Disable gcc 33 on OpenBSD because it crashes CPack by default, 2010-06-25) further down in CMakeLists.txt so that CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS applies. This fixes the code for building with CMake 2.4.
2010-07-06 17:54:36 +04:00
${CMAKE_CXX_COMPILER_ARG1} -dumpversion
OUTPUT_VARIABLE _GXX_VERSION
)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
string(REGEX REPLACE "([0-9])\\.([0-9])(\\.[0-9])?" "\\1\\2"
Poison GCC 3.3 on OpenBSD a bit later Move lines from commit 696a0af (Disable gcc 33 on OpenBSD because it crashes CPack by default, 2010-06-25) further down in CMakeLists.txt so that CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS applies. This fixes the code for building with CMake 2.4.
2010-07-06 17:54:36 +04:00
_GXX_VERSION_SHORT ${_GXX_VERSION})
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(_GXX_VERSION_SHORT EQUAL 33)
message(FATAL_ERROR
Poison GCC 3.3 on OpenBSD a bit later Move lines from commit 696a0af (Disable gcc 33 on OpenBSD because it crashes CPack by default, 2010-06-25) further down in CMakeLists.txt so that CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS applies. This fixes the code for building with CMake 2.4.
2010-07-06 17:54:36 +04:00
"GXX 3.3 on OpenBSD is known to cause CPack to Crash.\n"
"Please use GXX 4.2 or greater to build CMake on OpenBSD\n"
"${CMAKE_CXX_COMPILER} version is: ${_GXX_VERSION}")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
endif()
endif()
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# The main section of the CMakeLists file
#
#-----------------------------------------------------------------------
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include(Source/CMakeVersion.cmake)
Refactor CMake version handling Move the CMake version number components out of "CMakeLists.txt" into dedicated file "Source/CMakeVersion.cmake". Set the TWEAK level to the date explicitly. Add a "Source/CMakeVersion.bash" script to update the date, thus replacing KWSys DateStamp for CMake. Teach the bootstrap script to extract the version components from their new location.
2012-04-20 19:20:48 +04:00
# Releases define a small tweak level.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if("${CMake_VERSION_TWEAK}" VERSION_LESS 20000000)
set(CMake_VERSION_IS_RELEASE 1)
set(CMake_VERSION_SOURCE "")
else()
set(CMake_VERSION_IS_RELEASE 0)
include(${CMake_SOURCE_DIR}/Source/CMakeVersionSource.cmake)
endif()
ENH: for CVS CMake have cpack use the version date in the name of the package
2007-09-07 22:20:14 +04:00
New version scheme to support branchy workflow Prepare to switch to the workflow described by "git help workflows". In this workflow, the "master" branch is always used to integrate topics ready for release. Brand new work merges into a "next" branch instead. We need a new versioning scheme to work this way because the version on "master" must always increase. We no longer use an even/odd minor number to distinguish releases from development versions. Since we still support cvs checkout of our source tree we cannot depend on "git describe" to compute a version number based on the history graph. We can use the CCYYMMDD nightly date stamp to get a monotonically increasing version component. The new version format is "major.minor.patch.(tweak|date)". Releases use a tweak level in the half-open range [0,20000000), which is smaller than any current or future date. For tweak=0 we do not show the tweak component, leaving the format "major.minor.patch" for most releases. Development versions use date=CCYYMMDD for the tweak level. The major.minor.patch part of development versions on "master" always matches the most recent release. For example, a first-parent traversal of "master" might see v2.8.1 2.8.1.20100422 v2.8.2 | | | ----o----o----o----o----o----o----o----o---- Since the date appears in the tweak component, the next release can increment the patch level (or any more significant component) to be greater than any version leading to it. Topic branches not ready for release are published only on "next" so we know that all versions on master lead between two releases.
2010-04-23 17:44:23 +04:00
# Compute the full version string.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMake_VERSION ${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}.${CMake_VERSION_PATCH})
if(${CMake_VERSION_TWEAK} GREATER 0)
set(CMake_VERSION ${CMake_VERSION}.${CMake_VERSION_TWEAK})
endif()
if(CMake_VERSION_RC)
set(CMake_VERSION ${CMake_VERSION}-rc${CMake_VERSION_RC})
endif()
if(CMake_VERSION_SOURCE)
set(CMake_VERSION ${CMake_VERSION}-${CMake_VERSION_SOURCE})
endif()
ENH: Centralized setting of CMake version number to top-level CMake listfile.
2003-02-14 05:57:05 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# Include the standard Dart testing module
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
enable_testing()
include (${CMAKE_ROOT}/Modules/Dart.cmake)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
Apply CMake test-time config to all tests We configure an EnforceConfig.cmake script to load at CTest time. Previously we loaded it from Tests/CTestTestfile.cmake, but now we load it from the top level so it applies to all tests.
2009-12-10 18:33:42 +03:00
# Set up test-time configuration.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set_directory_properties(PROPERTIES
Apply CMake test-time config to all tests We configure an EnforceConfig.cmake script to load at CTest time. Previously we loaded it from Tests/CTestTestfile.cmake, but now we load it from the top level so it applies to all tests.
2009-12-10 18:33:42 +03:00
TEST_INCLUDE_FILE "${CMake_BINARY_DIR}/Tests/EnforceConfig.cmake")
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# where to write the resulting executables and libraries
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(BUILD_SHARED_LIBS OFF)
set(EXECUTABLE_OUTPUT_PATH "" CACHE INTERNAL "No configurable exe dir.")
set(LIBRARY_OUTPUT_PATH "" CACHE INTERNAL
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
"Where to put the libraries for CMake")
COMP: CMake should be build static. Also propagate build_shared_libs to curl
2005-03-01 22:21:45 +03:00
COMP: enable RPATH if any of the CMAKE_USE_SYSTEM_XXX variables is enabled or if the curses library is neither in /lib nor in /usr/lib . This makes it build on NetBSD. For more comments see CMakeLists.txt Alex
2007-08-28 19:02:24 +04:00
# The CMake executables usually do not need any rpath to run in the build or
ENH: CMake does not need RPATHs at all for its own executables. Disable them to avoid relinking during installation.
2006-03-02 03:00:08 +03:00
# install tree.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_SKIP_RPATH ON CACHE INTERNAL "CMake does not need RPATHs.")
ENH: CMake does not need RPATHs at all for its own executables. Disable them to avoid relinking during installation.
2006-03-02 03:00:08 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_DATA_DIR "/share/cmake-${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}" CACHE STRING
ENH: Added optional configuration of data/doc/man dirs. This will be useful for package maintainers.
2003-07-22 00:38:53 +04:00
"Install location for data (relative to prefix).")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_DOC_DIR "/doc/cmake-${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}" CACHE STRING
ENH: Added optional configuration of data/doc/man dirs. This will be useful for package maintainers.
2003-07-22 00:38:53 +04:00
"Install location for documentation (relative to prefix).")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_MAN_DIR "/man" CACHE STRING
ENH: Added optional configuration of data/doc/man dirs. This will be useful for package maintainers.
2003-07-22 00:38:53 +04:00
"Install location for man pages (relative to prefix).")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
mark_as_advanced(CMAKE_DATA_DIR CMAKE_DOC_DIR CMAKE_MAN_DIR)
if(CYGWIN AND EXISTS "${CMAKE_ROOT}/Modules/CPack.cmake")
Fix CMake data and doc paths in Cygwin package Override CMAKE_DOC_DIR and CMAKE_DATA_DIR cache entries on Cygwin early enough so the new values are used everywhere. Previously only some of the uses were overridden. Also set CPACK_PACKAGE_VERSION to the whole CMake_VERSION so that the Cygwin MANIFEST file goes in the proper path.
2010-06-09 19:34:38 +04:00
# Force doc, data and man dirs to conform to cygwin layout.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_DOC_DIR "/share/doc/cmake-${CMake_VERSION}")
set(CMAKE_DATA_DIR "/share/cmake-${CMake_VERSION}")
set(CMAKE_MAN_DIR "/share/man")
Fix CMake data and doc paths in Cygwin package Override CMAKE_DOC_DIR and CMAKE_DATA_DIR cache entries on Cygwin early enough so the new values are used everywhere. Previously only some of the uses were overridden. Also set CPACK_PACKAGE_VERSION to the whole CMake_VERSION so that the Cygwin MANIFEST file goes in the proper path.
2010-06-09 19:34:38 +04:00
# let the user know we just forced these values
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
message(STATUS "Setup for Cygwin packaging")
message(STATUS "Override cache CMAKE_DOC_DIR = ${CMAKE_DOC_DIR}")
message(STATUS "Override cache CMAKE_DATA_DIR = ${CMAKE_DATA_DIR}")
message(STATUS "Override cache CMAKE_MAN_DIR = ${CMAKE_MAN_DIR}")
endif()
string(REGEX REPLACE "^/" "" CMake_DATA_DEST "${CMAKE_DATA_DIR}")
string(REGEX REPLACE "^/" "" CMake_DOC_DEST "${CMAKE_DOC_DIR}")
if(BUILD_TESTING)
include(${CMake_SOURCE_DIR}/Tests/CMakeInstall.cmake)
endif()
Test 'install' target of CMake itself We create option CMake_TEST_INSTALL to enable a new CMake.Install test. It tests running the "make install" target to install CMake itself into a test directory. We enable the option by default for dashboard builds.
2009-12-10 18:34:36 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# include special compile flags for some compilers
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include(CompileFlags.cmake)
ENH: Merged use of kwsys library.
2003-06-23 16:58:58 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# no clue why we are testing for this here
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include(CheckSymbolExists)
ENH: Simplify the test
2006-03-18 00:14:04 +03:00
CHECK_SYMBOL_EXISTS(unsetenv "stdlib.h" HAVE_UNSETENV)
CHECK_SYMBOL_EXISTS(environ "stdlib.h" HAVE_ENVIRON_NOT_REQUIRE_PROTOTYPE)
Add CMAKE_TESTS_CDASH_SERVER variable and CTestSubmitLargeOutput test. If defined and non-empty, the value of CMAKE_TESTS_CDASH_SERVER should point to a CDash server willing to accept submissions for a project named PublicDashboard. On machines that also run a CDash dashboard, set this variable to "http://localhost/CDash-trunk-Testing" so that the CMake tests that submit dashboards do not have to send those submissions over the wire. The CTestSubmitLargeOutput test runs a dashboard that has a test that produces very large amount of output on stdout/stderr. Since we do not even want to attempt to send such large output over the wire, this test is off by default unless the CMAKE_TESTS_CDASH_SERVER server is localhost. This test is expected to cause a submission failure when sent to CDash. It passes if the submit results contain error output. It fails if the submit succeeds. CMAKE_TESTS_CDASH_SERVER: CDash server used by CMake/Tests. If not defined or "", this variable defaults to the server at http://www.cdash.org/CDash. If set explicitly to "NOTFOUND", curl tests and ctest tests that use the network are skipped. If set to something starting with "http://localhost/", the CDash is expected to be an instance of CDash used for CDash testing, pointing to a cdash4simpletest database. In these cases, the CDash dashboards should be run first.
2010-03-08 20:14:47 +03:00
# CMAKE_TESTS_CDASH_SERVER: CDash server used by CMake/Tests.
#
# If not defined or "", this variable defaults to the server at
# http://www.cdash.org/CDash.
#
# If set explicitly to "NOTFOUND", curl tests and ctest tests that use
# the network are skipped.
#
# If set to something starting with "http://localhost/", the CDash is
# expected to be an instance of CDash used for CDash testing, pointing
# to a cdash4simpletest database. In these cases, the CDash dashboards
# should be run first.
#
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if("x${CMAKE_TESTS_CDASH_SERVER}" STREQUAL "x")
set(CMAKE_TESTS_CDASH_SERVER "http://www.cdash.org/CDash")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Add CMAKE_TESTS_CDASH_SERVER variable and CTestSubmitLargeOutput test. If defined and non-empty, the value of CMAKE_TESTS_CDASH_SERVER should point to a CDash server willing to accept submissions for a project named PublicDashboard. On machines that also run a CDash dashboard, set this variable to "http://localhost/CDash-trunk-Testing" so that the CMake tests that submit dashboards do not have to send those submissions over the wire. The CTestSubmitLargeOutput test runs a dashboard that has a test that produces very large amount of output on stdout/stderr. Since we do not even want to attempt to send such large output over the wire, this test is off by default unless the CMAKE_TESTS_CDASH_SERVER server is localhost. This test is expected to cause a submission failure when sent to CDash. It passes if the submit results contain error output. It fails if the submit succeeds. CMAKE_TESTS_CDASH_SERVER: CDash server used by CMake/Tests. If not defined or "", this variable defaults to the server at http://www.cdash.org/CDash. If set explicitly to "NOTFOUND", curl tests and ctest tests that use the network are skipped. If set to something starting with "http://localhost/", the CDash is expected to be an instance of CDash used for CDash testing, pointing to a cdash4simpletest database. In these cases, the CDash dashboards should be run first.
2010-03-08 20:14:47 +03:00
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
# build the utilities (a macro defined in this file)
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
CMAKE_BUILD_UTILITIES()
support testing
2001-06-12 21:30:13 +04:00
COMP: enable RPATH if any of the CMAKE_USE_SYSTEM_XXX variables is enabled or if the curses library is neither in /lib nor in /usr/lib . This makes it build on NetBSD. For more comments see CMakeLists.txt Alex
2007-08-28 19:02:24 +04:00
# On NetBSD ncurses is required, since curses doesn't have the wsyncup()
# function. ncurses is installed via pkgsrc, so the library is in /usr/pkg/lib,
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
# which isn't in the default linker search path. So without RPATH ccmake
COMP: enable RPATH if any of the CMAKE_USE_SYSTEM_XXX variables is enabled or if the curses library is neither in /lib nor in /usr/lib . This makes it build on NetBSD. For more comments see CMakeLists.txt Alex
2007-08-28 19:02:24 +04:00
# doesn't run and the build doesn't succeed since ccmake is executed for
# generating the documentation.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(BUILD_CursesDialog)
get_filename_component(_CURSES_DIR "${CURSES_LIBRARY}" PATH)
set(CURSES_NEED_RPATH FALSE)
if(NOT "${_CURSES_DIR}" STREQUAL "/lib" AND NOT "${_CURSES_DIR}" STREQUAL "/usr/lib" AND NOT "${_CURSES_DIR}" STREQUAL "/lib64" AND NOT "${_CURSES_DIR}" STREQUAL "/usr/lib64")
set(CURSES_NEED_RPATH TRUE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if(BUILD_QtDialog)
if(APPLE)
set(CMAKE_BUNDLE_NAME
ENH: support for cpack and install of cmake-gui as mac app bundle
2008-02-16 21:05:03 +03:00
"CMake ${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}-${CMake_VERSION_PATCH}")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_BUNDLE_LOCATION "${CMAKE_INSTALL_PREFIX}")
ENH: install seems to be working for cmake-gui
2008-02-18 23:50:37 +03:00
# make sure CMAKE_INSTALL_PREFIX ends in /
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
string(LENGTH "${CMAKE_INSTALL_PREFIX}" LEN)
math(EXPR LEN "${LEN} -1" )
string(SUBSTRING "${CMAKE_INSTALL_PREFIX}" ${LEN} 1 ENDCH)
if(NOT "${ENDCH}" STREQUAL "/")
set(CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}/")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_INSTALL_PREFIX
ENH: install the mac application bundle into /Applications directly with no enclosing folder
2008-04-05 00:02:50 +04:00
"${CMAKE_INSTALL_PREFIX}${CMAKE_BUNDLE_NAME}.app/Contents")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(QT_NEED_RPATH FALSE)
if(NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib64" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib64")
set(QT_NEED_RPATH TRUE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endif()
COMP: use RPATH is building QtDialog and the Qt libs are not in /lib or /usr/lib (same logic as for ccmake) Alex
2007-11-06 02:06:02 +03:00
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
# The same might be true on other systems for other libraries.
Remove trailing whitespace from most CMake and C/C++ code Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
2012-08-13 21:42:58 +04:00
# Then only enable RPATH if we have are building at least with cmake 2.4,
COMP: enable RPATH if any of the CMAKE_USE_SYSTEM_XXX variables is enabled or if the curses library is neither in /lib nor in /usr/lib . This makes it build on NetBSD. For more comments see CMakeLists.txt Alex
2007-08-28 19:02:24 +04:00
# since this one has much better RPATH features than cmake 2.2.
# The executables are then built with the RPATH for the libraries outside
# the build tree, which is both the build and the install RPATH.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
if (UNIX)
if( CMAKE_USE_SYSTEM_CURL OR CMAKE_USE_SYSTEM_ZLIB
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
OR CMAKE_USE_SYSTEM_EXPAT OR CTEST_USE_XMLRPC OR CURSES_NEED_RPATH OR QT_NEED_RPATH)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(CMAKE_SKIP_RPATH OFF CACHE INTERNAL "CMake built with RPATH.")
set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
set(CMAKE_BUILD_WITH_INSTALL_RPATH TRUE)
endif(CMAKE_USE_SYSTEM_CURL OR CMAKE_USE_SYSTEM_ZLIB
ENH: Disable the xmlrpc drop method by default We've chosen to drop our default dependence on xmlrpc. Thus we disable the corresponding CTest submission method and remove the sources for building xmlrpc locally. Users can re-enable the method by setting the CTEST_USE_XMLRPC option to use a system-installed xmlrpc library.
2009-06-11 19:24:56 +04:00
OR CMAKE_USE_SYSTEM_EXPAT OR CTEST_USE_XMLRPC OR CURSES_NEED_RPATH OR QT_NEED_RPATH)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif ()
COMP: enable RPATH if any of the CMAKE_USE_SYSTEM_XXX variables is enabled or if the curses library is neither in /lib nor in /usr/lib . This makes it build on NetBSD. For more comments see CMakeLists.txt Alex
2007-08-28 19:02:24 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# add the uninstall support
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(
ENH: Add uninstall. This is not really a feature but more of an example on how to do it.
2005-01-18 16:58:27 +03:00
"${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
@ONLY)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_custom_target(uninstall
ENH: Add uninstall. This is not really a feature but more of an example on how to do it.
2005-01-18 16:58:27 +03:00
"${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")
ENH: added some release support
2005-06-28 18:56:29 +04:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
include (CMakeCPack.cmake)
ENH: use a safer check for CPack
2006-01-05 17:18:13 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# setup some Testing support (a macro defined in this file)
CMAKE_SETUP_TESTING()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
configure_file(
ENH: make DartLocal.conf part of project
2007-06-29 19:18:08 +04:00
"${CMAKE_CURRENT_SOURCE_DIR}/DartLocal.conf.in"
"${CMAKE_CURRENT_BINARY_DIR}/DartLocal.conf"
COPYONLY)
BUG: allow system information to accept the -G option
2007-02-28 20:25:19 +03:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
option(CMAKE_STRICT
ENH: move CMAKE_STRICT option to the top
2007-11-06 22:14:18 +03:00
"Perform strict testing to record property and variable access. Can be used to report any undefined properties or variables" OFF)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
mark_as_advanced(CMAKE_STRICT)
ENH: move CMAKE_STRICT option to the top
2007-11-06 22:14:18 +03:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# build the remaining subdirectories
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_subdirectory(Source)
add_subdirectory(Utilities)
add_subdirectory(Tests)
BUG: allow system information to accept the -G option
2007-02-28 20:25:19 +03:00
CMake: Reference test targets only when BUILD_TESTING is ON You cannot set a property on a target that's not there, and these targets are not there when BUILD_TESTING is OFF. Thanks to Sankhesh Jhaveri for the bug report.
2011-09-14 18:38:04 +04:00
if(BUILD_TESTING)
CMAKE_SET_TARGET_FOLDER(CMakeLibTests "Tests")
endif()
Add FOLDER target property, for IDEs (#3796) This work was started from a patch by Thomas Schiffer. Thanks, Thomas! See the newly added documentation of the FOLDER target property for details. Also added global properties, USE_FOLDERS and PREDEFINED_TARGETS_FOLDER. See new docs here, too. By default, the FOLDER target property is used to organize targets into folders in IDEs that have support for such organization. This commit adds "solution folder" support to the Visual Studio generators. Currently works with versions 7 through 10. Also, use the new FOLDER property in the ExternalProject test and in the CMake project itself.
2010-09-03 21:53:22 +04:00
CMAKE_SET_TARGET_FOLDER(cmw9xcom "Utilities/Win9xCompat")
CMAKE_SET_TARGET_FOLDER(documentation "Documentation")
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
# add a test
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_test(SystemInformationNew "${CMAKE_CMAKE_COMMAND}"
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
--system-information -G "${CMAKE_TEST_GENERATOR}" )
BUG: possible fix for new SystemInfo test
2007-02-27 21:04:29 +03:00
Install Copyright.txt
2009-09-28 19:35:52 +04:00
# Install license file as it requires.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
install(FILES Copyright.txt DESTINATION ${CMake_DOC_DEST})
Install Copyright.txt
2009-09-28 19:35:52 +04:00
ENH: Install all Modules and Templates This removes the file-wise installation rules for Modules and Templates and instead installs the whole directories. This approach is much less error-prone. The old approach was left from before CMake had the install(DIRECTORY) command.
2009-07-24 21:17:41 +04:00
# Install script directories.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
install(
ENH: Install all Modules and Templates This removes the file-wise installation rules for Modules and Templates and instead installs the whole directories. This approach is much less error-prone. The old approach was left from before CMake had the install(DIRECTORY) command.
2009-07-24 21:17:41 +04:00
DIRECTORY Modules Templates
DESTINATION "${CMake_DATA_DEST}"
FILE_PERMISSIONS OWNER_READ OWNER_WRITE GROUP_READ WORLD_READ
DIRECTORY_PERMISSIONS OWNER_READ OWNER_EXECUTE OWNER_WRITE
GROUP_READ GROUP_EXECUTE
WORLD_READ WORLD_EXECUTE
Fix permsissions of installed SquishRunTestCase.sh This commit fixes permissions of Modules/SquishRunTestCase.sh after installation. Previously install() removed executable permissions. Patch from Modestas Vainius. See issue #9659.
2009-10-05 18:28:37 +04:00
PATTERN "*.sh*" PERMISSIONS OWNER_READ OWNER_EXECUTE OWNER_WRITE
GROUP_READ GROUP_EXECUTE
WORLD_READ WORLD_EXECUTE
ENH: Install all Modules and Templates This removes the file-wise installation rules for Modules and Templates and instead installs the whole directories. This approach is much less error-prone. The old approach was left from before CMake had the install(DIRECTORY) command.
2009-07-24 21:17:41 +04:00
)
Enhancement of bash completion scripts given by Igor Murzov. The orginal patch has been reworked in order to follow CMake source tree layout habit. Inspired-By: Igor Murzov <e-mail@date.by>
2012-04-22 21:08:29 +04:00
# process docs related install
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
add_subdirectory(Docs)
Enhancement of bash completion scripts given by Igor Murzov. The orginal patch has been reworked in order to follow CMake source tree layout habit. Inspired-By: Igor Murzov <e-mail@date.by>
2012-04-22 21:08:29 +04:00
ENH: more cleanup of some CMakeLists files
2007-05-11 17:02:17 +04:00
#-----------------------------------------------------------------------
# End of the main section of the CMakeLists file
#-----------------------------------------------------------------------
Fix installation of CMake itself CMake 2.8.0 and below use the EXECUTABLE_OUTPUT_PATH setting from the top-level CMakeLists.txt file to compute the location of the "cmake" target for the special case of installing cmake over itself. The commit "Clean up CMake build tree 'bin' directory" moved the setting of EXECUTABLE_OUTPUT_PATH that affects the "cmake" target into the Source subdirectory. This broke the special-case lookup in the top level. We fix it by setting EXECUTABLE_OUTPUT_PATH at the end of the top-level CMakeLists.txt file. Now that we use add_subdirectory to process the subdirectories in order, this setting does not affect the subdirectories. Thus we fix installation while preserving the clean build tree 'bin' directory intended by the above-mentioned commit.
2009-12-10 17:10:12 +03:00
# As a special case when building CMake itself, CMake 2.8.0 and below
# look up EXECUTABLE_OUTPUT_PATH in the top-level CMakeLists.txt file
# to compute the location of the "cmake" executable. We set it here
# so that those CMake versions can find it. We wait until after all
# the add_subdirectory() calls to avoid affecting the subdirectories.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:47:32 +04:00
set(EXECUTABLE_OUTPUT_PATH ${CMake_BIN_DIR})