kolan
/
CMake
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
CMake/Tests/CPackComponentsForAll/RunCPackVerifyResult.cmake

211 lines
9.0 KiB
CMake
Raw Normal View History

CPack new tests for component install
2010-12-03 00:56:26 +03:00
message(STATUS "=============================================================================")
message(STATUS "CTEST_FULL_OUTPUT (Avoid ctest truncation of output)")
message(STATUS "")
if(NOT CPackComponentsForAll_BINARY_DIR)
message(FATAL_ERROR "CPackComponentsForAll_BINARY_DIR not set")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack new tests for component install
2010-12-03 00:56:26 +03:00
if(NOT CPackGen)
message(FATAL_ERROR "CPackGen not set")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Tests: Use the right path to CPack value for running CPack tests These tests were not running properly on Visual Studio or Xcode dashboards before this commit because of the "Debug" or "Release" sub-directory. The scripts already have CMAKE_CPACK_COMMAND since the correct CMake executable is used to run the scripts, so just use that, rather than passing down an incorrect path to the CPack executable.
2012-11-29 02:01:25 +04:00
message("CMAKE_CPACK_COMMAND = ${CMAKE_CPACK_COMMAND}")
if(NOT CMAKE_CPACK_COMMAND)
message(FATAL_ERROR "CMAKE_CPACK_COMMAND not set")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
if(NOT CPackComponentWay)
message(FATAL_ERROR "CPackComponentWay not set")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
CPack new tests for component install
2010-12-03 00:56:26 +03:00
set(expected_file_mask "")
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
# The usual default behavior is to expect a single file
CPackTest spit out more output in case of failure
2010-12-12 14:19:50 +03:00
# Then some specific generators (Archive, RPM, ...)
# May produce several numbers of files depending on
# CPACK_COMPONENT_xxx values
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
set(expected_count 1)
Change cpack run and verify script to work with multi-config generators. Use the location of the running cmake to find cpack, and use the CMAKE_CONFIG_TYPE environtment variable as a type for cpack.
2010-12-14 21:42:21 +03:00
set(config_type $ENV{CMAKE_CONFIG_TYPE})
set(config_args )
if(config_type)
set(config_args -C ${config_type})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPackRPM add more trace output in order to help failing diagnostics
2011-03-10 11:48:46 +03:00
set(config_verbose )
CPackTest spit out more output in case of failure
2010-12-12 14:19:50 +03:00
CPack new tests for component install
2010-12-03 00:56:26 +03:00
if(CPackGen MATCHES "ZIP")
set(expected_file_mask "${CPackComponentsForAll_BINARY_DIR}/MyLib-*.zip")
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
if (${CPackComponentWay} STREQUAL "default")
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "OnePackPerGroup")
CPackArchive package all components specified in CPACK_COMPONENTS_ALL When asking for group packaging the components not belonging to any group should be packaged separately.
2011-03-03 23:19:13 +03:00
set(expected_count 3)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "IgnoreGroup")
CPack Tests the different ways of packaging components
2011-01-30 15:11:25 +03:00
set(expected_count 4)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "AllInOne")
CPackRPM activate CPackRPM test on Linux systems where rpmbuild is found
2011-03-03 22:45:43 +03:00
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
endif ()
CPackRPM activate CPackRPM test on Linux systems where rpmbuild is found
2011-03-03 22:45:43 +03:00
elseif (CPackGen MATCHES "RPM")
CPackRPM add more trace output in order to help failing diagnostics
2011-03-10 11:48:46 +03:00
set(config_verbose -D "CPACK_RPM_PACKAGE_DEBUG=1")
CPackRPM activate CPackRPM test on Linux systems where rpmbuild is found
2011-03-03 22:45:43 +03:00
set(expected_file_mask "${CPackComponentsForAll_BINARY_DIR}/MyLib-*.rpm")
if (${CPackComponentWay} STREQUAL "default")
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "OnePackPerGroup")
set(expected_count 3)
elseif (${CPackComponentWay} STREQUAL "IgnoreGroup")
CPackRPM activate CPackRPM test on Linux systems where rpmbuild is found
2011-03-03 22:45:43 +03:00
set(expected_count 4)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "AllInOne")
set(expected_count 1)
endif ()
elseif (CPackGen MATCHES "DEB")
set(expected_file_mask "${CPackComponentsForAll_BINARY_DIR}/MyLib-*.deb")
if (${CPackComponentWay} STREQUAL "default")
CPack Tests the different ways of packaging components
2011-01-30 15:11:25 +03:00
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
elseif (${CPackComponentWay} STREQUAL "OnePackPerGroup")
set(expected_count 3)
elseif (${CPackComponentWay} STREQUAL "IgnoreGroup")
set(expected_count 4)
elseif (${CPackComponentWay} STREQUAL "AllInOne")
CPack Tests the different ways of packaging components
2011-01-30 15:11:25 +03:00
set(expected_count 1)
CPack fix #11930 and simplifies component packaging options
2011-03-23 20:28:05 +03:00
endif ()
endif()
CPack new tests for component install
2010-12-03 00:56:26 +03:00
Add component support to DragNDrop generator.
2011-03-28 19:11:27 +04:00
if(CPackGen MATCHES "DragNDrop")
set(expected_file_mask "${CPackComponentsForAll_BINARY_DIR}/MyLib-*.dmg")
if (${CPackComponentWay} STREQUAL "default")
set(expected_count 1)
elseif (${CPackComponentWay} STREQUAL "OnePackPerGroup")
set(expected_count 3)
elseif (${CPackComponentWay} STREQUAL "IgnoreGroup")
set(expected_count 4)
elseif (${CPackComponentWay} STREQUAL "AllInOne")
set(expected_count 1)
endif ()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
Add component support to DragNDrop generator.
2011-03-28 19:11:27 +04:00
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
# clean-up previously CPack generated files
if(expected_file_mask)
file(GLOB expected_file "${expected_file_mask}")
if (expected_file)
file(REMOVE ${expected_file})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endif()
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
CPackRPM add more trace output in order to help failing diagnostics
2011-03-10 11:48:46 +03:00
message("config_args = ${config_args}")
message("config_verbose = ${config_verbose}")
Tests: Use the right path to CPack value for running CPack tests These tests were not running properly on Visual Studio or Xcode dashboards before this commit because of the "Debug" or "Release" sub-directory. The scripts already have CMAKE_CPACK_COMMAND since the correct CMake executable is used to run the scripts, so just use that, rather than passing down an incorrect path to the CPack executable.
2012-11-29 02:01:25 +04:00
execute_process(COMMAND ${CMAKE_CPACK_COMMAND} ${config_verbose} -G ${CPackGen} ${config_args}
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
RESULT_VARIABLE CPack_result
OUTPUT_VARIABLE CPack_output
ERROR_VARIABLE CPack_error
WORKING_DIRECTORY ${CPackComponentsForAll_BINARY_DIR})
if (CPack_result)
message(FATAL_ERROR "error: CPack execution went wrong!, CPack_output=${CPack_output}, CPack_error=${CPack_error}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
else ()
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
message(STATUS "CPack_output=${CPack_output}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack remove previously CPack generated files (if any) before running CPack
2011-02-24 02:43:29 +03:00
CPack Default component test for ZIP should be OK
2010-12-11 13:59:02 +03:00
# Now verify if the number of expected file is OK
# - using expected_file_mask and
# - expected_count
CPack new tests for component install
2010-12-03 00:56:26 +03:00
if(expected_file_mask)
file(GLOB expected_file "${expected_file_mask}")
message(STATUS "expected_count='${expected_count}'")
message(STATUS "expected_file='${expected_file}'")
message(STATUS "expected_file_mask='${expected_file_mask}'")
if(NOT expected_file)
Arrange output in a better way
2010-12-13 00:35:18 +03:00
message(FATAL_ERROR "error: expected_file=${expected_file} does not exist: CPackComponentsForAll test fails. (CPack_output=${CPack_output}, CPack_error=${CPack_error}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
CPack new tests for component install
2010-12-03 00:56:26 +03:00
list(LENGTH expected_file actual_count)
message(STATUS "actual_count='${actual_count}'")
if(NOT actual_count EQUAL expected_count)
Arrange output in a better way
2010-12-13 00:35:18 +03:00
message(FATAL_ERROR "error: expected_count=${expected_count} does not match actual_count=${actual_count}: CPackComponents test fails. (CPack_output=${CPack_output}, CPack_error=${CPack_error})")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 21:50:14 +04:00
endif()
endif()
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
# Validate content
if(CPackGen MATCHES "RPM")
find_program(RPM_EXECUTABLE rpm)
if(NOT RPM_EXECUTABLE)
message(FATAL_ERROR "error: missing rpm executable required by the test")
endif()
set(CPACK_RPM_PACKAGE_SUMMARY "default summary")
set(CPACK_RPM_libraries_PACKAGE_SUMMARY "libraries summary")
set(CPACK_RPM_libraries_PACKAGE_DESCRIPTION "libraries description")
set(CPACK_COMPONENT_APPLICATIONS_DESCRIPTION
"An extremely useful application that makes use of MyLib")
set(CPACK_COMPONENT_HEADERS_DESCRIPTION
"C/C\\+\\+ header files for use with MyLib")
if(${CPackComponentWay} STREQUAL "IgnoreGroup")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
# set gnu install prefixes to what they are set during rpm creation
# CMAKE_SIZEOF_VOID_P is not set here but lib is prefix of lib64 so
# relocation path test won't fail on OSes with lib64 library location
include(GNUInstallDirs)
set(CPACK_PACKAGING_INSTALL_PREFIX "/usr")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
foreach(check_file ${expected_file})
string(REGEX MATCH ".*libraries.*" check_file_libraries_match ${check_file})
string(REGEX MATCH ".*headers.*" check_file_headers_match ${check_file})
string(REGEX MATCH ".*applications.*" check_file_applications_match ${check_file})
string(REGEX MATCH ".*Unspecified.*" check_file_Unspecified_match ${check_file})
execute_process(COMMAND ${RPM_EXECUTABLE} -pqi ${check_file}
OUTPUT_VARIABLE check_file_content
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
if(check_file_libraries_match)
set(check_file_match_expected_summary ".*${CPACK_RPM_libraries_PACKAGE_SUMMARY}.*")
set(check_file_match_expected_description ".*${CPACK_RPM_libraries_PACKAGE_DESCRIPTION}.*")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
set(check_file_match_expected_relocation_path "Relocations : ${CPACK_PACKAGING_INSTALL_PREFIX} ${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
set(spec_regex "*libraries*")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
elseif(check_file_headers_match)
set(check_file_match_expected_summary ".*${CPACK_RPM_PACKAGE_SUMMARY}.*")
set(check_file_match_expected_description ".*${CPACK_COMPONENT_HEADERS_DESCRIPTION}.*")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
set(check_file_match_expected_relocation_path "Relocations : ${CPACK_PACKAGING_INSTALL_PREFIX} ${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_INCLUDEDIR}")
set(spec_regex "*headers*")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
elseif(check_file_applications_match)
set(check_file_match_expected_summary ".*${CPACK_RPM_PACKAGE_SUMMARY}.*")
set(check_file_match_expected_description ".*${CPACK_COMPONENT_APPLICATIONS_DESCRIPTION}.*")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
set(check_file_match_expected_relocation_path "Relocations : ${CPACK_PACKAGING_INSTALL_PREFIX} ${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_BINDIR}")
set(spec_regex "*applications*")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
elseif(check_file_Unspecified_match)
set(check_file_match_expected_summary ".*${CPACK_RPM_PACKAGE_SUMMARY}.*")
set(check_file_match_expected_description ".*DESCRIPTION.*")
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
set(check_file_match_expected_relocation_path "Relocations : ${CPACK_PACKAGING_INSTALL_PREFIX} ${CPACK_PACKAGING_INSTALL_PREFIX}/${CMAKE_INSTALL_BINDIR}")
set(spec_regex "*Unspecified*")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
else()
message(FATAL_ERROR "error: unexpected rpm package '${check_file}'")
endif()
string(REGEX MATCH ${check_file_match_expected_summary} check_file_match_summary ${check_file_content})
if(NOT check_file_match_summary)
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
message(FATAL_ERROR "error: '${check_file}' rpm package summary does not match expected value - regex '${check_file_match_expected_summary}'; RPM output: '${check_file_content}'")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
endif()
string(REGEX MATCH ${check_file_match_expected_description} check_file_match_description ${check_file_content})
if(NOT check_file_match_description)
CPackRPM: Allow multiple path relocation prefixes for one package
2015-01-21 02:29:46 +03:00
message(FATAL_ERROR "error: '${check_file}' rpm package description does not match expected value - regex '${check_file_match_expected_description}'; RPM output: '${check_file_content}'")
endif()
string(REGEX MATCH ${check_file_match_expected_relocation_path} check_file_match_relocation_path ${check_file_content})
if(NOT check_file_match_relocation_path)
file(GLOB_RECURSE spec_file "${CPackComponentsForAll_BINARY_DIR}/${spec_regex}.spec")
if(spec_file)
file(READ ${spec_file} spec_file_content)
endif()
message(FATAL_ERROR "error: '${check_file}' rpm package relocation path does not match expected value - regex '${check_file_match_expected_relocation_path}'; RPM output: '${check_file_content}'; generated spec file: '${spec_file_content}'")
CPackRPM: Add component based packaging description and summary Enable per-component description and summary setting through CPACK_RPM_<component>_PACKAGE_DESCRIPTION, CPACK_COMPONENT_<compName>_DESCRIPTION and CPACK_RPM_<component>_PACKAGE_SUMMARY variables. Extend the CPackComponentsForAll test to cover these.
2014-10-14 09:57:11 +04:00
endif()
endforeach()
elseif(${CPackComponentWay} STREQUAL "IgnoreGroup")
endif()
endif()